Tormek T-8 Black

Free workshop voucher included!

The Tormek T-8 Black is a limited-edition, 50-year anniversary machine with an intense, all-black...
The Tormek T-8 Black is a limited-edition, 50-year anniversary machine with an intense, all-black visual appearance that spices up any workshop. This machine is kitted to get tools extremely sharp with high efficiency and precision. The 600 grit DF-250 Diamond Wheel Fine sharpens any kind of steel and even ceramic with ease. The CW-220 Composite Honing Wheel with integrated polish quickly gets rid of the most stubborn burr. ACC-150 Anti Corrosion Concentrate keeps the diamond grinding wheel from rusting and coats your newly sharpened edges, keeping them in top trim even longer.
Housing:
  • Precision-cast zinc stand, powder-coated
  • Sides made of impact-resistant ABS plastic
Grinding wheel:
  • DF-250 Diamond Wheel Fine, ø 250 × 50 mm
  • Steel, diamond coating
Honing wheel:
  • CW-220 Composite Honing Wheel, ø 220 mm × 34 mm
  • Galvanized steel, ABS plastic, composite
Drive system:
  • Unique drive system with RKX18 rubber
  • Self-adjusting for load
Main shaft:
  • MSK-250 Stainless Steel Shaft with EzyLock
Performance:
  • 100 rpm, Torque 14.7 Nm
Motor:
  • Maintenance-free Industrial motor, 200 W, 230 V / 50 Hz
  • Quiet running, 54 dB
  • 25 000 hours of operating time
Warranty:
  • 50-year warranty, 5 years + 45 years when you register at tormek.com.
  • Special warranty for this special machine.
Extras:
  • Special Durable Storage Tray
  • Special Black Anniversary Machine Cover with Anniversary Badge
  • SQ-90 Tormek Square
  • Cast Zink Anniversary Badge
Celebrating 50 Years of sharpening
This year marks 50 years since Torgny Jansson founded Tormek. That calls for a celebration! And what better way to celebrate than with a limited edition anniversary machine? Meet the Tormek T-8 Black. With a 50-year warranty.
The Tormek T-8 Black is produced in a limit¬ed edition. It is equipped with a diamond grinding wheel and a composite honing wheel for maximum performance. The all-black appearance, contrasted with the glittering diamonds of the diamond grinding wheel, gives a real edge to any workshop, sharpening service or home.
Tormek sharpening system
Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.
The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.

    Scope of delivery

    • DF-250 Diamond Wheel Fine
    • ACC-150 Anti-Corrosion Concentrate
    • CW-220 Composite Honing Wheel for deburring and polishing
    • US-105 Universal Support for precision sharpening
    • WM-200 AngleMaster to measure the sharpening angle
    • EM-15 Edge Marker for coloring the bevel when setting the sharpening angle
    • HB-10 Tormek Handbook
     
    more
    less
    Further details on the manufacturer
    • Disk diameter 250 mm
    • No load speed 100 1/min
    • Weight 15.5 kg
    • Dimensions 270 x 270 x 330 mm
     
    Exklusively at DICTUM: If you buy a Tormek T-8 or T-4 from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of 100 € for a multi-day workshop. The voucher amount cannot be set off against the purchase of products.
     
    Article no. 716044
    Brand Tormek
    €865.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    Tormek T-8 Black
    Tormek T-8 Black

    Article number 716044
      €865.00
     
    Plenty of accessories and spare parts

    Accessories

    Tormek Square Edge Jig SE-77

    Tormek Square Edge Jig SE-77

    For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).
    €69.90

    incl. VAT plus shipping costs

    Article No. 716035

    Tormek Diamond Grinding Wheel DE-250, Grit 1200

    Tormek Diamond Grinding Wheel DE-250, Grit 1200

    Diamond grinding wheel for a very fine finish. Ideal for carving gouges and knives. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding wheels for wet grinding only as this...
    €284.00

    incl. VAT plus shipping costs

    Article No. 716078

    Tormek Diamond Grinding Wheel DC-250, Grit 360

    Tormek Diamond Grinding Wheel DC-250, Grit 360

    Diamond grinding wheel for quick and effective material removal, ideal for pre-grinding dull blades or repairing blades with nicks. Incl. Tormek ACC-150 anti-corrosion concentrate (150 ml, No. 716077 ). It is advisable to use diamond...
    €294.00

    incl. VAT plus shipping costs

    Article No. 716080

    Tormek Axe Jig SVA-170

    Tormek Axe Jig SVA-170

    For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).
    €16.40

    incl. VAT plus shipping costs

    Article No. 705228

    DICTUM »Carbon Cut« Grinding Wheel, Grit 80

    DICTUM »Carbon Cut« Grinding Wheel, Grit 80

    Extra-coarse wheel with hard bond for repairing damaged tool blades. Primarily suitable for double-layered blades and carbon steel. Aluminium oxide abrasive.
     
