Replacement Jaw for Positioning Square Right Angle Clamp
These clamping jaws can be used to clamp various 90° angles to workpiece corners for assembly or glueing. This facilitates exact 90° assembly. Clamping jaw made of aluminium. Fits
| Article no. | 714515 |
| Brand | - |
Suitable for
Positioning Square Right Angle Clamp incl. Jaws, 120 mm
Precise 90° square with 120 mm leg length and holes for positioning clamping jaws. Used as an assembly or glueing aid, the square is clamped to the workpiece corner (inside or outside) to facilitate accurate 90° assembly. The recess on...
€36.00
incl. VAT plus shipping costs
Article No. 714514
Hattori Mitre Stop, 65 mm
Precision-milled square with mm-scale, made of solid aluminium. The 15 mm material thickness allows the square to stand securely on its narrow leg, which is an advantage when setting the depth on e.g. circular saws and routing tables....
€14.90
incl. VAT plus shipping costs
Article No. 714513
Hattori Multi-purpose Positioning Squares 90/45, 2-Piece Set
Horizontally or vertically, for screwing, plugging or clamping. Versatile, practical and precise, the 90° squares can be used for positioning or assembling workpieces, and for setting up fences and auxiliary devices. Screws: Screwed...
€69.00
incl. VAT plus shipping costs
Article No. 729529
Hattori Aluminium Mini Try Square
Precision-milled from 10 mm thick aluminium, this small square offers many applications, not only for checking 90° angles. The recess on the inside corner ensures full contact when applied to outer surfaces. The 10 mm material thickness...
€11.90
incl. VAT plus shipping costs
Article No. 714518
Hattori Mitre Stop, 140 mm
Precision-milled square with mm-scale, made of solid aluminium. The 15 mm material thickness allows the square to stand securely on its narrow leg, which is an advantage when setting the depth on e.g. circular saws and routing tables....
€29.90
incl. VAT plus shipping costs
Article No. 714641
Hattori Step Block, 50 x 100 mm
The graduations milled at 10 mm intervals offer precise adjustment possibilities when clamping or setting workpieces for machining. End support for hold-down clamps: The clamping height of many T-slot hold-downs is limited by the...
€15.90
incl. VAT plus shipping costs
Article No. 714710