Wire Spring Hose Clamps, Ø 100 mm, 2-piece Set
Fits 100 mm extraction hoses.
These spring-type hose clamps allow quick changing of suction hoses from one machine to another. Operable with one hand, the two levers can be pressed together to release the clamp. Ideal for small workshops when one suction hose is used for several machines.
- Nominal diameter 1 100 mm
| Article no. | 730893 |
| Brand | - |
Suitable for
Dust Hood, 410 x 325 mm
Rectangular plastic funnel with spigot to fit 100 mm extraction hoses. For collecting and extracting shavings on e.g. table saws, surface planers and wherever there are no specific extraction connectors.
€19.90
incl. VAT plus shipping costs
Article No. 720549
Extraction Hose, Ø 100 mm x 4 m
Flexible, steel wire reinforced hose with rubber cuffs at each end. Ideal for mobile extractors in the workshop. The rubber cuffs can suit extraction outlets of around 100 to 110 mm diameter quickly and easily.
€136.00
incl. VAT plus shipping costs
Article No. 720547
Extraction Hose, Ø 100 mm x 2 m
Flexible, steel wire reinforced hose with rubber cuffs at each end. Ideal for mobile extractors in the workshop. The rubber cuffs can suit extraction outlets of around 100 to 110 mm diameter quickly and easily.
€89.00
incl. VAT plus shipping costs
Article No. 720546
Extraction Funnel 250 x 100 mm, Ø 100 mm
Funnel-shaped extraction hood with intake size of 250 x 100 mm. Ideal for vacuuming, e.g. on the lathe or for floor cleaning. Depth 270 mm.
€17.90
incl. VAT plus shipping costs
Article No. 727646
Extraction Trough, 311 x 311 mm
Rectangular plastic connection with connection piece for 100 mm suction hoses. The flat trough can be used where there is no space available for conventional funnels. For collecting and extracting chips from e.g. table saws, planing...
€16.90
incl. VAT plus shipping costs
Article No. 727648
Extraction Trough, 343 x 203 mm
Rectangular plastic connection with connection piece for 100 mm suction hoses. The flat trough can be used where there is no space available for conventional funnels. For collecting and extracting chips from e.g. table saws, planing...
€17.90
incl. VAT plus shipping costs
Article No. 727649
Extraction Outlet Round, Ø 100 mm
Connection piece with flange for mounting on machine housings. For 100 mm extraction hoses. Flange diameter 143 mm, bolt circle diameter 128 mm, hole spacing 90 x 90 mm.
€7.50
incl. VAT plus shipping costs
Article No. 727650
Vacuum Tool Port Adapter, Rigid/Flexible, Ø 100 mm
The flexible part of the connector enables diameter tolerances of extraction pipes to be bridged. Suction hoses with Ø 105 mm (4 inches) are connected to the rigid end. The flexible end can be connected to pipes from Ø 95 mm to Ø 105 mm.
€16.90
incl. VAT plus shipping costs
Article No. 730822
Axminster Workshop AW82E Dust Extractor
The AW82E is a compact, mobile chip extractor for use around a small workshop. It is powered by a 1.1 kW induction motor, which produces quite a substantial airflow of 1050 m³/h. The better-than-average performance makes it perfect for...
€389.00
incl. VAT plus shipping costs
Article No. 745281
Axminster Workshop AW153E Dust Extractor
This is the largest extractor in the Axminster Workshop range. The 1.5-kW motor gives an airflow of 1165 m³/h using 100 mm hose and 1720 m³/h using 125 mm hose. The AW153E has a single 125 mm inlet and comes with a twin 100 mm adaptor...
€525.00
incl. VAT plus shipping costs
Article No. 745282
Axminster Professional AP50E Dust Extractor
This wall mounted extractor is perfectly suited to small workshops. It is especially suited to situations where floor space is at a premium. Well-constructed and efficient, its 750 W motor generates 920 m³/h of airflow and is fitted with...
€649.00
incl. VAT plus shipping costs
Article No. 745283
DICTUM Extraction Unit SSA 5200 Twin
With an extraction capacity of 5280 m³/h and a total chip bag volume of 400 litres, this extraction system offers top performance. A 400 volt motor with 1.5 kW power and the precisely balanced steel fan with optimised blade shape ensure...
€1,199.00
incl. VAT plus shipping costs
Article No. 725036
DICTUM Extraction Unit SA 1140
This compact dust extraction unit is particularly suitable for use as a mobile single extraction system. With a footprint of only 0.3 m², the system fits almost anywhere and can be quickly relocated on its four caster wheels. Equipped...
€499.00
incl. VAT plus shipping costs
Article No. 725033
DICTUM Extraction Unit SA 2200
An ideal extraction system for small workshops where several machines need to be connected. Two 100 mm suction ports and an extraction capacity of 2220 m³/h allow for simultaneous extraction from multiple machines*. The extraction unit...
€679.00
incl. VAT plus shipping costs
Article No. 725034
DICTUM Extraction Unit SSA 3500
Powerful and efficient extraction system for large extraction and chip volumes. The high performance in terms of air volume flow (m³/h) and negative pressure (Pa), along with the large capacity of the chip collection bag, make this...
€999.00
incl. VAT plus shipping costs
Article No. 725035