Special tools for musical instruments

3 of 24
Bow Maker‘s Plane, Blade Width 30 mm

Bow Maker‘s Plane, Blade Width 30 mm

An upright 90° positioned blade setup of a wooden plane for uneven hardwoods (pernambuco, ebony). Brass sole, HSS blade for cutting-edge durability.
 
€58.20

incl. VAT plus shipping costs

Article No. 702525

€13.70

incl. VAT plus shipping costs

Article No. 702515

Fingerboard Block Plane, Blade Width 30 mm

Fingerboard Block Plane, Blade Width 30 mm

Block plane with a very low blade angle and precisely machined narrow mouth opening. It allows extra-thin material removal, that is necessary for a perfect shaping of the cello and bass fingerboard. Brass body, ergonomically shaped brass...
 
€94.90

incl. VAT plus shipping costs

Article No. 702548

Herdim Scraper Blade, 0.30 mm

Herdim Scraper Blades

Very even metal structure for a fine burr that is achieved by a special hot rolling process with simultaneous hardening treatment. Hot-rolled - the entire material is elastic and has an even structure Made of spring steel with a small...
variants
€4.10

incl. VAT plus shipping costs

Article No. 703541

Herdim Scraper Blade, Stainless Steel, 0.25 mm

Herdim Scraper Blades, Stainless Steel

Thanks to the use of stainless steel, this scraper blade is permanently protected against patches of rust caused by hand perspiration. It is also three times more durable than spring steel scrapers. Hot-rolled - the entire material is...
variants
€4.10

incl. VAT plus shipping costs

Article No. 703544

Tapered Chisel, Blade Width 6 mm

Tapered Chisels

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners and notches. Cutting edge of White Paper Steel. The handles are made of Japanese red oak and have forged steel hoops.
variants
 
€46.50

incl. VAT plus shipping costs

Article No. 710210

Herdim Opening Chisel

Herdim Opening Chisel

Using this tool makes opening of the instrument an easy task. Tapered blade can be easily bounced with hammer on the thicker (2 mm) end, very thin blade 0.4 mm easily opens the plate-rib joint. The corner and endblocks can be gently...
 
€41.70

incl. VAT plus shipping costs

Article No. 700376

Herdim Scroll Gouge, Sweep 5 / 13 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€49.10

incl. VAT plus shipping costs

Article No. 715531

Herdim Scroll Gouge, Sweep 6 / 16 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€50.90

incl. VAT plus shipping costs

Article No. 715533

Herdim Scroll Gouge, Sweep 7 / 5 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€49.30

incl. VAT plus shipping costs

Article No. 715536

Herdim Scroll Gouge, Sweep 8 / 5 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€48.70

incl. VAT plus shipping costs

Article No. 715539

3 of 24