Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.

Standard Soundpost Setter, Violin, Viola

Nickel-plated, plastic grip.

€12.10

incl. VAT plus shipping costs

Article No. 700101

See details

Revolving Punch Pliers

For punching leather, cardboard, rubber, plastic etc. Six punches with diameters of 2 / 2.5 / 3 / 3.5 / 4 and 4.5 mm. The diameter is displayed in the view window. Pressed, anti-skid corded steel shanks with stop. 270 g.

€15.90

incl. VAT plus shipping costs

Article No. 711995

See details

Analogue Calliper

Bevelled scale in mm and inch for parallax-free reading. Deep-etched stainless steel, slide with 0.05 mm vernier and locking screw.

€28.80

incl. VAT plus shipping costs

Article No. 707303

See details

One-Handed Trenching Hoe

Lightweight hoe for careful work in densely grown beds. Double-layered blade. Pasania handle.

€22.90

incl. VAT plus shipping costs

Article No. 717905

See details

Arkansas Multiform Slipstones, 4-Piece Set

In a wooden case. Flat-pointed straight back, flat-pointed round back, knife-shaped, flat-skewed rounded back. Translucent Arkansas (extra-fine). 58 x 23 x 6 mm.

€43.70

incl. VAT plus shipping costs

Article No. 705260

See details

Turpentine Oil

One of the most valuable solvents on a natural basis, ideal for thinning vegetable oils, oil paints and varnishes as well as for making glazes and polishes with resins, waxes or pigments. This low-viscosity oil, obtained by...

€4.40

(Content: €44.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 705293

See details

Pumice Powder

Fine polishing powder for intermediate grinding, e.g. in French polishing or as a pore filler (is transparent with shellac). Pure silicate rocks. Applied with water or liquid paraffin.

€3.60

(Content: €14.40 / 1 kg)

incl. VAT plus shipping costs

Article No. 810050

See details

Pure Orange Oil

Low-viscosity orange oil from the peel of the sweet orange, ideal for thinning vegetable-based protective wood oils, and its grease dissolving properties make it a useful household cleaner. Mixing 1-5 % of it with a linseed or tung oil...

€13.90

(Content: €55.60 / 1 litre)

incl. VAT plus shipping costs

Article No. 705277

See details

Multi-Clip

Patented traction clamp for securing wooden parts for assembly or glueing, bundling cables, rods or wires, securing ladders, posts or pipes, etc. Two or more clamps can be combined to accommodate larger objects. Made of high-strength...

€3.90

incl. VAT plus shipping costs

Article No. 705870

See details

Scissor-Shaped Soundpost Setter, Violin, Viola

Made of brass.

€6.10

incl. VAT plus shipping costs

Article No. 700105

See details

Laurin Carbon Steel Blade

Made of carbon steel (80CrV2) for extreme sharpness, not rustproof. The blades, which are hardened to 58 HRC, still require polishing and sharpening. Rustic forging skin.

€10.10

incl. VAT plus shipping costs

Article No. 830920

See details

Bending Strap for Bending Iron

For pressing the ribs against the bending iron. Made of highly flexible, 0.3 mm thick stainless steel fitted with a wire handle on each end.

€27.90

incl. VAT plus shipping costs

Article No. 704325

See details

Automatic Punch Set with 26 Letters and Numbers

With this set you can easily mark wood and non-hardened metal. The knurled brass handle works with spring-load, you do not need a hammer. Simply insert a letter or number bit into the hexagon socket and press down. Letters are approx. 4...

€17.20

incl. VAT plus shipping costs

Article No. 708324

See details

Mother-of-Pearl, Squares, White

5 pieces.

€7.80

incl. VAT plus shipping costs

Article No. 830800

See details

Handiwork Metal 150

Fine saw for non-hardened metals and hard plastics. The rubber handle provides a comfortable and secure grip. Replaceable blade. Can also be used with blade for wood (No. 712716 ).

€18.50

incl. VAT plus shipping costs

Article No. 712715

See details

Rustic Blade, 3 Layers

The blade is well suited to make a knive as every day companion, a neck knife or a little hunter for the smaller tasks in the forest. Triple-layered blade with a cutting layer of White Paper Steel. The rough forged surface of the upper...

€19.90

incl. VAT plus shipping costs

Article No. 709292

See details

Mother-of-Pearl, Eyes, white

Circular pieces.

