Woodworking / Metalworking

4 of 74
Bad Axe Panel Saw D8, X-Cut, Handle Size L

Bad Axe Panel Saw D8, X-Cut

Bad Axe panel saws The hand-sharpened saw blade, made of Swedish spring steel, has a hollow-ground edge to minimise friction and increase rigidity. The hickory handles (different sizes available according to hand size) are secured with...
€449.00 €429.00

incl. VAT plus shipping costs

Article No. 712354

Turbo-Cut Panel Saw 450

Turbo-Cut Panel Saw 450

This classic European hand saw with high-performance Japanese saw blade allows precise cutting at breathtaking speed. The teeth are designed to cut primarily on the »push stroke«, but are also specially ground to cut on the »pull stroke«...
€69.60

incl. VAT plus shipping costs

Article No. 712091

Turbo-Cut Panel Saw 330

Turbo-Cut Panel Saw 330

This classic European hand saw with high-performance Japanese blade allows precise cutting at high speed. The teeth are designed to cut primarily on the »push stroke«, but are also specially ground to cut on the »pull stroke« as well...
€64.60

incl. VAT plus shipping costs

Article No. 712090

DICTUM Akagashi Flush-cutting Saw 170

DICTUM Akagashi Flush-cutting Saw 170

The unset teeth leave no scratches on the surface of the workpiece and are thus ideal for cutting off dowels flush to the surface. Handmade ergonomic handle of oiled Japanese red oak
 
€52.10

incl. VAT plus shipping costs

Article No. 712166

Flush-Cutting Saw Kugihiki 190

Flush-Cutting Saw Kugihiki 190

Professional Kugihiki with extremely thin and flexible blade. Traditional design with wooden handle wrapped in rattan.
€74.40

incl. VAT plus shipping costs

Article No. 712303

Flush Cutting Saw Mini Kugihiki 150

Flush Cutting Saw Mini Kugihiki 150

Simple flush cutting saw with hardwood handle.
€14.80

incl. VAT plus shipping costs

Article No. 712304

Z-Saw Mini Kugihiki

Z-Saw Mini Kugihiki

Small flush cutting saw for flush cuts without damaging surfaces. Replaceable blade, hard-chromed. Lightweight plastic handle. Double cutting edge.
€13.90

incl. VAT plus shipping costs

Article No. 712321

German Veneer Saw 75

German Veneer Saw 75

Veneer saw made in Germany with cranked handle and double-edged saw blade. Triangular teeth for push and pull strokes.
€22.90

incl. VAT plus shipping costs

Article No. 703810

Lie-Nielsen Dovetail Saw, Blade Thickness 0.5 mm

Lie-Nielsen Dovetail Saws

Precise, efficient back saws that produce clean cuts. Triangular teeth that cut on the push stroke, especially for dovetail joints. The minimum setting makes it easier to saw a straight line.
variants
€234.00

incl. VAT plus shipping costs

Article No. 712025

Lie-Nielsen Carcass Saw

Lie-Nielsen Carcass Saws

Ideal saw for cutting tenon shoulders. Medium-fine teeth that cut on the push stroke for fast but precise cuts across the grain.
variants
€234.00

incl. VAT plus shipping costs

Article No. 712027

Lie-Nielsen Tenon Saw

Lie-Nielsen Tenon Saws

This backsaw with a large saw blade is perfect for deep cuts in the direction of the grain, such as cutting mortise and tenon joints. The well-balanced saw cuts efficiently on the push stroke and without jamming up to a depth of 9 cm.
variants
€334.00

incl. VAT plus shipping costs

Article No. 712026

Bad Axe »Stiletto« Dovetail Saw, Rip Cut, Regular Handle Size

Bad Axe »Stiletto« Dovetail Saw, Rip Cut

Bad Axe back saws The hand-sharpened saw blade, made of Swedish spring steel, is attached to a gunmetal-finished steel back that allows it to be tightened or, when necessary, completely replaced. The hickory handles (different sizes...
variants
€288.00

