DICTUM White Beech Folding Rule
Folding rule made of white beech with 3.4 mm thick segments and hidden, hardened spring steel detent. Millimetre scale on both sides. 100 g. Accuracy class III (+/- 1.4 mm per 2 m).
€3.90
incl. VAT plus shipping costs
Article No. 708034
Depth Setting Gauge for DICTUM Lathe S 175
For mounting on the tailstock. Facilitates precise depth adjustment during drilling. The drilling depth can be limited by the stopper supplied. Scale 0-100 mm. Fits DICTUM Lathe S 175 (No. 707783 , 707847 ).
€39.90
incl. VAT plus shipping costs
Article No. 707789
Mini Try Square
Walnut with brass fitting. Stainless steel blade. With a 45° mitre stop. Accuracy 0.05 mm per 100 mm.
€17.90
incl. VAT plus shipping costs
Article No. 707171
Japanese Mini Try Squares
Small Japanese try square with stainless steel blade and brass stock, ground. Accuracy 0.1 mm per 100 mm.
€9.90
incl. VAT plus shipping costs
Article No. 707274
€8.50
incl. VAT plus shipping costs
Article No. 707255
Shinwa Precision Rules Pickup
Thanks to the upturned right end, this ruler is easy to pick up from smooth surfaces. Matted and deep-etched millimetre scale with large numbers for easy reading.
€3.90
incl. VAT plus shipping costs
Article No. 707840
Shinwa Feeler Gauge
Precise feeler gauge made of rustproof steel for checking distances. 25 blades with a length of 65 mm provide blade thicknesses ranging from 0.03 mm to 1.00 mm.
€19.90
incl. VAT plus shipping costs
Article No. 717544
Profile Gauge with Stainless Steel Pins
With fine stainless steel pins for particularly accurate results. Needle diameter of 0.75 mm. Specified in millimetre.
€12.90
incl. VAT plus shipping costs
Article No. 707167
€14.90
incl. VAT plus shipping costs
Article No. 707176
Analogue Calliper
Bevelled scale in mm and inch for parallax-free reading. Deep-etched stainless steel, slide with 0.05 mm vernier and locking screw.
€24.40
incl. VAT plus shipping costs
Article No. 707303
Shinwa Carpenter's Square
Precision square with millimetre graduations permanently etched on both sides of both edges. Stainless steel. Accuracy 0.1 mm per 100 mm.
€32.80
incl. VAT plus shipping costs
Article No. 717133
Veritas Metric Set-Up Blocks, 9-Piece Set
Ideal for adjusting spaces, e.g. between parallel fences or depths, e.g. when working with circular saws, routers, table routers or drills. Combined with the steel block, the eight different set-up blocks, which are accurate within 0.05...
€53.50
incl. VAT plus shipping costs
Article No. 703854