€3.30

incl. VAT plus shipping costs

Article No. 830813

See details

Shaker Pegs, Drawer Pull, Small

Simple, yet elegant, hand-turned Shaker-style knobs and coat hangers of pure design and perfect workmanship. Fine-grained boxwood, polished, with tapered tenons.

€1.90

incl. VAT plus shipping costs

Article No. 820092

See details

English Sliding Bevel, Walnut

Stock made of walnut with brass fittings. Angles are fixed through an adjustment screw, which is not in the way like a lever when marking or transferring angles. Blued and hardened steel blade.

€29.90

incl. VAT plus shipping costs

Article No. 707327

See details

Ryoba Restauro 125

This compact Japanese saw with two different tooth spacings and an ultra-thin blade is the first choice for the finest cuts in tight spaces and cutting off dowels or other projecting wooden parts flush with the surface. Beech handle.

€21.90

incl. VAT plus shipping costs

Article No. 712123

See details

Wild Olive »Mutenye«, 300 x 38 x 38 mm

Hard, dense heartwood with a lively grain for turning and carving, for knife handles or inlay work. The natural oil content makes it particularly resistant to water and soiling. The blanks on offer are relatively fresh and therefore have...

€18.60

incl. VAT plus shipping costs

Article No. 831166

See details

Chamfer Plane

With removable fence for 30°, 45° and 60° bevels. Carbon steel blade, approx. 62 HRC. Screw chipbreaker, Japanese white oak body.

€52.00

incl. VAT plus shipping costs

Article No. 717033

See details

Precision Scriber

Japanese precision scribers with very finely ground, extra-hard tips, for marking metal, glass, ceramics, and plastic. The extremely sharp points can also be used for customizing probes and other small objects.

€18.30

incl. VAT plus shipping costs

Article No. 717118

See details

Australian Precious Wood, Square Timber, Length 300 mm,...

Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.

€31.60

incl. VAT plus shipping costs

Article No. 831122

See details

Blade Blank Ajikiri, 3 Layers

For small chopping and rocker knives. Blue Paper Steel core, with black forging skin. Double bevel. Not rustproof. The blade must be polished and sharpened.

€39.90

incl. VAT plus shipping costs

Article No. 719539

See details

Marking Knife »Kogatana« Standard, Double Bevel, Blade Width 3 mm

Marking Knives »Kogatana« Standard, Double Bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.

€21.50

incl. VAT plus shipping costs

Article No. 710205

See details

Boxwood Assortment, 4.5 kg

Top-quality boxwood, air-dried for at least three years, free of cracks. A typical assortment contains several 19 x 19 to 38 x 38 mm squares, 150-300 mm in length, and one or two rounds Ø 50-65 mm.

€62.50 €49.00

(Content: €10.89 / 1 kg)

incl. VAT plus shipping costs

Article No. 520038

See details

Buffalo Horn Plate, Extra Long

Plates made from the extra long, black horns of the Indian water buffalo (Bubalus bubalis), a domesticated and not endangered species. The plates are well-suited for making jewellery, inlay, mouthpieces etc. Width approx. 35-40 mm.

€23.00

incl. VAT plus shipping costs

Article No. 831031

See details

Peening Anvil

Drop-forged steel anvil with a polished face for peening scythes and a horn for fastening on wooden blocks. The scythe blade is laid on the anvil, the cutting edge is peened with the hammer. For de-tailed instructions on peening scythes,...

€36.50

incl. VAT plus shipping costs

Article No. 705664

See details

Natural Whetstone for Scythes, Rozsutec

Natural stone from the Slovakian Mala-Fatra Mountains. Grit 300-400. High density and very small material removal, for drawing out the cutting edge For honing during cutting For scythe cuttings in soft grasses and herbs (wet grassland...

€14.90

incl. VAT plus shipping costs

Article No. 705582

See details

Japanese Planting Trowel

Lightweight compact professional hand spade with a thin, yet robust stainless steel blade.

€9.30

incl. VAT plus shipping costs

Article No. 717923

See details

Ebony, 1st Quality, 300 x 50 x 15 mm

Ebony, one of the hardest, densest woods in the world, is often used in turnery, cabinet making, restoration work and musical instrument making for parts which need to either be particularly beautiful or resistant to wear, e.g. keys,...

