Bandsaw Buddy is a unique alignment tool for parallel fences on bandsaws. Due to the convex running surfaces on the rollers, the saw band is distorted depending on the tension and settings. This is generally not visible to the naked eye. For aligning the fences for parallel cuts, the 250 mm long Bandsaw Buddy is attached to the saw band via integrated magnets, and serves as an extension of the saw band width. This allows the parallel fence to be aligned rapidly and in a precise right angle. 16 drill holes allow circles to be marked in 25 mm steps, with a diameter of 75 to 400 mm. Made of anodised aluminium, with scale on the broadside.