Mini Easy Rougher
Roughing-out gouge, spindle gouge, bowl gouge and chisel in one universal tool for roughing out and rough preparation of all workpieces, including the insides of bowls, and for finishing straight-lined and slightly curved contours. Incl....
€112.00
incl. VAT plus shipping costs
Article No. 732037
Mini Easy Detailer
For turning fine contours, undercuts, intricate work, hollows and V-grooves. Handle colour: yellow.
€112.00
incl. VAT plus shipping costs
Article No. 732071
Mini Easy Finisher
For rough-turning and finishing concave and convex contours in spindle and faceplate work. Comes with Ø 12 mm carbide cutter. Handle colour: red.
€112.00
incl. VAT plus shipping costs
Article No. 732070
Crown Cryogenic Hollowing Tool
Hollowing tool for fine finishing. The probe is well-suited for hard woods, for cutting grooves and sharp undercuts as well as making delicate cuts, while the included scrapers are used for finishing already cut surfaces. All cutters are...
€71.30
incl. VAT plus shipping costs
Article No. 702049
Crown Tungsten Extreme Carbide Tool
These tools make it possible to perform the work that is traditionally done by means of a roughing-out gouge, spindle gouge, chisel, bowl gouge and scraper. Easy-to-handle, lightweight yet very robust tool for removing large quantities...
€132.00
incl. VAT plus shipping costs
Article No. 720888
Crown Tungsten Extreme Deep Hollowing Tool, XXL
Easy-to-handle, lightweight yet very robust tool for removing large quantities of material from deep hollow bodies. The structure of the rectangular, high-edged shaft cross section was inspired by the geometry of beams in structural...
€139.00
incl. VAT plus shipping costs
Article No. 720890
Crown Tungsten Extreme Hollowing Tool, Articulated Head, XL
Ideal for turning undercuts on hollow shapes. With its modular articulated design, the tool can be optimally adjusted to the workpiece. The carbide cutter ensures safe and clean working, even with poor visibility in hollow bodies.
€153.00
incl. VAT plus shipping costs
Article No. 720827
Crown Tungsten Extreme Hollowing Tools
For hollowing out and turning undercuts on vessels. The carbide cutter ensures safe and clean working, even with poor visibility in hollow bodies. Advantages: Safe guidance - ideal for woodturning beginners No adjustment of the cutting...
€69.90
incl. VAT plus shipping costs
Article No. 720825
Crown Ring Tool, Stained Beech Handle
Ideal tool for hollowing into end grain on thin-walled wet-wood objects such as cups and vases. Thin double-bevelled M2-HSS ring, designed for light-duty use. Stained beech handle.
€53.20
incl. VAT plus shipping costs
Article No. 701931
Crown Revolution
For specialised use in cutting along and across the grain. The fully depth-adjustable head (Super Ring) enables this tool to be used securely in extremely undercut hollow forms such as vases and other deep vessels, even when it is...
€289.00
incl. VAT plus shipping costs
Article No. 702060
Crown Midi Revolution
The larger version of the Crown Mini Revolution. Impressively versatile tool for cuts along and across the grain. Thanks to the fully depth-adjustable head (Super Ring), the tool can be used with confidence in small undercut hollow forms...
€109.00
incl. VAT plus shipping costs
Article No. 702169
Crown Mini Revolution
This compact version of the original Crown Revolution is an impressively versatile tool for cuts along and across the grain and offers an excellent price/performance ratio. Thanks to the fully depth-adjustable head (Super Ring), the tool...
€97.60
incl. VAT plus shipping costs
Article No. 702120
Crown Tungsten Extreme Pen Size Carbide Tool
These tools enable easy working and can therefore also be used by beginners without any problems. Ideal for turning pens, intricate woodturning or small boxes. The carbide cutters have a long service life, even with abrasive materials...
€69.60
incl. VAT plus shipping costs
Article No. 729659
Martel Hook Tool, Set with Oneway Sure-Grip Handle
Martel hook tools size 1 and size 2 (No. 729637 and 729638 ) with matching shanks no. 1 and no. 2 (No. 729641 and 729642 ) and Oneway Sure-Grip handle with changing bores (No. 729647 ). For diameters up to 300 mm.
