Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
1 of 436
Laurin Carbon Steel Blade, Lapland, Blade Length 145 mm

Laurin Carbon Steel Blade, Lapland

Due to the wide blade shape it is ideal for the production of a Scandinavian knife. High sharpness due to 80CrV2 carbon steel, not rustproof. Hardened to 58 HRC. Blades come neither sharpened nor polished. Rustic forging skin.
variants
€18.80

incl. VAT plus shipping costs

Article No. 830953

Laurin Carbon Steel Blade, Lapland, Blade Length 120 mm

Laurin Carbon Steel Blade, Lapland

Due to the wide blade shape it is ideal for the production of a Scandinavian knife. High sharpness due to 80CrV2 carbon steel, not rustproof. Hardened to 58 HRC. Blades come neither sharpened nor polished. Rustic forging skin.
variants
€16.30

incl. VAT plus shipping costs

Article No. 830952

Laurin Carbon Steel Blade, Lapland, Blade Length 90 mm

Laurin Carbon Steel Blade, Lapland

Due to the wide blade shape it is ideal for the production of a Scandinavian knife. High sharpness due to 80CrV2 carbon steel, not rustproof. Hardened to 58 HRC. Blades come neither sharpened nor polished. Rustic forging skin.
variants
€13.80

incl. VAT plus shipping costs

Article No. 830951

Japanese Mini Try Square, 60 mm

Japanese Mini Try Squares

Small Japanese try square with stainless steel blade and brass stock, ground. Accuracy 0.1 mm per 100 mm.
variants
€10.90

incl. VAT plus shipping costs

Article No. 717120

Endbutton Clamp

Endbutton Clamp

The ideal tool for removing stubborn end­buttons and for holding endbuttons while shaping their shafts. Screw clamp with leather-lined endbutton holder. Brass body with knurled surface, Ø 25 mm. Fits all violin and viola endbuttons which...
€13.10

incl. VAT plus shipping costs

Article No. 706911

Fingerboard Pads, Violin, Viola

Fingerboard Pads

For an even distribution of clamping pressure when gluing fingerboards in place. Pads with cork lining to prevent risk of surface damage of the neck. The radiuses of both pads perfectly adjusted to the true radiuses of a violin neck and...
€7.80

incl. VAT plus shipping costs

Article No. 735810

Marking Knife »Kogatana« Standard, Right Bevel, Blade Width 18 mm

Marking Knife »Kogatana« Standard, Right bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.
variants
 
€17.40

incl. VAT plus shipping costs

Article No. 710401

Filter Paper „Miyoshinogami”, 10-Piece Set

Filter Paper „Miyoshinogami”, 10-Piece Set

This filter paper is used to filter expensive lacquers before use or after adding pigments, to avoid lumps and impurities in the lacquer later. To use it, you lay several sheets of paper (5-10) on top of each other and pour in the...
€4.70

incl. VAT plus shipping costs

Article No. 716313

Ki Urushi

Ki Urushi

Raw Urushi with a water content of about 25 % for all priming work. The universal base lacquer is suitable for sealing wooden surfaces before applying the lacquer layers as well as for mixing priming coats with clay. This lacquer is also...
€43.90

incl. VAT plus shipping costs

Article No. 716240

Flush Cutting Saw Mini Kugihiki 150

Flush Cutting Saw Mini Kugihiki 150

Simple flush cutting saw with hardwood handle.
€13.90

incl. VAT plus shipping costs

Article No. 712304

Japanese Mini Try Square, 45 mm

Japanese Mini Try Squares

Small Japanese try square with stainless steel blade and brass stock, ground. Accuracy 0.1 mm per 100 mm.
variants
€9.90

incl. VAT plus shipping costs

Article No. 707274

F-Hole Drill Set, Violin, Viola, 10-Piece Set

F-Hole Drill Sets

The ideal tool for cutting perfectly cylindrical f-holes. Centering pin mounted on a beechwood handle. Comes with 10 interchangeable, double-beveled drill bits.
variants
€85.80

incl. VAT plus shipping costs

Article No. 701110

1 of 436