€14.80

incl. VAT plus shipping costs

Article No. 831021

See details

Miniature Damascus Blade, 30 Layers

This blade is ideal to create a pendant or carving knife. The core layer of White Paper Steel is sandwiched between 30 layers of Suminagashi steel. As all blades are handmade, they can vary slightly with regard to form and size. Hardness...

€17.90

incl. VAT plus shipping costs

Article No. 709290

See details

Blue Paper Steel from Japan

Alloyed Japanese carbon steel, martensitic, due to carbide formation somewhat tougher and more wear-resistant than White Paper Steel, coarser grain. With heat treatment instructions. (C = 1.1-1.2 %, Si = 0.1-0.2 %, Mn = 0.2-0.3 %, Cr =...

€54.90

incl. VAT plus shipping costs

Article No. 719621

See details

Shigefusa Hocho Kasumi, Nakiri - Usuba (vegetable knife)

Triple-layered blade, double-bevelled. Surface has a forged structure, gunmetal finish.

€329.00

incl. VAT plus shipping costs

Article No. 719206

See details

Back Saw for Hardwood 165

Small saw that cuts on the pull stroke for fine detail work in model-building, musical instrument making and restoration work. Unset saw blade with reinforced back.

€25.20

incl. VAT plus shipping costs

Article No. 712710

See details

Precision Knife Edge Ruler

The best way of checking if a surface is flat is with this straight edge, using the light-gap method. The rules are bevelled on the measurement edge and have a textured rubber grip. Stainless steel, accuracy grade 00 in accordance with...

€18.60

incl. VAT plus shipping costs

Article No. 707290

See details

Shaker Pegs, Drawer Pull, Large

Simple, yet elegant, hand-turned Shaker-style knobs and coat hangers of pure design and perfect workmanship. Fine-grained boxwood, polished, with tapered tenons.

€3.10

incl. VAT plus shipping costs

Article No. 820094

See details

Japanese Punch Awls

Hardened steel point with white oak handle. Also for marking.

€7.90

incl. VAT plus shipping costs

Article No. 717205

See details

Japanese Puzzle Box »Himitsu Bako«, 4-sun*

Himitsu Bako boxes are certainly among the most intriguing hand-crafted wooden objects made in Japan. At first glance, they appear to be nothing more than simple boxes with intricately inlaid surfaces. Try to open them and you will...

€59.00

incl. VAT plus shipping costs

Article No. 820035

See details

Australian Precious Wood, Grain Wood Offcuts, 5 kg

A random assortment of beautifully grained, colourful Australian hardwood pieces such as jarrah, goldfield, sheoak, mulga etc. in irregular sizes, some of which have attached bark, slight defects or cracks. Suitable for small carvings,...

€36.00

(Content: €7.20 / 1 kg)

incl. VAT plus shipping costs

Article No. 831132

See details

Japanese Garden Knife

Powerful foldable garden knife with a curved carbon steel (58 HRC) grafting blade and a large handle made of untreated precious wood. Double bevel. With practical hanging eyelet.

€19.90

incl. VAT plus shipping costs

Article No. 709169

See details

Japanese Vanadium Round Bar

Ideal for making mortise chisels, other tools for woodworking or even integral knives. Tougher, extremely break-proof vanadium steel (C=0.65-0.75%, Si=0.15-0.30%, Mn=0.6-0.9%, P=≤0.03%, S=≤ 0.03%, Cr=≤ 0.15%, V=0.10-0.20%). With heat...

€29.90

incl. VAT plus shipping costs

Article No. 719625

See details

Wild Olive »Mutenye«, 150 x 38 x 38 mm

€9.20

incl. VAT plus shipping costs

Article No. 831165

See details

File and Rasp, 2-piece Set

Practical set for work in the field and in the workshop, consisting of the two standard tools metal file and rasp. Comes with mounted octagonal handle made of naturally treated ash wood (No. 701627 ). In cotton pouch. Set contains:...

€57.90

incl. VAT plus shipping costs

Article No. 705090

See details

Ostrich Sinews, 5-Piece Set

Ideal for laminated backings on wooden or composite bows. The lamination increases draw strength and prevents breakage of the bow. Almost unlimited durability when stored under dry conditions. These sinews are dried gently and so keep...

€21.50

incl. VAT plus shipping costs

Article No. 831247

See details