Veritas Star Knob Screw for Parf Dogs
For securing the Veritas Parf Dogs (No. 703907 , 703908 ) from below the worktop. Screw thread M8, length 9 mm. For worktops with a thickness of up to 22 mm.
€2.20
incl. VAT plus shipping costs
Article No. 703909
Wide Blade for Veritas Combination Plane, 12 mm, PM-V11
Fits No. 703982 .
€19.50
incl. VAT plus shipping costs
Article No. 703983
Veritas Low-Angle Spokeshave, PM-V11 blade
A modern version with innovative technology and new materials. Ideal for working on curved and straight workpieces with a difficult grain. The blade, set with the bevel facing up (20° basic bevel with a 25° micro-bevel), forms a cutting...
€75.00
incl. VAT plus shipping costs
Article No. 703923
Veritas Parf Dogs, Long, 1 Pair
Diameter 19.9 mm for exact fit in 20 mm holes, e.g. in the Festool MFT. The 25 x 10 mm support ring offers stability and a good contact surface. 8 mm internal thread for e.g. fixing from below a worktop .
€19.50
incl. VAT plus shipping costs
Article No. 703907
Osborne Head Knife
Long, exact cuts are made with the middle of the blade, tight curves with the tips. Can also be used horizontally for thinning out and skiving leather. Ground ready to use. Red stained beech handle with brass ferrule. 55 HRC.
€74.90
incl. VAT plus shipping costs
Article No. 708534
Patented Lid Can, 100 ml
Can with press-on lid of tin-plated sheet steel for storing paints, varnishes, oils, waxes, pastes or other semi-fluid contents. Not suited for water-based products. With patented ring on the rim. Comes with lid.
€1.60
incl. VAT plus shipping costs
Article No. 800670
Burnmaster Loop Tips Kit, 17-Piece Set
For making your own loop tip shapes. The kit contains one loop that is 460 mm long and 8 pairs of contact tips. Fits Burnmaster Extra Pen No. 715304 .
€52.90
incl. VAT plus shipping costs
Article No. 715324
»Chrome« Bottle Closure Kit, with Sealing Ring
Kit for making a closure for bottles. Thanks to the very long drop shape, the centre is positioned further down than on conventional bottle closures, which prevents the closure from falling out. Silicone sealing rings.
€7.90
incl. VAT plus shipping costs
Article No. 720534
OFFER: ERIKA 85 Ec, Sliding Table, Fence Guide 1m, Drop Stop,...
If the ERIKA 70 Ec cannot handle the required cutting height, there is always its "big sister" - the ERIKA 85 Ec, ideal for large workpieces with a cutting height of up to 85 mm. The unique suction channel concentrates the sawdust and...
€3,211.81
incl. VAT plus shipping costs
Article No. 720475K
SPECIAL OFFER: ERIKA 85 Ec + Extension/ Routertable, 2 Rails,...
This set transforms the MAFELL ERIKA 85 Ec into a multifunctional woodworking centre. Profiling and trimming battens, cutting mortises and tenons, rebating and mitering frames… all with the ERIKA! The extension and router table is...
€3,092.81
incl. VAT plus shipping costs
Article No. 720474K
SPECIAL OFFER: MAFELL Pull-Push Saw ERIKA 85 Ec incl. two...
If the ERIKA 70 Ec cannot handle the required cutting height, there is always its "big sister" - the ERIKA 85 Ec, ideal for large workpieces with a cutting height of up to 85 mm. The unique suction channel concentrates the sawdust and...
€2,854.81
incl. VAT plus shipping costs
Article No. 720473K
OFFER: MAFELL Random Orbit Sander EVA 150E/3 in T-MAX +40...
The EVA 150 E is the random orbital sander of choice for a high removal rate, a clean working environment, and outstanding work outcomes. It offers a 20 percent higher speed than conventional random orbital sanders, which appreciably...
€462.91
incl. VAT plus shipping costs
Article No. 720471K
Viewed