PantoRouter for Milling Motors Ø 88,7 mm

The original - for individual, precise, quick and simple working

The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the...
Fits plung router Draper Expert MR1300, Devon 1316, CRAFTSMAN, Porter Cable with Ø 88,7 mm.
The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working position (x-/y-axis), you can also exactly set the working depth (z-axis) or the drilling depth of the router bit. Depending on the diameter of the motor clamping collar, round-type routers such as AEG MF 1400 KE (P.R. Nr. 720557), Draper Expert MR1300 (P.R. Nr. 720556) or milling motors with 43 mm Euro clamping neck (P.R. Nr. 720757) can be used.
Thanks to templates you can also scan tenon diameters, dovetail shapes and distances, drilling patterns or freely designed contours. With the original templates you can mill e.g. mortise and tenon with one and the same setting and increase and decrease the accuracy without changing the template.
Copying pins with ball bearings in various diameters make it possible to adjust e.g. the size of a milling pattern without changing the template.
The router table is steplessly tiltable and enables milling, e.g. of angled tenons, grooves or dowel holes into mitre surfaces or also name signs.
Your benefits:
  • Height-adjustable mount for templates
  • Mortise and tenon templates enable fine tuning of the accuracy
  • Easily adjustable and precise scanning unit
  • Exact alignment of the milling motor
  • Tiltable machine table made of warp-resistant aluminium
  • Depth stop with scale
  • Light-weight yet warp-resistant construction
  • Horizontal workpiece attachment, allowing the processing of longer lengths
  • Almost no limits, thanks to template self-construction

The PantoRouter - the original:
The PantoRouter we are offering was developed with the assistance of its inventor, the Canadian of German origin, Matthias Wandel. The entire base is made of warp-resistant cast aluminium. A high-quality varnish guarantees permanent protection, even under extreme climatic conditions (salt water tested). A newly developed motor terminal enables an exactly perpendicular position to the workpiece. The machine table, tiltable up to 90°, offers versatile application options. The effective extraction hood is available as accessory for the original PantoRouter only.

    Scope of delivery

    • PantoRouter with engine mount, fits milling motor with Ø 88.7 mm, e.g. Draper Expert MR1300
    • V3 template holder with setting gauge for material thickness
    • Square incl. clamping lever, pair
    • Square incl. wing nut, pair
    • Horizontal tenon template MT3H and MT5H
    • Vertical tenon template MT3V and MT5V
    • Copying pin, Ø 10 mm
    • Copying pin, Ø 15 mm
    • Copying pin, Ø 20 mm
    • Copying pin, Ø 22 mm
    • Centring pin
    • Depth stop with mm and inch scale

    Supplied without milling motor
     
    more
    less
    Further details on the manufacturer

    PantoRouter

    Weitere Infos und Tipps und Tricks zur Anwendung des PantoRouter finden Sie hier.

     
     
     
    If you buy a PantoRouter from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop.
     
    Article no. 720556
    Brand PantoRouter
    Ready to ship today, delivery time 2-3 workdays within Germany
    €998.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    PantoRouter for Milling Motors Ø 88,7 mm
    PantoRouter for Milling Motors Ø 88,7 mm

    Fits plung router Draper Expert MR1300, Devon 1316, CRAFTSMAN, Porter Cable with Ø 88,7 mm.

    Article number 720556
      €998.00
     
    PantoRouter for Milling Motors Ø 91,8 mm
    PantoRouter for Milling Motors Ø 91,8 mm

    Fits plung router AEG MF 1400 KE with Ø 91,8 mm.

    Article number 720557
      €998.00
     
    PantoRouter for Milling Motors Ø 43 mm
    PantoRouter for Milling Motors Ø 43 mm

    Fits milling motors with clamping collar Ø 43 mm.

    Article number 720757
      €1,029.00
     
    PantoRouter incl. MAFELL Milling Motor FM 1000 Price advantage
    PantoRouter incl. MAFELL Milling Motor FM 1000

    Incl. milling motor MAFELL FM 1000 with clamping collar Ø 43 mm.

    Article number 720755
      €1,269.00
     
    Plenty of accessories and spare parts

    Accessories

    Vertical Tenon Templatel MT5V, 2 Pieces

    Vertical Tenon Template

    Tenon template with levelling pin on the back for exact vertical positioning. Fits PantoRouter.
    €20.60

