Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Inspection Mirror, 225 mm

Inspection Mirror

For inspecting hollow bodies and areas that are hard-to-reach.
€17.30

incl. VAT plus shipping costs

Article No. 707111

Hard Material Saw Select 250

Hard Material Saw Select 250

Specially designed saw for cutting brass, copper, aluminium, hard plastics, and plated materials (plasterboard). Fine triangular teeth that cut on the pull stroke Blade coated to reduce friction Robust ergonomic aluminium handle with...
€22.50

incl. VAT plus shipping costs

Article No. 712610

Nakagoshi Hocho, Gyuto (Fish and Meat Knife), 115 mm

Nakagoshi Hocho, Gyuto (fish and meat knife)

These traditional Japanese kitchen knives are handmade by Satoshi Nakagoshi and his son in their small workshop on the island Shikoku. The water-resistant magnolia wood handles fit securely in the hand. Cutting edge made of White Paper...
series
 
€119.00

incl. VAT plus shipping costs

Article No. 719483

Chinese Long-handled Gouge, Sweep 4 / 30 mm

Chinese Long-handled Gouges

Ideal for hollowing out drums, deep vessels and large sculptures. The blades are bevelled on the inside and slightly angled, allowing more free play for the oak handles. Made of carbon steel.
variants
 
€44.40

incl. VAT plus shipping costs

Article No. 701001

Carving Knife, Form E

Carving Knife

Exclusive carving knives with ergonomic cambered handles made of untreated Japanese white oak for perfect cutting control. Rustproof A2 steel (approx. 62 HRC).
variants
 
€22.90

incl. VAT plus shipping costs

Article No. 710759

€6.20

incl. VAT plus shipping costs

Article No. 706259

Blade Compact, 3 Layers, Petty

Blade Compact, 3 Layers, Petty

Rustproof triple-layered blade, double bevel. The VG-1 cutting edge layer is surrounded by two layers of stainless steel. Pre-sharpened and polished ready-to-use.
variants
€16.50

incl. VAT plus shipping costs

Article No. 719656

Cylindrical Tenon Cutter, 5-Piece Set

Cylindrical Tenon Cutter, 5-Piece Set

For cutting cylindrical tenons for mortise jointing as well as for making wooden dowels up to 70 mm in length. Five pieces in a wooden case, carbon steel. Shaft diameter 13 mm. Tenon diameters 10 / 12 / 16 / 20 / 25 mm
€104.50 €88.80

incl. VAT plus shipping costs

Article No. 701870

Japanese Chip Carving Knife, Curved Double Edge, Shape C

Japanese Chip Carving Knife, Curved Double Edge, Shape C

Multi-layered blades, very sharp and wear-resistant. Cutting layer made of Blue Paper Steel, handles made of ash wood. Shapes A and B feature a single bevel, C and D a double bevel.
 
€38.40

incl. VAT plus shipping costs

Article No. 710717

Wild Olive »Mutenye«, 300 x 38 x 38 mm

Wild Olive »Mutenye«, 300 x 38 x 38 mm

Hard, dense heartwood with a lively grain for turning and carving, for knife handles or inlay work. The natural oil content makes it particularly resistant to water and soiling. The blanks on offer are relatively fresh and therefore have...
variants
€18.60

incl. VAT plus shipping costs

Article No. 831166

Migakiko Polishing Powder

Migakiko Polishing Powder

Fine mineral powder for the final polishing of Roiro Urushi lacquers. The powder is used together with oil (e.g. camellia oil) for polishing the dried Kijo-mi Urushi impregnation.
€99.90

(Content: €555.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 716366

Farming Sickle

Farming Sickle

Sickle with thick blade. Cuts branches, undergrowth and brush. 4 mm thick triple-layered steel blade.
€43.90

incl. VAT plus shipping costs

Article No. 718152

Nata Jigata

Nata Jigata

Cleaver made of high-carbon steel for gardening and forestry. The blade has a single right bevel, allowing cuts to be made flush to the trunk. Comes with a sheath and belt loop.
 
€84.90

incl. VAT plus shipping costs

Article No. 710804

Tea Box Deluxe, Cherry Bark

Tea Box Deluxe

The tea box made from high-contrast wood types is both functional and makes an aesthetically pleasing design object. Wood types from top to bottom: Cherry bark, American walnut, cherry wood and maple. The top layer of the laminated cover...
€109.00

incl. VAT plus shipping costs

Article No. 820312

Chamfer Plane

Chamfer Plane

With removable fence for 30°, 45° and 60° bevels. Carbon steel blade, approx. 62 HRC. Screw chipbreaker, Japanese white oak body.
 
€52.00

incl. VAT plus shipping costs

Article No. 717033

Australian Precious Wood, Square Timber, Length 300 mm, Figured Jarrah

Australian Precious Wood, Square Timber, Length 300 mm,...

Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.
variants
€31.60

incl. VAT plus shipping costs

Article No. 831122

Australian Precious Wood, Square Timber, Length 120 mm, Figured Jarrah

Australian Precious Wood, Square Timber, Length 120 mm,...

Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.
variants
€12.90

incl. VAT plus shipping costs

Article No. 831332

Super Speed Pruning Saw

Super Speed Pruning Saw

The curved, taper-ground blade ensures extremely high-performance cutting and is capable of dealing even with thick branches. Ergonomic, unvarnished beech handle. Comes without sheath.
€30.90

incl. VAT plus shipping costs

Article No. 712173

Pink Ivory, 150 x 38 x 38 mm

Pink Ivory, 150 x 38 x 38 mm

Pink Ivory (Berchemia zeyheri) is one of the most magnificent coloured woods, with a spectrum ranging from bright pink to fiery red. Extremely dense with the finest pore structure, it takes on a fine polish and is ideal for creating...
variants
€16.40

incl. VAT plus shipping costs

Article No. 831144

Superior Shellac, 250 g

Superior Shellac

Reddish shellac for polishing with marked toning and for accentuating the grain.
variants
€17.90

(Content: €71.60 / 1 litre)

incl. VAT plus shipping costs

Article No. 810037

Hocho Deluxe, Sashimi (Fish Knife)

Hocho Deluxe, Sashimi - Yanagiba (fish knife)

The forging of knives has always had a strongly mystical cultural history. This is the only explanation why the products are often enhanced way beyond their actual utility. The passionate search for perfection, characterised by the...
series
 
€929.00

incl. VAT plus shipping costs

Article No. 719715

Japanese Professional Glass Cutter

Japanese Professional Glass Cutter

Finely ground, sintered tungsten carbide cutter with unsurpassed service life means effortless glass cutting. Permanent lubrication thanks to the petroleum reservoir in the handle (lubricant not included). Maximum glass thickness 8 mm.
€33.90

incl. VAT plus shipping costs

Article No. 716155

Veneer and Marking Knife »Yokote Kogatana«, with Handle and Sheath

Veneer and Marking Knife »Yokote Kogatana«, with Handle and...

Double-layered steel blade with hammered surface. Right bevel. Magnolia handle.
 
€58.50 €49.70

incl. VAT plus shipping costs

Article No. 710708

Japanese Chip Carving Knife »Stecher«, Shape A

Japanese Chip Carving Knife »Stecher«, Shape A

Multi-layered blades, very sharp and wear-resistant. Cutting layer made of Blue Paper Steel, handles made of ash wood. Shapes A and B feature a single bevel, C and D a double bevel.
 
€38.40

incl. VAT plus shipping costs

Article No. 710715

Japanese Carpenter's Hammer

Japanese Carpenter's Hammer

This is the perfect tool for bounce-free driving, hammering in and removing nails. The conical head stays true, does not bounce and the sharp nail claw is exceptionally efficient at removing nails. The faces and cheeks are designed to...
€28.50

incl. VAT plus shipping costs

Article No. 714124

Masonry Drill Bits TX, 7-Piece Set

Masonry Drill Bits TX, 7-Piece Set

Comes in metal case, Ø 4 / 5 / 2 x 6 / 8 / 10 / 12 mm Overall length 75-150 mm
€28.60

incl. VAT plus shipping costs

Article No. 717545

Traditional Japanese Splitting Axe

Traditional Japanese Splitting Axe

Splitting axe with incredible power thanks to its elongated, highly convex head and long handle made of fine-grained Japanese white oak. The high-carbon steel edge (58-60 HRC) of the triple-layered head will remain sharp even when...
   
€149.00

incl. VAT plus shipping costs

Article No. 710819

Ethanol (Alcohol) 96 %, 1 l

Ethanol (Alcohol) 96 %, 1 l

This pure alcohol is ideal for dissolving and diluting shellac and other resins, as well as for cleaning brushes. It is denatured and therefore not suitable for human consumption. Thanks to the special denaturing agent used, our alcohol...
€10.20

incl. VAT plus shipping costs

Article No. 810039

Dovetail Gauge

Dovetail Gauge

For marking straight and angled dovetail joints, 1:8 ratio. Adjustable width (6-40 mm) and angle, stainless steel. Blade and guide length 150 mm.
€24.90

incl. VAT plus shipping costs

Article No. 707179

Back Saw Powergrip 150

Back Saw Powergrip 150

Small Japanese saw with interchangeable blade for all fine wood cuts in model work and hobby work. The rubberised handle fits the hand comfortably. For cuts across the grain.
€19.90

incl. VAT plus shipping costs

Article No. 712714

Heavy Duty I-Beam Bar Clamp

Heavy Duty I-Beam Bar Clamp

Sometimes you need a pressure reserve, e.g. when glueing door frames, staircases or thick panels. With its rigid I-profile, powerful trapezoid thread and robust hand crank, this door clamp is a match for the most difficult challenges....
€139.00

