DICTUM Extraction Unit SSA 5200 Twin
With an extraction capacity of 5280 m³/h and a total chip bag volume of 400 litres, this extraction system offers top performance. A 400 volt motor with 1.5 kW power and the precisely balanced steel fan with optimised blade shape ensure a long service life as well as vibration-free and quiet operation. The system is equipped with multiple suction ports (4 x Ø 100 mm) made of sheet steel.
This powerful extraction system is designed for large extraction and chip volumes, offering enough capacity to efficiently extract from multiple machines simultaneously*. The large filter bag surface and two 200-litre chip collection bags make the system, with a total height of 290 cm, suitable for larger room heights (footprint only 0.6 m²). Using 1-micron pleated filter cartridges (No. 725037) reduces the height to 180 cm, making it suitable for standard room heights. The extraction unit comes standard with a 5-micron polyester filter bag.
A handy remote control facilitates turning the unit on/off from up to 50 metres away and through walls. An integrated control light indicates when a filter change is due. The high air volume flow (m³/h) and negative pressure (Pa), as well as the large capacity of the two chip collection bags, make this system ideal for extracting from stationary machines, for sanding dust, sawdust, milling, and planer shavings (we recommend using the Fine Dust Filter Cartridges (No. 725037) for fine sanding dust).
*Please also see the recommendations under Selection criteria.
Benefits and features:
The machine is supplied in easy-to-assemble modules (including step-by-step assembly instructions).
This powerful extraction system is designed for large extraction and chip volumes, offering enough capacity to efficiently extract from multiple machines simultaneously*. The large filter bag surface and two 200-litre chip collection bags make the system, with a total height of 290 cm, suitable for larger room heights (footprint only 0.6 m²). Using 1-micron pleated filter cartridges (No. 725037) reduces the height to 180 cm, making it suitable for standard room heights. The extraction unit comes standard with a 5-micron polyester filter bag.
A handy remote control facilitates turning the unit on/off from up to 50 metres away and through walls. An integrated control light indicates when a filter change is due. The high air volume flow (m³/h) and negative pressure (Pa), as well as the large capacity of the two chip collection bags, make this system ideal for extracting from stationary machines, for sanding dust, sawdust, milling, and planer shavings (we recommend using the Fine Dust Filter Cartridges (No. 725037) for fine sanding dust).
*Please also see the recommendations under Selection criteria.
Benefits and features:
- Sturdy construction made of powder-coated metal components.
- Precisely balanced steel fan with optimised blade shape ensures a long service life as well as vibration-free and quiet operation.
- Dust separator effectively separates the finest airborne particles from the extracted material, preventing premature clogging of filter pores.
- Optimised separation of the air/chip mixture for higher density in the chip collection bag (fewer bag changes required).
- Highly effective filtration of 99.9 % of particles with a size ≥ 5 microns.
- Chip collection bags are supported by sturdy base plate and reliably fixed to the separator with adjustable clamp straps.
- Multiple suction ports in robust sheet steel construction with rubber cover caps.
- The system can also be remotely controlled from adjacent rooms
- Four swivel casters for optimal manoeuvrability in the workshop.
The machine is supplied in easy-to-assemble modules (including step-by-step assembly instructions).
Selection criteria for extraction systems:
The smaller the chip bag volume, the smaller the amount of chips produced by the machine should be. Circular saws generate less chip volume than thickness planers. Planers with a 50 cm planing width produce more chip volume than machines with only a 20 cm planing width.
Consider the simultaneity factor. Is the system extracting from only one machine or several machines simultaneously?
Large extraction openings for small dust particles, e.g. at sanding tables, require a greater air volume flow than the precise extraction of chips, e.g. with bandsaws.
The heavier the chips to be extracted, e.g. wet planer shavings, the higher the negative pressure (also known as differential pressure) should be.
The longer the extraction duct, the more bends or distributors present, the higher the negative pressure (also known as differential pressure) should be.
The following rules should be observed for group extraction (several machines connected to one extraction line):
The smaller the chip bag volume, the smaller the amount of chips produced by the machine should be. Circular saws generate less chip volume than thickness planers. Planers with a 50 cm planing width produce more chip volume than machines with only a 20 cm planing width.
Consider the simultaneity factor. Is the system extracting from only one machine or several machines simultaneously?
Large extraction openings for small dust particles, e.g. at sanding tables, require a greater air volume flow than the precise extraction of chips, e.g. with bandsaws.
The heavier the chips to be extracted, e.g. wet planer shavings, the higher the negative pressure (also known as differential pressure) should be.
The longer the extraction duct, the more bends or distributors present, the higher the negative pressure (also known as differential pressure) should be.
The following rules should be observed for group extraction (several machines connected to one extraction line):
- The total cross-section of all extraction ports to be used simultaneously should not exceed the cross-section of the fan's suction port.
- The ducting should be as short and straight as possible, with branches and bends installed as sparingly as possible.
- Place duct reductions as close to the machine as possible, with smaller diameters always on the machine side.
- Equip machines and devices to be extracted with shut-off valves when several machines and devices are connected to the extraction system.
- Avoid hose lines with high friction resistance and high pressure loss. Flexible hoses have a higher pressure loss compared to rigid, smooth-walled pipes.