€249.00
incl. VAT plus shipping costs
Article No. 729651
Oneway Sure-Grip Handle, 450 mm
Developed by Canadian woodturner Michael Hosaluk. These heavy-duty handles with stainless steel core and two fixing screws fit comfortably in the hand and allow tools to be changed quickly. Bore ½ inch (12.7 mm) and ⅝ inch (15.9 mm)....
€57.50
incl. VAT plus shipping costs
Article No. 729647
Hamlet Craft Tools Brother System 2
Compact design for use in spindle and faceplate work. Simple adjustment of the shaft and fast, effective hollowing. The new blade design with full depth adjustment allows you to set the depth of the cut individually. This ensures safe...
€141.70
incl. VAT plus shipping costs
Article No. 702118
Hamlet Craft Tools Little Sister
This compact version of the Brother System 2 offers good value for money and can be used for cutting both along and across the grain. The new blade design with full depth adjustment allows you to set the depth of the cut individually and...
€83.50
incl. VAT plus shipping costs
Article No. 702119
Hamlet Craft Tools Stuart Mortimer Gouge
This gouge, designed by professional turner Stuart Mortimer, is ideal for hollowing out deep objects, for example vases. Its short flute leaves more strength in the shaft for increased rigidity, which allows the tool to absorb any...
€50.00
incl. VAT plus shipping costs
Article No. 702032
Full-Size Easy Rougher
The replaceable carbide cutters with 93 HRC and meticulously designed blade geometry open up a simple, safe and effective way of turning, unequalled by any other turning tool. The ultra-sharp blades with an extra-long edge life are...
€148.00
incl. VAT plus shipping costs
Article No. 702317
Full-Size Easy Finisher
The replaceable carbide cutters with 93 HRC and meticulously designed blade geometry open up a simple, safe and effective way of turning, unequalled by any other turning tool. The ultra-sharp blades with an extra-long edge life are...
€148.00
incl. VAT plus shipping costs
Article No. 702318
Full-Size Easy Detailer
The replaceable carbide cutters with 93 HRC and meticulously designed blade geometry open up a simple, safe and effective way of turning, unequalled by any other turning tool. The ultra-sharp blades with an extra-long edge life are...
€148.00
incl. VAT plus shipping costs
Article No. 702319
Mid-Size Easy Hollower
For undercutting hollow forms. Available in three shapes, depending on the difficulty of the undercut: straight, slightly curved or with a true curve. The replaceable carbide cutters with 93 HRC and meticulously designed blade geometry...
€149.60
incl. VAT plus shipping costs
Article No. 702325
Wiedemann Holder for Ring Cutter with Handle
Straight holder for Wiedemann ring cutter. The 13 mm model is the standard version. If you prefer more weight and rigidity, we recommend the 16 mm version. Overall length 565 mm. Fits No. 702350 and 702352 .
€55.70
incl. VAT plus shipping costs
Article No. 702353
Wiedemann Tool Holder with Handle
Universal tool holder for Wiedemann hook tools. When used with an adapter, it can also hold the Wiedemann ring cutters. Bore 8 mm. Overall length 565 mm.
€41.30
incl. VAT plus shipping costs
Article No. 702364
Wiedemann Universal Tool Holder with Handle Ø 16 mm, bore...
Universal tool holder for hollowing tools with shaft diameter 10 mm. Bore 10 mm. Overall length 565 mm.
€44.80
incl. VAT plus shipping costs
Article No. 702376
Munro Tool
A perfect tool to create large and deep hollow forms. The Jumbo and Wundercutt 10 are equipped with a depth gauge, a cutting wheel and mountable joints. The joints allow an optimal cutting head adjustment, no matter if you are right- or...
€269.00
incl. VAT plus shipping costs
Article No. 728958
Sorby Captive Ring Tool, 5-piece Set
Easy-to-use tool for the production of loose and captured rings with different diameters. The set contains four interchangeable ring cutters (4.8 / 6.3 / 9.5 / 12.7 mm), which can also be mounted at an angle on the tool carrier for work...
€74.80
incl. VAT plus shipping costs
Article No. 701729
Jimmy Clewes Hollowing Tool Mate
The ideal tool for beginners and for turning bowls and jars. li>Replacement cutter included Comes without handle. Jimmy Clewes recommends making your own handle of at least 450 mm lenght and tool holder No. 720031 or No. 720047 in...
