Pégas Footswitch for Scroll Saws with Undervoltage Release

Footswitch for turning the scroll saw on and off. The switch is delivered without a power plug and must be connected directly to the main switch of the Pegas scroll saw. Caution: installation of this foot switch will deactivate the undervoltage release (the switch is triggered by a reduction of the voltage from the power source and must be switched back on when voltage returns to normal. This prevents the machine from switching back on accidentally!
The stroke rate or machine speed are not controlled with the footswitch, which only serves to turn the machine on and off (switch pressed = machine on). A long service life of up to 100,000 switching cycles.
Specification: Number of poles=1, connection clamps M3, load limit 250V/14(4)A AC, Approbation IP 65/IP 67, ENEC 10, temperature range -20/85 °C
Note: It should only be installed by a qualified electrician! The footswitch deactivates the undervoltage release.