    €129.00

    incl. VAT plus shipping costs

    Article No. 716030

    DICTUM »Ultra-Speed« Grinding Wheel, Grit 3000

    DICTUM »Ultra-Speed« Grinding Wheels

    For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
    variants
     
    €249.00

    incl. VAT plus shipping costs

    Article No. 727850

    DICTUM »Black Carbide« Grinding Wheel, Grit 220

    DICTUM »Black Carbide« Grinding Wheel, Grit 220

    Black silicon carbide is particularly suitable for hard materials such as HSS but also for carbon steels. Especially woodturners appreciate the fast stock removal and the long lifetime of the abrasive. Black silicon carbide abrasive.
     
    €169.00

    incl. VAT plus shipping costs

    Article No. 727848

    DICTUM »Ultra-Speed« Grinding Wheel, Grit 1000

    DICTUM »Ultra-Speed« Grinding Wheels

    For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
    variants
     
    €199.00

    incl. VAT plus shipping costs

    Article No. 727849

    DICTUM »Ultra-Speed« Grinding Wheel, Grit 220

    DICTUM »Ultra-Speed« Grinding Wheels

    For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
    variants
     
    €164.00 €139.00

    incl. VAT plus shipping costs

    Article No. 727847

    Tormek Tool Rest SVD-110

    Tormek Tool Rest SVD-110

    For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.
    €34.10

    incl. VAT plus shipping costs

    Article No. 705218

    Tormek Rubber Work Mat RM-533

    Tormek Rubber Work Mat RM-533

    This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...
    €50.50

    incl. VAT plus shipping costs

    Article No. 705198

    Tormek Hand Tool Kit HTK-806

    Tormek Hand Tool Kit HTK-806

    Includes: Short Tool Jig (SVS-38) Axe Jig (SVA-170) Knife Jig (KJ-45) Small Knife Holder (SVM-00) Knife Jig (KJ-140) Scissors Jig (SVX-150) Comes in practical plastic box with hard foam inlay (HTK-00).
    €203.00

    incl. VAT plus shipping costs

    Article No. 705223

    Tormek Multi Base MB-102

    Tormek Multi Base MB-102

    Base for sharpening on the side of diamond wheels No. 716078 , 716079 and 716080 for completely flat cutting-tool edges without hollow grind. The multi-holder is fully adjustable and allows optimal setting for each tool and each...
    €79.00

    incl. VAT plus shipping costs

    Article No. 716081

    Tormek Moulding Knife Jig SVP-80

    Tormek Moulding Knife Jig SVP-80

    Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models. For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for...
    €172.30

    incl. VAT plus shipping costs

    Article No. 705238

    Tormek Woodturner's Kit TNT-808

    Tormek Woodturner's Kit TNT-808

    Includes: Gouge Jig (SVD-186 R) Multi Jig (SVS-50) Tool Rest (SVD-110) Profiled Leather Honing Wheel (LA-120) Turning Tool Setter (TTS-100) Dust Cover for Tormek Sharpening System (MH-380) Instruction box for woodturners (in...
    €319.00

    incl. VAT plus shipping costs

    Article No. 705454

    Tormek Stone Grader SP-650

    Tormek Stone Grader SP-650

    For regrading and dressing Tormek sharpening stones.
    €27.50

    incl. VAT plus shipping costs

    Article No. 705209

    Tormek Small Knife Holder SVM-00

    Tormek Small Knife Holder SVM-00

    Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.
    €35.00

    incl. VAT plus shipping costs

    Article No. 705232

    Tormek Short Tool Jig SVS-38

    Tormek Short Tool Jig SVS-38

    For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
    €23.80

    incl. VAT plus shipping costs

    Article No. 705239

    Tormek Profiled Leather Honing Wheel LA-120

    Tormek Profiled Leather Honing Wheel LA-120

    For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.
    €55.10

    incl. VAT plus shipping costs

    Article No. 705227

    variants
    €43.80

    incl. VAT plus shipping costs

    Article No. 705203

    Tormek Sharpening Station (TS-740)

    Tormek Sharpening Station (TS-740)

    This robust sharpening station offers not just a sharpening table but also storage space for the Tormek sharpening jigs and accessories. You can adjust the working height to fit your exact size. This allows full control over sharpening,...
    €779.00

    incl. VAT plus shipping costs

    Article No. 705233

    Tormek Turning Tool Setter TTS-100

    Tormek Turning Tool Setter TTS-100

    For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
    €27.40

    incl. VAT plus shipping costs

    Article No. 705237