Prices with or without VAT?
This setting applies to all prices but may be changed at any time.
 

Veritas Plane Body for Jack Plane No. 5, O1 Blade

This product is no longer available.
For rough work where flattening or stock removal is the goal Suitable for smoothing or...
Incl. O1 Steel Blade
  • For rough work where flattening or stock removal is the goal
  • Suitable for smoothing or jointing, depending on scale of workpiece
Custom Bench Planes
All the plane bodies are fully stress-relieved ductile cast iron. The soles are machined flat and square to the sides, and they have extra-large side wings for stable shooting. The planes all have a stainless-steel Norris-type combined feed and lateral adjustment mechanism for easy and accurate blade setting. Two set screws register the blade in the throat. The movable toe plate allows quick mouth adjustments - loosening the front knob lets you close the mouth to a narrow slit for fine shavings and minimum tear-out, or open it for heavier cuts. A stop-screw in the throat retains mouth settings and prevents accidental contact with the blade.
The cap iron registers on a low-profile blade carrier attached to the blade, which allows fast removal of the cap iron for blade sharpening. It also lets you restore the cap iron without losing its position relative to the cutting edge. The cap iron registers on a low-profile blade carrier attached to the blade, which allows fast removal of the cap iron for blade sharpening. It also lets you restore the cap iron without losing its position relative to the cutting edge.
     
    more
    less
    Hier finden Sie weitere Details zum Hersteller

    Veritas

    • Blade material O1
    • Blade width 51 mm
    • Overall length 355 mm
    • Weight 2.39 kg
    Article no. 702444
    Brand Veritas
    €244.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Including sharpening pass, two free sharpenings.
    Remember
    Many other models
    Type Price Quantity
    Veritas Plane Body for Jack Plane No. 5, O1 Blade
    Veritas Plane Body for Jack Plane No. 5, O1 Blade

    Incl. O1 Steel Blade

    Article number 702444
      €244.00
     

     
     
    Plenty of accessories and spare parts

    Accessories

    Veritas Frog 51 mm, 40°

    Veritas® Frog 51 mm

    Fits No. 702410 and 702412 . Cutting angle 40°: Suitable for end-grain fibers Cutting angle 55°: Suitable for dealing with tear-out in difficult grain and figured wood
    €51.00

    incl. VAT plus shipping costs

    Article No. 702419

    Veritas Traditional Tote, Large

    Veritas® Traditional Tote

    More pronounced forward angle lean and more curved than the Veritas tote More comfortable to use on low surfaces Allows you to apply more downward force to the plane Based on historical plane handle design Sizing Information:...
    €21.00

    incl. VAT plus shipping costs

    Article No. 702433

     

    Replacement parts

    Veritas O1 Steel Blade, 51 mm

    Veritas O1 Steel Blade, 51 mm

    60 mm blade width fits No. 702442 , 702446 , 702448 51 mm blade width fits No. 702440 , 702444
     
    €32.20

    incl. VAT plus shipping costs

    Article No. 702415

     
    Viewed