incl. VAT plus shipping costs

Article No. 705827

Stair Spider

Stair Spider

Six »legs« (calliper gauges) of hardened spring band steel easily transfer even the most complex stair shape for making templates or directly to the raw material for the next step. Locked with a wing nut. Comes in a wooden box. Callipers...
€57.90

incl. VAT plus shipping costs

Article No. 707318

Paper Cutter

Paper Cutter

For cutting paper, cardboard, foil and thin fabrics. Rotating blade, ergonomic aluminium handle. Blade Ø 45 mm (thickness 0.3 mm). Overall length 150 mm.
€15.90

incl. VAT plus shipping costs

Article No. 710536

Kamo Hocho, Nakiri - Usuba (Vegetable Knife)

Kamo Hocho, Nakiri - Usuba (vegetable knife)

The VG-10 steel core is covered by a total of 16 layers of steel, thus creating an interesting Suminagashi pattern. The round sandalwood handle has an interesting red-brown colour and is completed with a black wood laminate ferrule. The...
series
 
€254.00

incl. VAT plus shipping costs

Article No. 719674

Screw-Removing Pliers, Size 2

Screw-Removing Pliers

Specially designed Japanese pliers for unscrewing tight screws with a damaged head or slot. The sharp-toothed grooves at the ends of the inner jaws allow you to grip and twist round-head and cylinder-head screws close to the flange. Also...
variants
€23.90

incl. VAT plus shipping costs

Article No. 717847

Shigefusa Hocho Kasumi, Santoku (All-purpose Knife)

Shigefusa Hocho Kasumi, Santoku (all-purpose knife)

Triple-layered blade, double-bevelled. Surface has a forged structure, gunmetal finish.
series
 
€329.00

incl. VAT plus shipping costs

Article No. 719665

Svante Djärv Drawknife, Straight Blade

Svante Djärv Drawknife, Straight Blade

Light drawknife for delicate work. Hand-forged from carbon steel with fine-grained steel structure for a long edge life and easy sharpening Handy, ribbed hickory handles for a good grip Handles attached via inserted, glued tangs
 
€99.00

incl. VAT plus shipping costs

Article No. 701569

Rawhide Hammer

Rawhide Hammer

This rawhide hammer is a specialised tool for the purpose of splitting wooden shingles together with a splitting knife. The head of the hammer is made of water buffalo skin, which is rolled and compressed thrice. Then the hammer head has...
€119.00

incl. VAT plus shipping costs

Article No. 705681

Groover

Groover

For sinking seams or gouging decorative grooves. The blade is set off-centre and therefore ideal for cutting accurate parallels along leather edges. The replaceable blade is fully and easily adjustable. The distance between stop and...
€19.90

incl. VAT plus shipping costs

Article No. 708421

DICTUM Frame Saw Classic 400, Universal

DICTUM Frame Saw Classic 400, Universal

With Turbo-Cut universal blade.
€78.40

incl. VAT plus shipping costs

Article No. 712968

Japanese Rubber Boots, Size 41-42

Japanese Rubber Boots

Japanese boots with separate big toe provide a better footing, improve the wearer’s sense of balance and circulation. Insiders have long considered these traditional boots to contribute significantly to the extraordinary long lifespan of...
€49.90

incl. VAT plus shipping costs

Article No. 707664

Blade Blank Ajikiri, 3 Layers

Blade Blank Ajikiri, 3 Layers

For small chopping and rocker knives. Blue Paper Steel core, with black forging skin. Double bevel. Not rustproof. The blade must be polished and sharpened.
€39.90

incl. VAT plus shipping costs

Article No. 719539

Wild Olive »Mutenye«, 380 x 38 x 38 mm

Wild Olive »Mutenye«, 380 x 38 x 38 mm

Hard, dense heartwood with a lively grain for turning and carving, for knife handles or inlay work. The natural oil content makes it particularly resistant to water and soiling. The blanks on offer are relatively fresh and therefore have...
variants
€28.30

incl. VAT plus shipping costs

Article No. 831264

bm1 Birch Bark Blank, Ø 31 mm

bm1 Birch Bark Blank, Ø 31 mm

Highly versatile - for making handles (knives, fishing rods, door handles, shaving brushes), turnery work, artwork, jewellery, etc. bm1 is not only pleasing to the eye with its interesting texture but also has a smooth, warm feel. But it...
variants
€24.90

incl. VAT plus shipping costs

Article No. 760108

Knife Pendant with Leather Sheath

Knife Pendant with Leather Sheath

This beautiful knife made of carbon steel (61 HRC) is completely handcrafted. Its ancient design makes it very attractive and it is also fully functional. The dark scaled surface of the metal provides a nice contrast to the light brown...
 
€43.90

incl. VAT plus shipping costs

Article No. 719707

€7.60

incl. VAT plus shipping costs

Article No. 706279