€145.00
incl. VAT plus shipping costs
Article No. 720026
Jimmy Clewes Box Scraper
For finishing jar walls and bottoms. Made of CPM 10V (A-11), a unique, powder-metallurgical high-performance steel with high vanadium alloy. Extra durable, with excellent toughness, hardness and cutting-edge stability. Hardness 60-62...
€74.90
incl. VAT plus shipping costs
Article No. 720030
Jimmy Clewes Tool Holder, Standard, Ø 12.7 mm
Fits Jimmy Clewes Hollowing Tools Mate (No. 720026 , No. 720027 ) and all steels with tang diameter 9 x 9 mm or 12.7 mm. The turning tools are fixed securely and without vibration in the anodised aluminium tool holder with two screws....
€44.90
incl. VAT plus shipping costs
Article No. 720031
Jimmy Clewes Mega Mate #2 Hollowing Tool
An ideal tool for hollowing deep vessels. Thanks to its robust, square cross-section, the Mega Mate is particularly stable, torsion and vibration-resistant. Replacement cutter included. Cutting diameter 8 mm, angle 32°. The larger...
€179.00
incl. VAT plus shipping costs
Article No. 720048
Crown Bowl Gouge Blades
These solid bowl gouge blades are fitted onto the Crown Revolution handle and can be adjusted in length. Ready-to-use fingernail grind. Cryogenically hardened HSS (No. 702048 is be used with adapter No. 800432 ).
€65.10
incl. VAT plus shipping costs
Article No. 702048
Crown Negative Rake Scraping Tip
For smooth finishing of both inside and outside surfaces of a workpiece. The negative rake setting prevents the blade from catching in the workpiece. Compatible with the Crown Cryo Turning Tool or Crown (Mini) Revolution. Cryogenically...
€54.50
incl. VAT plus shipping costs
Article No. 702061
Crown Sharpening Stick for Cutters
This long brass sharpening stick will hold two cutters securely during the sharpening process.
€30.30
incl. VAT plus shipping costs
Article No. 702062
Crown Probe
Ideal for hollowing out deep vessels made of very hard woods and for delicate cuts. Compatible with the Crown Cryo Turning Tool or Crown (Mini/Midi) Revolution. Cryogenically hardened M2-HSS.
€40.30
incl. VAT plus shipping costs
Article No. 702064
Crown Heart Scraper
Compatible with the Crown Cryo Turning Tool or Crown (Mini) Revolution. Cryogenically hardened M2-HSS.
€21.70
incl. VAT plus shipping costs
Article No. 702066
Crown Egg Scraper
Compatible with the Crown Cryo Turning Tool or Crown (Mini) Revolution. Cryogenically hardened M2-HSS.
€21.60
incl. VAT plus shipping costs
Article No. 702067
Crown Key Cutter
Compatible with the Crown Cryo Turning Tool or Crown (Mini) Revolution. Cryogenically hardened M2-HSS.
€21.60
incl. VAT plus shipping costs
Article No. 702068
€33.60
incl. VAT plus shipping costs
Article No. 720828
Crown Shaft Attachment with Carbide Cutter
Special tool for turning hollow shapes. The carbide cutter ensures safe and clean working, even with poor visibility in hollow bodies. The replaceable cutters with a hardness of 93 HRC and a careful and elaborate cutting geometry offer a...
€59.40
incl. VAT plus shipping costs
Article No. 702208
Crown Replacement Carbide Cutter, 8 mm
Fits No. 702208 , 702209 , 702211 , 720824 , 720824 and 720826 .
€21.90
incl. VAT plus shipping costs
Article No. 702210
Crown Revolution Carbide Cutter Attachment
This carbide cutting attachment can be mounted onto the Crown Revolution (Mini/Midi), allowing the Crown Revolution to be also used with replaceable carbide cutters.
€61.60
incl. VAT plus shipping costs
Article No. 702211
€30.50
incl. VAT plus shipping costs
Article No. 701945
€29.50
incl. VAT plus shipping costs
Article No. 701944
€31.90
incl. VAT plus shipping costs
Article No. 701946
€30.30
incl. VAT plus shipping costs
Article No. 702059
€29.90
incl. VAT plus shipping costs
Article No. 702065
Crown Revolution Adapter
Fits No. 702048 , 702208 and 702209 . Inside diameter 13 mm. Outside diameter 16 mm.
€37.10
incl. VAT plus shipping costs
Article No. 800432