TC Double Rail & Stile Bit (3 parts), Shank Ø 8 mm, Roman profil

The 3-part bit set eliminate the tedious changing of profile cutters on the arbour, so all you...
The 3-part bit set eliminate the tedious changing of profile cutters on the arbour, so all you need to do is adjust the height. Classic Roman profile.
Suitable addition: the panel-raising ogee cutter (No. 717778). With the bearing you always guide the bit parallel to the workpiece, even with curved edges. For use on a router table.
Usage: First cut the end tenons on the transverse parts of the frame and rails with the stile cutter. Then adjust the router so that the middle slotting cutter is at exactly the same height as the end tenon, then cut all the inside edges with ogee profile and groove. Suitable for material with 18 to 22 mm thickness.
Safety first
  • All bits comply with the EU safety standards EN 847-1 and EN 847-2
  • Suitable for hand feed
  • Main specifications laser-engraved on shank
Tungsten Carbide (TC) tipped Router Bits
  • Tungsten carbide is an extremely tough cutting material with high wear resistance
  • Finest micro-grain quality for an extra-long edge life
  • Where technically possible, the cutting edges are fitted at an angle to the shank
  • Exactly ground shanks ensure precise rotation
  • Secure fit in the collet (eccentricity indicated on shank)
  • Perfect guidance along workpieces thanks to quality ball bearings
  • All ball bearings can be replaced and are available as spare parts
     
    more
    less
    • Bearing Ø 22 mm
    • Shape Roman R 4.76 mm
    • Cutting length 23.8 mm
    • Cutting Ø 41 mm
    • Shaft diameter 8 mm
     
     
    Article no. 717779
    Brand Sonstige
    Ready to ship today, delivery time 2-3 workdays within Germany
    €139.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Many other models
    Article
    Bearing Ø
    Shape
    Cutting length
    Cutting Ø
    Shaft diameter
    Price
    Quantity

    Article no.: 717779

    Bearing Ø: 22 mm
    Shape: Roman R 4.76 mm
    Cutting length: 23.8 mm
    Cutting Ø: 41 mm
    Shaft diameter: 8 mm
    Price: €139.00
    Quantity:
     

    Article no.: 717780

    Bearing Ø: 22 mm
    Shape: Roman R 4.76 mm
    Cutting length: 23.8 mm
    Cutting Ø: 41 mm
    Shaft diameter: 12 mm
    Price: €139.00
    Quantity:
     

    DICTUM T-Track, 1220 mm

    €19.90

    incl. VAT plus shipping costs

    Article No. 707766

    DICTUM T-Track, 610 mm

    €12.90

    incl. VAT plus shipping costs

    Article No. 707764

    DICTUM T-Track, 915 mm

    €16.50

    incl. VAT plus shipping costs

    Article No. 707765