Sonstige
Products from Sonstige
Buy Sonstige products online at DICTUM.
Edging Calliper
Light and versatile calliper for easy shop measurements of plate-edge thicknesses in range of 0-20 mm with 0.1 mm step.
€17.90
incl. VAT plus shipping costs
Article No. 707094
Fingerboard Pads
For an even distribution of clamping pressure when gluing fingerboards in place. Pads with cork lining to prevent risk of surface damage of the neck. The radiuses of both pads perfectly adjusted to the true radiuses of a violin neck and...
€9.80
incl. VAT plus shipping costs
Article No. 735810
Silicone Protective Pads for Herdim Repair Clamps
High-quality soft silicone pads that are pulled over the movable pressure plate of repair clamps to optimally protect even the most sensitive varnished surfaces from marring. Fits Herdim Repair Clamps and Herdim Hand-Forged Repair Clamps.
€3.30
incl. VAT plus shipping costs
Article No. 820068
Bow Maker‘s Plane, Blade Width 30 mm
An upright 90° positioned blade setup of a wooden plane for uneven hardwoods (pernambuco, ebony). Brass sole, HSS blade for cutting-edge durability.
€58.20
incl. VAT plus shipping costs
Article No. 702525
Modelling Tool
For modelling reliefs as well as stamped borders and patterns on leather. With the spoon tip, you can smooth irregularities on the surface, while the ball tip allows fine details and lines as well as rebates. Ball tip Ø 1.4 mm, spoon...
€9.90
incl. VAT plus shipping costs
Article No. 708438
Kangaroo Leather, Natural
Its use for making football shoes and motorcycle clothing shows how very strong and indestructible this leather is. The skins of wild Australian kangaroos are vegetable-tanned, barrel-dyed, and then milled mechanically. The processing...
€99.90
incl. VAT plus shipping costs
Article No. 831585
Tadafusa Hocho Nashiji, Nakiri - Usuba (vegetable knife)
The forged skin with hammered structure gives the blade an original and rustic appearance. A thermally treated* chestnut wood handle with black plastic ferrule fits the blade. The cutting edge of Blue Paper Steel is perfectly polished...
€129.00
incl. VAT plus shipping costs
Article No. 719941
Fretboard Straight Edge, Guitar
Steel ruler with precisely milled and sanded ruler edge for guitar fret and fretboard straightness detection.
€35.60
incl. VAT plus shipping costs
Article No. 707013
Ichihana Spray Lance with Wide Spread, 285 mm
The curved, oval head creates a full spray with a wide spread, making this lance ideal for watering large areas. The head and spout are soldered drip-tight. Due to the short length and lack of ball valve, the lance is very lightweight...
€59.00
incl. VAT plus shipping costs
Article No. 746203
Flat Steel 1.2235, 80CrV2
Versatile carbon steel with good workability and polishability. Also known as L2 steel. Ideal for a Damascus structure with 1.2842 steel (90MnCrV8). This steel is an excellent choice for outdoor, folding or carving knives. Final hardness...
€6.00
incl. VAT plus shipping costs
Article No. 830926
Mulberry, 300 x 40 x 40 mm
Mediterranean mulberry wood is highly valued for its hardness, durability and polishability. Its appeal lies in its unique golden yellow colour. It is traditionally used to make high-quality stringed instruments. Very good polishability....
€4.60
incl. VAT plus shipping costs
Article No. 832057
European Walnut, 300 x 40 x 40 mm
Walnut is a much sought-after precious wood due to its aesthetic dark brown colour and vivid grain. Its appearance and its medium density makes it ideal for woodturning as well as for making musical instruments, high-grade furniture,...
€2.60
incl. VAT plus shipping costs
Article No. 832016
Plum, 300 x 60 x 60 mm
Plum wood features a striking, in some places very strong reddish to purple-brown shade and is very good to work. Its finely grained and even structure makes it ideal for knife handles as well as woodwind instruments, for carving and...
€18.60
incl. VAT plus shipping costs
Article No. 832033
European Walnut, 150 x 40 x 40 mm
Walnut is a much sought-after precious wood due to its aesthetic dark brown colour and vivid grain. Its appearance and its medium density makes it ideal for woodturning as well as for making musical instruments, high-grade furniture,...