incl. VAT plus shipping costs

Article No. 712340

Bad Axe »Stiletto« Dovetail Saw, Hybrid-Cut, Regular Handle Size

Bad Axe »Stiletto« Dovetail Saw, Hybrid-Cut

Bad Axe back saws The hand-sharpened saw blade, made of Swedish spring steel, is attached to a gunmetal-finished steel back that allows it to be tightened or, when necessary, completely replaced. The hickory handles (different sizes...
variants
€288.00

incl. VAT plus shipping costs

Article No. 712342

Bad Axe Carcass Saw, Hybrid-Cut, Regular Handle Size

Bad Axe Carcass Saw, Hybrid-Cut

Bad Axe back saws The hand-sharpened saw blade, made of Swedish spring steel, is attached to a gunmetal-finished steel back that allows it to be tightened or, when necessary, completely replaced. The hickory handles (different sizes...
variants
€309.00

incl. VAT plus shipping costs

Article No. 712344

Bad Axe Carcass Saw, X-Cut, Regular Handle Size

Bad Axe Carcass Saw, X-Cut

Bad Axe back saws The hand-sharpened saw blade, made of Swedish spring steel, is attached to a gunmetal-finished steel back that allows it to be tightened or, when necessary, completely replaced. The hickory handles (different sizes...
variants
€309.00

incl. VAT plus shipping costs

Article No. 712346

Bad Axe Tenon Saw, Hybrid-Cut, Regular Handle Size

Bad Axe Tenon Saw, Hybrid-Cut

Bad Axe back saws The hand-sharpened saw blade, made of Swedish spring steel, is attached to a gunmetal-finished steel back that allows it to be tightened or, when necessary, completely replaced. The hickory handles (different sizes...
variants
€329.00

incl. VAT plus shipping costs

Article No. 712348

Bad Axe Tenon Saw, Rip-Cut, Regular Handle Size

Bad Axe Tenon Saw, Rip-Cut

Scies à dos Bad Axe The hand-sharpened saw blade, made of Swedish spring steel, is attached to a gunmetal-finished steel back that allows it to be tightened or, when necessary, completely replaced. The hickory handles (different sizes...
variants
€329.00

incl. VAT plus shipping costs

Article No. 712350

Dovetail Saw PAX 1776, 10 Inch, Rip Cut, Pistol Grip Handle

Dovetail Saws PAX 1776, 10 Inch, Rip Cut

Precise, highly efficient back saw that produces a clean cut face. Triangular teeth for rip cuts on the push stroke, especially for dovetail joints. The minimum set makes it easier to saw a straight line.
variants
€196.90

incl. VAT plus shipping costs

Article No. 712583

Dovetail Saw PAX 1776, 10 Inch, Crosscut, Pistol Grip Handle

Dovetail Saws PAX 1776, 10 Inch, Crosscut

Precise, highly efficient back saw that produces a clean cut face. Triangular teeth that cut on the push stroke, especially for dovetail joints. The minimum set makes it easier to saw a straight line.
variants
€196.90

incl. VAT plus shipping costs

Article No. 712582

Tenon Saw PAX 1776, 10 Inch, Rip Cut, Pistol Grip Handle

Tenon Saws PAX 1776, 10 Inch, Rip Cut

This back saw is perfect for rip cuts such as cutting mortise and tenon joints. This optimally balanced saw with specific toothing cuts efficiently on the push stroke and without jamming.
variants
€196.90

incl. VAT plus shipping costs

Article No. 712581

Tenon Saw PAX 1776, 10 Inch, Crosscut, Pistol Grip Handle

Tenon Saws PAX 1776, 10 Inch, Crosscut

This back saw is perfect for cross cuts such as cutting mortise and tenon joints. This optimally balanced saw with specific toothing cuts efficiently on the push stroke and without jamming.
variants
€196.90

