Lamello Fixing Pins for Divario, 50 Pieces

With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the components during insertion, creating clean tight joints. The clamping action only occurs at certain points rather than across the entire insertion length, making the components easier to insert. Due to the strong connection between the work pieces, the joint is able to carry high tensile forces. Clamping aids and adhesive are not required to insert the components. As a result, the connector makes it possible to assemble the components at the most cost-effective stage in the chain, whether at production, storage, transportation or assembly. The connector can be fully or only partially fitted on site. Moreover, the fitting is detachable for transportation. The P-System groove for the fitting can either be created using CNC technology or very simply by hand using the Zeta P2 power tool from Lamello.
Benefits:

• Completely invisible joint for highest quality standards
• Joins and clamps during insertion for perfectly closed joints
• Efficient machining and installation with a CNC or a Zeta based on the P-System
• Narrow element for the use in shelves from 19 mm
• No resistance while inserting until shortly before building the clamping force
• Insertion of shelves after transport for lower transport weight
• Fitting to insert by hand or install by hammer
• Fixing pins to drive into the wood for efficient installation
• Possible in the factory or on site with a CNC or a Zeta P2
• Joint with high tensile strength
• No clamps or presses necessary
• The outer cabinet can be joined in a first process
• Assembly of the complete furniture piece on site possible (flat pack)
• Insertion of the shelves without glue or clamping aids
• Detachable for transport