€1.50
incl. VAT plus shipping costs
Article No. 832015
European Walnut, 150 x 150 x 60 mm
Walnut is a much sought-after precious wood due to its aesthetic dark brown colour and vivid grain. Its appearance and its medium density makes it ideal for woodturning as well as for making musical instruments, high-grade furniture,...
€7.10
incl. VAT plus shipping costs
Article No. 832019
Pear, 300 x 40 x 40 mm
The wood of the pear tree shows an even, fine-pored wood structure and is easy to work with. Its striking reddish colour makes it popular for furniture making. Thanks to its fine structure and hardness, it is also suitable for...
€2.60
incl. VAT plus shipping costs
Article No. 832026
Pear, 300 x 60 x 60 mm
The wood of the pear tree shows an even, fine-pored wood structure and is easy to work with. Its striking reddish colour makes it popular for furniture making. Thanks to its fine structure and hardness, it is also suitable for...
€6.00
incl. VAT plus shipping costs
Article No. 832028
€13.50
incl. VAT plus shipping costs
Article No. 700110S
€24.90
(Content: €5.53 / 1 kg)
incl. VAT plus shipping costs
Article No. 832069
Eyelets, Black, Internal Ø 4.0 mm x Shaft Length 7.1 mm,...
Eyelets for riveting leather or Kydex materials. Decorative, and quick and easy to position. Shaft inner diameter: 4.0 mm Shaft length: 7.1 mm Head diameter: 7.4 mm Hole diameter required: 5 mm Overall length: 8.0 mm Maximum material...
€6.90
incl. VAT plus shipping costs
Article No. 720035
Maple, 300 x 40 x 40 mm
The sapwood and heartwood are pale yellow to white. This close-grained wood with low shrinkage is easy to process and mainly used for furniture making and interior fittings. Traditionally, tabletops, stairs and parquet flooring were made...
€2.40
incl. VAT plus shipping costs
Article No. 831996
Maple, 150 x 150 x 60 mm
The sapwood and heartwood are pale yellow to white. This close-grained wood with low shrinkage is easy to process and mainly used for furniture making and interior fittings. Traditionally, tabletops, stairs and parquet flooring were made...
€6.80
incl. VAT plus shipping costs
Article No. 831999
»Sho-Honyama« Japanese Natural Honing/Polishing Stone, Fragment
A very fine grit sediment stone from the Kyoto region. Perfect for removing burr and polishing hand-forged plane blades, chisels and knife blades made of carbon steel. Ground flat on one side.
€29.90
incl. VAT plus shipping costs
Article No. 711567
Taxe der Streichinstrumente, 17. Auflage
This reference volume provides an extensive listing of the estimated values of stringed instruments based on their maker and origin. It is published periodically in Germany with the help of various national and international violin...
€96.00
incl. VAT plus shipping costs
Article No. 714355
Bench Plane, Redwood, Blade Width 30 mm
Ideal for working hardwoods and difficult grain. HSS plane blade with wooden wedge, no chipbreaker. Cutting angle 60°. Plane body made of Indonesian redwood.
€28.20
incl. VAT plus shipping costs
Article No. 703279
European Walnut, 180 x 70 x 70 mm
Walnut is a much sought-after precious wood due to its aesthetic dark brown colour and vivid grain. Its appearance and its medium density makes it ideal for woodturning as well as for making musical instruments, high-grade furniture,...
€9.40
incl. VAT plus shipping costs
Article No. 727859
European Walnut, 450 x 70 x 70 mm
Walnut is a much sought-after precious wood due to its aesthetic dark brown colour and vivid grain. Its appearance and its medium density makes it ideal for woodturning as well as for making musical instruments, high-grade furniture,...
€28.60
incl. VAT plus shipping costs
Article No. 727862
Limewood Blocks, 1st Quality, 300 x 180 x 80 mm
Carvers like nothing better than lime trees. This soft wood has an even, delicate cell structure, which makes the short-grained timber a pleasure to cut and an extremely popular choice for wood carvings, sculptures and turned objects....
€23.90
incl. VAT plus shipping costs
Article No. 831940
Sicilian Olive Wood, 150 x 40 x 40 mm
Slow growing wood of the Sicilian olive tree with attractive grain. Due to its very high density and excellent polishability, it is suitable for making everyday pieces and jewellery of high aesthetic value and wear-resistance. Density...