incl. VAT plus shipping costs

Article No. 712580

Veritas Dovetail Saw, Fine

Veritas Dovetail Saw

Back saw with fine rip teeth that cut on the push stroke, especially for dovetail joints and small mortise and tenon joints. The extra-thin saw blade allows efficient and clean cuts. The minimum set makes it easier to saw a straight...
variants
€85.90

incl. VAT plus shipping costs

Article No. 712919

Veritas Rip Tenon Saw

Veritas Rip Tenon Saw

For all rip cuts, such as mortise and tenon joints. With its teeth that cut on the push stroke, this large tenon saw cuts extremely well and 100 mm deep.
€144.90

incl. VAT plus shipping costs

Article No. 703598

Veritas Crosscut Tenon Saw

Veritas Crosscut Tenon Saw

For trimming large wood sections and cutting tenon shoulders. The medium-fine rip teeth cut on the push stroke and ensure precise, clean cuts across the grain.
€144.90

incl. VAT plus shipping costs

Article No. 703597

Veritas Gent's Saw, Crosscut

Veritas Gent’s Saw

These saws, which are made in Canada, have an extra-thin saw blade with a high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good...
variants
€67.00

incl. VAT plus shipping costs

Article No. 712913

Veritas Gent's Saw, Crosscut, with Pistol-type Handle

Veritas Gent's Saw, Crosscut, with Pistol-type Handle

Back saw with fine triangular teeth that cut on the push stroke for extra-fine cuts across the grain. The ultra-smooth and clean cuts make this saw ideal for cutting tenons, halved joints and trimming small workpieces. Rake angle 15°....
€93.60

incl. VAT plus shipping costs

Article No. 728977

Back Saw Powergrip 150

Back Saw Powergrip 150

Small Japanese saw with interchangeable blade for all fine wood cuts in model work and hobby work. The rubberised handle fits the hand comfortably. For cuts across the grain.
€19.90

incl. VAT plus shipping costs

Article No. 712714

Back Saw for Hardwood 165

Back Saw for Hardwood 165

Small saw that cuts on the pull stroke for fine detail work in model-building, musical instrument making and restoration work. Unset saw blade with reinforced back.
€25.20

incl. VAT plus shipping costs

Article No. 712710

Veritas Saw Depth Stop

Veritas Saw Depth Stop

Here is a simple way to consistently control cut depth when using a backsaw. The 228 mm long aluminum rail is lightweight and easy to attach to the side of the blade with a high-friction magnetic strip. The stop can be attached to the...
€36.50

incl. VAT plus shipping costs

Article No. 712526

Knew Concepts Coping Saw, Heavy Duty, with Swivel Blade, Jaw depth 75 mm

Knew Concepts Coping Saw, Heavy Duty, with Swivel Blade

High-quality, handy and very robust coping saw for woodworking and goldsmith work. Red powder-coated frame. Comes with saw blade. Tougher than the standard model due to additional cross struts in the frame construction Swivel blade...
variants
€127.40

incl. VAT plus shipping costs

Article No. 712555

Knew Concepts Coping Saw, Heavy Duty, Jaw Depth 200 mm

Knew Concepts Coping Saw, Heavy Duty, Jaw Depth 200 mm

High-quality, handy and very robust coping saw for woodworking and goldsmith work. Red powder-coated frame. Comes with saw blade. Tougher than the standard model due to additional cross struts in the frame construction Tensioning...
€143.50

incl. VAT plus shipping costs

Article No. 712554

Knew Concepts Coping Saw with Swivel Blade

Knew Concepts Coping Saw with Swivel Blade

High-quality, ultra-light, handy coping saw for woodworking and goldsmith work. Red anodised frame. Comes with saw blade. Saw blade swivels to two additional positions (45° to the right or left) Tensioning mechanism with screw and lever...
€127.90

