Hattori Hold Down Clamp, 100/50 mm
Made of solid aluminium with protective rubber caps at the ends, this hold-down clamp fixes workpieces on routing templates, other devices or worktables. Due to the M8 x 100 threaded rod, the hold-down clamp can also be combined with many MFT accessories. A large star handle allows easy handling. Jaw depth 100/50 mm. Incl. T-bolt M8 x 100 mm, threaded rod M8 x 100 mm, slot nut (width 19/23 mm).
| Article no. | 714711 |
| Brand | Hattori |
Accessories
Knurled Nut for Multifunction Bench Dogs MBH20
The 20 mm centring projection on the knurled nut allows it to be centred quickly and precisely in the holes of the plate. This ensures that the 8 mm thread is always in the middle of the hole and makes it easier to insert and screw on...
€5.20
incl. VAT plus shipping costs
Article No. 728991
DICTUM Self-clamping Connecting Bushing Ø 20 mm, M8
The 18 mm long bushing with internal thread acts as a connector between self-made auxiliary devices, e.g. fences or templates, which are mounted in the hole grid of a workbench or multifunction table. A circumferential rubber O-ring...
€4.90
incl. VAT plus shipping costs
Article No. 729506
Guide Rail, 30 x 600 mm
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions...
€12.90
incl. VAT plus shipping costs
Article No. 714672
Hattori Step Block, 50 x 100 mm
The graduations milled at 10 mm intervals offer precise adjustment possibilities when clamping or setting workpieces for machining. End support for hold-down clamps: The clamping height of many T-slot hold-downs is limited by the...
€15.90
incl. VAT plus shipping costs
Article No. 714710
Suitable for
Guide Rail, 30 x 600 mm
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions...
€12.90
incl. VAT plus shipping costs
Article No. 714672
Guide Rail, 30 x 1220 mm
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions...
€19.50
incl. VAT plus shipping costs
Article No. 714673