€5.80
incl. VAT plus shipping costs
Article No. 570694
Naga-Ha Nigiri, Hand-forged
Hand-forged, double-layered steel blade, black gunmetal finish, finely ground edge. Core layer White Paper Steel, not rustproof.
€27.80
incl. VAT plus shipping costs
Article No. 718689
One-handed Edge Clamp
Practical edge clamp for easy application of edging on large workpieces and inside and outside radii. It even makes laminating using templates easy without help from others. The non-slip jaws even remain in contact with ultra-smooth...
€62.30
incl. VAT plus shipping costs
Article No. 705857
Australian Precious Wood, Square Timber, Length 120 mm, Red...
Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.
€19.80
incl. VAT plus shipping costs
Article No. 831330
Slick
Slick for making beam joints and for finishing work. Double-layered, well-proportioned blade with a cutting edge of White Paper Steel. Handle made of Japanese red oak.
€273.00
incl. VAT plus shipping costs
Article No. 710802
Revolving Punch Pliers
For punching leather, cardboard, rubber, plastic etc. Six punches with diameters of 2 / 2.5 / 3 / 3.5 / 4 and 4.5 mm. The diameter is displayed in the view window. Pressed, anti-skid corded steel shanks with stop. 270 g.
€15.90
incl. VAT plus shipping costs
Article No. 711995
€1.40
incl. VAT plus shipping costs
Article No. 730460
Marking Knife »Kogatana« Standard, Left bevel
These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.
€27.90
incl. VAT plus shipping costs
Article No. 710304
€7.90
incl. VAT plus shipping costs
Article No. 719818
€7.80
incl. VAT plus shipping costs
Article No. 830800
Bone Plate, 55 x 18 x 2 mm
For making knife handle scales, inlays, jewellery and as a replacement for elephant ivory. Hard and resistant to wear, easy to sand and finish. Made from thick-walled, sterilized water buffalo bones.
€5.30
incl. VAT plus shipping costs
Article No. 831155
Wooden Case, for 3 Knives
Elegant wooden case with a well-crafted interior featuring knife slots to protect the sensitive cutting edges from damage. Lid decorated with Japanese calligraphy.
€22.50
incl. VAT plus shipping costs
Article No. 705885
Ginkgo Cutting Board
Tough but not too hard, easy on knife cutting edges, good looking and antibacterial, ginkgo is an ideal wood for cutting boards. This solid board is made of non-glued, air-dried Japanese ginkgo, with a planed and untreated surface.
€79.00
incl. VAT plus shipping costs
Article No. 706028
€9.90
incl. VAT plus shipping costs
Article No. 707255
Handiwork Metal 150
Fine saw for non-hardened metals and hard plastics. The rubber handle provides a comfortable and secure grip. Replaceable blade. Can also be used with blade for wood (No. 712716 ).
€18.50
incl. VAT plus shipping costs
Article No. 712715
Japanese Gardening Gloves
These thin, cosy gardening gloves made of finely perforated pigskin facilitate precise control of tools and plants. Inner lined with full-grain leather for better grip, Velcro fastener on cuff. Size M = 7, L = 8, XL = 9-10
€14.90
incl. VAT plus shipping costs
Article No. 707655
Australian Precious Wood, Square Timber, Length 300 mm, Red...
Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.
€47.90
incl. VAT plus shipping costs
Article No. 831120
Filter Paper „Miyoshinogami”, 10-Piece Set
This filter paper is used to filter expensive lacquers before use or after adding pigments, to avoid lumps and impurities in the lacquer later. To use it, you lay several sheets of paper (5-10) on top of each other and pour in the...
€5.40
incl. VAT plus shipping costs
Article No. 716313
Ebony Assortment
Heartwood ranging in colour from jet black to dark and brown striped. A typical selection contains 19 x 19 to 38 x 38 mm squares, 100-160 mm in length. Approx. 10-20 pieces total. All the pieces have waxed ends and are virtually free of...
€106.70
(Content: €23.71 / 1 kg)
incl. VAT plus shipping costs
Article No. 831020
Analogue Calliper
Bevelled scale in mm and inch for parallax-free reading. Deep-etched stainless steel, slide with 0.05 mm vernier and locking screw.
€28.80
incl. VAT plus shipping costs
Article No. 707303