    Article No. 720564

    Featherboard for PantoRouter, Finger-Joints

    Milling Featherboard for PantoRouter®

    The milling featherboard is mounted on the template holder of the PantoRouter. The template can be scanned with a Ø 10 mm copying pin. Made of 4.45 mm galvanised steel. Length 400 mm. Incl. mounting screws. Suitable for PantoRouter.
    variants
    €56.70

    incl. VAT plus shipping costs

    Article No. 720567

    Centering Scale Fence for PantoRouter

    Centering Scale Fence for PantoRouter®

    For perpendicular positioning of the workpieces on the router table. Incl. two clamping screws. Fits PantoRouter.
    €49.50

    incl. VAT plus shipping costs

    Article No. 720568

    PantoRouter Dust Collection Hood with Brush Ring

    PantoRouter® Dust Collection Hood with Brush Ring

    Enables dust-free working and extracts the shavings exactly where they are produced. Fits PantoRouter. Incl. assembly screws. Exhaust Nozzle Ø 34/40 mm.
    €154.00

    incl. VAT plus shipping costs

    Article No. 720569

    Copying Pin, Ø 35 mm

    Copying pins for PantoRouter®

    Copying pins with ball bearing are used for scanning the contours of templates (with the ball bearing). The diameter of all copying pins is 6 mm. Length 90 mm. Fits PantoRouter.
    variants
    €13.30

    incl. VAT plus shipping costs

    Article No. 720650

    NVR Switch with Europlug

    NVR Switch with Europlug

    The switch unit can be mounted on e.g. router or saw tables in order to easily switch the attached machines on or off. The machine cable is plugged into the switch box, which is connected to the power supply. The undervoltage release...
    €42.90

    incl. VAT plus shipping costs

    Article No. 707989

    Hold Down Clamp for DICTUM T-Track

    Hold Down Clamp for DICTUM® T-Track

    Workpieces are securely clamped to milling templates or fixtures with hold down clamps. These are made of solid aluminium and fit all T-tracks with an inner dimension of 12.1 mm x 7.3 mm. A large star knob enables simple handling. With...
    €9.90

    incl. VAT plus shipping costs

    Article No. 727341

    Mortise and Tenon Templates, 7-Piece Set

    Mortise and Tenon Templates, 7-Piece Set

    5 different lengths of tenon templates with levelling tenons on the back for exact horizontal or vertical alignment. The outer contour of these templates is bevelled to allow fine adjustment of the fit. If the ball bearing is used to...
    €39.00

    incl. VAT plus shipping costs

    Article No. 720574

    Variable/Fixed Space Dovetail Templates, 8-Piece Set

    Variable/Fixed Space Dovetail Templates, 8-Piece Set

    The templates are attached to the PantoRouter template holder at equal or different distances to obtain even or irregular dovetail spacings. The lateral spacers allow even distances to be set without measuring when the stencils are...
    €39.90

    incl. VAT plus shipping costs

    Article No. 720941

    Festool DOMINO Assortment DS 4/5/6/8/10 1060x BU

    Festool DOMINO Assortment DS 4/5/6/8/10 1060x BU

    Systainer SYS 2 T-LOC with DOMINO dowels and suitable router bits. 1060 pieces.
    €199.00

    incl. VAT plus shipping costs

    Article No. 706724

    Festool DOMINO Beech D 10X50/85 BU

    Festool DOMINO Beech BU

    Wooden dowels with expanding glue slots and lateral ribs for optimum fitting accuracy. 100% rotation-proof right from the first Domino.
    variants
    €14.60

    incl. VAT plus shipping costs

    Article No. 706734

     

    Replacement parts

    Template Holder

    Template Holder

    Entirely made of aluminium. With three T-tracks and mm and inch scale. Fits PantoRouter.
    €89.00

    incl. VAT plus shipping costs

    Article No. 720560

    variants
    €16.40

    incl. VAT plus shipping costs

    Article No. 720559

    Centring Pin Ø 12/12.7 mm

    Centring Pin Ø 12/12.7 mm

    For centring the router position and the router table centre. Fits PantoRouter.
    variants
    €10.20

    incl. VAT plus shipping costs

    Article No. 720570

    Centring Pin Ø 6/8 mm

    Centring Pin Ø 6/8 mm

    For centring the router position and the router table centre. Fits PantoRouter.
    variants
    €10.20

    incl. VAT plus shipping costs

    Article No. 720763

     

    DICTUM T-Track, 1220 mm

    €19.90

    incl. VAT plus shipping costs

    Article No. 707766

    DICTUM T-Track, 915 mm

    €16.50

    incl. VAT plus shipping costs

    Article No. 707765

    DICTUM T-Track, 610 mm

    €12.90

    incl. VAT plus shipping costs

    Article No. 707764

    Hold Down Clamp for DICTUM T-Track

    €9.90

    incl. VAT plus shipping costs

    Article No. 727341

    PantoRouter for Milling Motors Ø 91,8 mm

    €998.00

    incl. VAT plus shipping costs

    Article No. 720557

    Centering Scale Fence for PantoRouter

    €49.50

    incl. VAT plus shipping costs

    Article No. 720568

    PantoRouter for Milling Motors Ø 43 mm

    €1,029.00

    incl. VAT plus shipping costs

    Article No. 720757

    DICTUM Lever Clamp for Guide Rails

    €29.90

    incl. VAT plus shipping costs

    Article No. 705643

    series
    Anryu Hocho, Santoku, All-purpose Knife
     

    Anryu Hocho, Santoku, All-purpose Knife

    €229.00

    incl. VAT plus shipping costs

    Article No. 719920

    series
    Saji Hocho, Usuba, Vegetable Knife
     

    Saji Hocho, Usuba, Vegetable Knife

    €469.00

    incl. VAT plus shipping costs

    Article No. 719841