incl. VAT plus shipping costs

Article No. 712553

Freeway Diamond Saw

Freeway Diamond Saw

The diamond particles embedded in the blade allow this saw to be used for cutting the hardest materials like steel, stone, ceramic, or glass in any direction. Comes with one diamond saw blade Ø 1.6 mm and one conventional blade Ø 1 mm.
€24.60

incl. VAT plus shipping costs

Article No. 712514

Grobet Coping Saw 75

Grobet Coping Saw

Premium design with perfect balance and high stability. The Swiss-made coping saw frame allows precise and effortless cutting. Perfect for intarsia, mother-of-pearl or goldsmith work and other artisan and precise mechanical applications....
variants
€34.70

incl. VAT plus shipping costs

Article No. 712548

Knew Concepts Coping Saw, Jaw Depth 125 mm

Knew Concepts Coping Saw

High-quality, ultra-light, handy coping saw for woodworking and goldsmith work. Red anodised frame. Comes with saw blade. Tension screw for precise and simple tensioning Ultra-light and torsion-resistant frame of heat-treated aluminium
€87.40

incl. VAT plus shipping costs

Article No. 712551

Pégas Skip Coping Saw Blades, Width 0.76 mm, 12-Piece Set

Pégas Skip Coping Saw Blades

Universal wide tooth blade to handle even complex shapes. Good surface quality, even during fast feed. Excellent for all hardwood types.
variants
€2.70

incl. VAT plus shipping costs

Article No. 704820

variants
€6.60

incl. VAT plus shipping costs

Article No. 740229

DICTUM Keyhole Saw 150, Power Grip

DICTUM Keyhole Saw 150, Power Grip

Robust saw with a long slim blade, ideal for cutting holes and curves. Idealfor on-site use as it can be easily disassembled and stored. Quick-change fastener for easy changing of blade or handle - locked twice for a perfect fit
 
€29.60

incl. VAT plus shipping costs

Article No. 712398

DICTUM Akagashi Keyhole Saw 150

DICTUM Akagashi Keyhole Saw 150

The long slim blade makes this saw ideal for cutting holes and curves. Handmade ergonomic handle of oiled Japanese red oak Quick-change fastener for easy changing of blade or handle - locked twice for a perfect fit
 
€51.30

incl. VAT plus shipping costs

Article No. 712167

Keyhole Saw 180

Keyhole Saw 180

Ideal for precise curves and recesses.
€14.20

incl. VAT plus shipping costs

Article No. 712613

Keyhole Saw 120

Keyhole Saw 120

Ideal for precise curves and recesses.
€12.90

incl. VAT plus shipping costs

Article No. 712614

Mitsukawa »Expert 70« Compass Saw

Mitsukawa »Expert 70« Compass Saw

The long and narrow blade shape is particularly suitable for narrow hole and curved cuts. Long-lasting sharpness due to pulse-hardened teeth.
€38.80

incl. VAT plus shipping costs

Article No. 712689

Cutter Compass Saw, Pull Stroke

Cutter Compass Saw

Practical cutter compass saw for the workshop or on the construction site. The impulse-hardened tooth tips of the high-quality interchangeable blade cut either on the pull stroke (No. 715120 ) or on the push stroke (No. 715122 ) in wood,...
variants
€15.90

incl. VAT plus shipping costs

Article No. 715120

Nobex Double Mitre Saw Champion 180, Set

Nobex Double Mitre Saw Champion 180, Set

Precise, versatile mitre saw made in Sweden with solid aluminum construction, equipped with exact blade guides that ensure straight cuts as well as a stepless angle setting and additional locking at any angle. Two integrated clamps hold...
€344.50

incl. VAT plus shipping costs

Article No. 712549

Saw Guide Set

Saw Guide Set

This mitre box is fully adjustable in angle and inclination and therefore ideal for making tear-out-free, highly accurate mitre cuts of battens, frames and joints. The long edge fence allows boards and panels to be trimmed or bevelled...
€69.90

incl. VAT plus shipping costs

Article No. 712461

4 of 74