HW Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm, Ø 12 mm, NL 50 mm
Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For deep cuts, we advise making two passes. The extra-long spiral bit is ideal for deep mortises and grooves in wood joints, and is particularly suitable for use in the PantoRouter or in the WoodRat.
- Cutting length 50 mm
- Cutting Ø 12 mm
- Total length 90 mm
- Shaft diameter 8 mm
| Article no. | 720762 |
| Brand | - |
Suitable for
PantoRouter for Milling Motors Ø 43 mm
The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
€1,789.00
incl. VAT plus shipping costs
Article No. 720757
PantoRouter incl. MAFELL Milling Motor FM 1000
The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
€1,739.00
incl. VAT plus shipping costs
Article No. 720755
Featherboard for PantoRouter, 12 mm Comb Joints
The milling featherboard is mounted on the template holder of the PantoRouter. The template can be scanned with a Ø 10 mm copying pin. Made of 4.45 mm galvanised steel. Length 400 mm. Incl. mounting screws. Suitable for PantoRouter.
€46.80
incl. VAT plus shipping costs
Article No. 720567
PantoRouter for Milling Motors Ø 91.8 mm
The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
€1,789.00
incl. VAT plus shipping costs
Article No. 720557
PantoRouter Starter Set incl. MAFELL Milling Motor FM 1000
The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
€2,332.00
incl. VAT plus shipping costs
Article No. 721170