Scope of delivery
- Extraction unit dismantled into easy-to-assemble components
- 2 filter bags, Ø 51 cm x 150 cm
- 2 chip collection bags, Ø 51 cm x 127 cm
- 4 suction ports, Ø 100 mm, made of sheet steel
DICTUM
DICTUM is dedicated to creating products which have a long service life and are free from substances that are harmful to the environment or health.
For more than 170 years, our corporate philosophy has embodied:
- The highest functional aesthetics
- A commitment to ergonomics
- The best materials
- Long-standing business relationships with manufacturers and suppliers
- Long-lasting products thanks to comprehensive services such as our
Sharpening service
Handle mounting service
Spare parts availability
- Weight 81 kg
- Motor voltage 400 V
- Mains Cable 2.8 m, CEE 400 V 16 A plug
- Filter Surface Area 5.62 m² (2 x 2.81 m²)
- Airflow max. 5280 m³/h
- Low Air Pressure 1668 Pa
- Hose Connection Ø 4 x 100 cm
- Motor power 2200 W
- Motor speed 2850 min⁻¹
- Diameter filter 51 cm
- Space required (L x W x H) 144 x 57 x 290 cm (height with filter cartridge: 180 cm)
- Volume dust bag 2 x 200 litres (400 litres)
- Dimensions dust bag Ø 51 cm x 127 cm
- Filter material Polyester
| Article no. | 725036 |
| Brand | DICTUM |
Accessories
Dust Hood, 410 x 325 mm
Rectangular plastic funnel with spigot to fit 100 mm extraction hoses. For collecting and extracting shavings on e.g. table saws, surface planers and wherever there are no specific extraction connectors.
€19.90
incl. VAT plus shipping costs
Article No. 720549
Hand Gate Valve, Ø 100 mm
A gate valve can be used to close hoses and pipes, e.g. to temporarily isolate unused machines from an extraction hose. This increases the low pressure or the suction capacity on the machines used.
€18.80
incl. VAT plus shipping costs
Article No. 720548
Extraction Hose, Ø 100 mm x 2 m
Flexible, steel wire reinforced hose with rubber cuffs at each end. Ideal for mobile extractors in the workshop. The rubber cuffs can suit extraction outlets of around 100 to 110 mm diameter quickly and easily.
€89.00
incl. VAT plus shipping costs
Article No. 720546
Extraction Funnel 250 x 100 mm, Ø 100 mm
Funnel-shaped extraction hood with intake size of 250 x 100 mm. Ideal for vacuuming, e.g. on the lathe or for floor cleaning. Depth 270 mm.
€17.90
incl. VAT plus shipping costs
Article No. 727646
Extraction Outlet Round, Ø 100 mm
Connection piece with flange for mounting on machine housings. For 100 mm extraction hoses. Flange diameter 143 mm, bolt circle diameter 128 mm, hole spacing 90 x 90 mm.
€7.50
incl. VAT plus shipping costs
Article No. 727650
Vacuum Tool Port Adapter, Rigid/Flexible, Ø 100 mm
The flexible part of the connector enables diameter tolerances of extraction pipes to be bridged. Suction hoses with Ø 105 mm (4 inches) are connected to the rigid end. The flexible end can be connected to pipes from Ø 95 mm to Ø 105 mm.
€16.90
incl. VAT plus shipping costs
Article No. 730822
Wire Spring Hose Clamps, Ø 100 mm, 2-piece Set
These spring-type hose clamps allow quick changing of suction hoses from one machine to another. Operable with one hand, the two levers can be pressed together to release the clamp. Ideal for small workshops when one suction hose is used...
€17.90
incl. VAT plus shipping costs
Article No. 730893
Hose Connector, Ø 100 mm
Connecting element for two hoses or pipelines or for connecting a hose or pipeline with an extraction nozzle of the same diameter.
€9.90
incl. VAT plus shipping costs
Article No. 730894
Hose reduction, Ø 100/57 mm
Connecting element for two hose or pipelines of different diameters, or for connecting a hose or pipeline with suction nozzles of different diameters.
€7.50
incl. VAT plus shipping costs
Article No. 730901
Branch Fitting, Ø 100 mm x Ø 63 mm
Branch fitting for connecting several machines to e.g. one main extraction hose.
€11.90
incl. VAT plus shipping costs
Article No. 730905
Fine Dust Filter Cartridge with Cleaning Mechanism, Ø 510 x...
Fine dust microfilter with a mesh or pore size of 1 micron (μm or micrometre). The numerous fins in the filter material increase the filter surface size compared to filter bags. Clogged filter pores lead to reduced extraction...
€329.00
incl. VAT plus shipping costs
Article No. 725037
Polyester Filter Bag, 5 Micron, Ø 510 x 1500 mm
Filter bag made of polyester fleece with a pore size of 5 microns (μm or micrometres). The filter pores filter out 99.9 % of all airborne particles ≥ 5 micron in size from the exhaust air. With hanging loop at the top end.
€75.00
incl. VAT plus shipping costs
Article No. 725042
Replacement Clamp Strap for Chip Bag, Ø 510 mm
Steel band with clamping lever and adjustable clamping width. For securely fixing the chip bags to e.g. separators of extraction systems.
€10.90
incl. VAT plus shipping costs
Article No. 725044
Chip Collection Bags, 10-Piece Set, Ø 510 x 1270 x 0.15 mm
Transparent polyethylene bags suitable for extraction systems.
€39.90
incl. VAT plus shipping costs
Article No. 725053