Tormek T-4 Original incl. Adjustable Trueing Tool TT-50

Free workshop voucher included!

Compact and versatile, the Tormek T-4 Original is also a water-cooled sharpening system that,...
NEW! Ultimate precision, solid zinc-cast top
The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal arms for the universal support and the integrated carrying handle are made from one piece of cast zinc. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.
Compact and versatile, the Tormek T-4 Original is also a water-cooled sharpening system that, due to its precision and stability, is suitable for sharpening chisels, knives, scissors, and smaller tools such as carving tools.
Both the vertical and horizontal holders for the universal support and the integrated carrying handle are made of a single piece of die-cast zinc.
The motor and main shaft are mounted on the cast top, forming a solid unit. This solid construction significantly improves accuracy during the sharpening process.
Extensive selection of guides.
Tormek »Original« grinding wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid die-cast zinc top including universal support with fine adjustment (can be used horizontally and vertically). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8.0 kg.
Tormek Sharpening System

Includes:
  • Adjustable trueing tool TT-50 with diamond tip, for trueing ingrained or unround grinding wheels
  • Stone grader (SP-650)
  • Angle gauge (WM-200)
  • Honing compound (PA-70)
  • Handbook (HB-10)
  • Edge marker (EM-15)
  • Voucher for free participation in a one-day workshop of your choice or a discount of €100 on a multi-day workshop
  • Comes with Tormek manual in German language

Tormek Sharpening System
Proven for many years and constantly perfected wet-working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek achieves exact cutting geometry and consistent results on chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of its safe operation - no sparks are produced and it has an overload safety clutch.
The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The front side can also be used for plane honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.

Further advantages:
Longer service life, housing made of sturdy ABS plastic and integrated upper part made of die-cast zinc
Stainless steel spindle with EzyLock-System for easier stone fitting
Solid die-cast zinc housing with integrated vertical and horizontal support
     
    more
    less
    Further details on the manufacturer
    Additional links

    Available downloads:

    Tormek Machine Models
     

    Further information

    Our Services Tips & Tricks Workshops
     
    Exclusively: If you buy a Tormek T-8 or T-4 from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of 100 € on a multi-day workshop. The voucher amount cannot be offset against the purchase of products.
     
    Article no. 716031
    Brand Tormek
    Pre-order now - Article early December 2024 available

    Price advantage

    €493.00 per set

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    Tormek T-4 Original incl. Adjustable Trueing Tool TT-50 Price advantage
      €493.00
     
    Plenty of accessories and spare parts

    Accessories

    Tormek Square Edge Jig SE-77

    Tormek Square Edge Jig SE-77

    For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).
    €69.90

    incl. VAT plus shipping costs

    Article No. 716035

    Tormek Axe Jig SVA-170

    Tormek Axe Jig SVA-170

    For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).
    €16.90

    incl. VAT plus shipping costs

    Article No. 705228

    Tormek Handbook »Water Cooled Sharpening of Edge Tools« (HB 10)

    Tormek Handbook »Water Cooled Sharpening of Edge Tools« (HB 10)

    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek.
    €29.40

    incl. VAT plus shipping costs

    Article No. 705199

    Tormek Universal Support, Extended US-430

    Tormek Universal Support, Extended US-430

    Extended Universal Support for sharpening long tools, such as knives or machetes. Micro adjust with scale for precise setting. Suitable for Tormek T-8, T-7, T-4 and older series models.
    €86.90

    incl. VAT plus shipping costs

    Article No. 716058

    Tormek Planer Blade Jig SVH-320

    Tormek Planer Blade Jig SVH-320

    For blades of any length, minimum blade width 13 mm.
    €184.00

    incl. VAT plus shipping costs

    Article No. 705207

    Tormek Rotating Base

    Tormek Rotating Base

    Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.
    €49.90

    incl. VAT plus shipping costs

    Article No. 705221

    Tormek Tool Rest SVD-110

    Tormek Tool Rest SVD-110

    For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.
    €34.90

    incl. VAT plus shipping costs

    Article No. 705218

    Tormek Rubber Work Mat RM-533

    Tormek Rubber Work Mat RM-533

    This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...
    €52.10

    incl. VAT plus shipping costs

    Article No. 705198

    HR Jig for Wet Grinding Systems, for Stone Width 40 mm

    HR Jig for Wet Grinding Systems, for Stone Width 40 mm

    Keep your knives sharp and ready to use - it is easy with this sharpening guide! This innovative sharpening guide takes your grinding machine to a whole new level of precision and efficiency. Designed for both professional users and...
    variants
    €74.90

    incl. VAT plus shipping costs

    Article No. 714851

    Tormek Moulding Knife Jig SVP-80

    Tormek Moulding Knife Jig SVP-80

    Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models. For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for...
    €177.00

    incl. VAT plus shipping costs

    Article No. 705238

    Tormek Drill Bit Sharpening Attachment DBS-22

    Tormek Drill Bit Sharpening Attachment DBS-22

    Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...
    €229.00

    incl. VAT plus shipping costs

    Article No. 705231

    Tormek Woodturner's Kit TNT-808

    Tormek Woodturner's Kit TNT-808

    Includes: Gouge Jig (SVD-186 R) Multi Jig (SVS-50) Tool Rest (SVD-110) Profiled Leather Honing Wheel (LA-120) Turning Tool Setter (TTS-100) Dust Cover for Tormek Sharpening System (MH-380) Instruction box for woodturners (in...
    €328.00

    incl. VAT plus shipping costs

    Article No. 705454

    Tormek Stone Grader SP-650

    Tormek Stone Grader SP-650

    For regrading and dressing Tormek sharpening stones.
    €28.40

    incl. VAT plus shipping costs

    Article No. 705209

    Tormek Replacement Honing Compound PA-70

    Tormek Replacement Honing Compound PA-70

    The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...
    €15.90

    (Content: €227.14 / 1 kg)

    incl. VAT plus shipping costs

    Article No. 705213

    Tormek Small Knife Holder SVM-00

    Tormek Small Knife Holder SVM-00

    Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.
    €36.20

    incl. VAT plus shipping costs

    Article No. 705232

    Tormek Short Tool Jig SVS-38

    Tormek Short Tool Jig SVS-38

    For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
    €24.50

    incl. VAT plus shipping costs

    Article No. 705239

    Tormek Profiled Leather Honing Wheel LA-120

    Tormek Profiled Leather Honing Wheel LA-120

    For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.
    €56.80

    incl. VAT plus shipping costs

    Article No. 705227

    variants
    €45.00

    incl. VAT plus shipping costs

    Article No. 705203

    Tormek Universal Support US-103 for T-3 and T-4 Original

    Tormek Universal Support US-103 for T-3 and T-4 Original

    With fine adjustment suitable for Tormek T-3, T-4 Original and old series models.
    €44.90

    incl. VAT plus shipping costs

    Article No. 705202

    variants
    €50.90

    incl. VAT plus shipping costs

    Article No. 705197

    Tormek Sharpening Station (TS-740)

    Tormek Sharpening Station (TS-740)

    This robust sharpening station offers not just a sharpening table but also storage space for the Tormek sharpening jigs and accessories. You can adjust the working height to fit your exact size. This allows full control over sharpening,...
    €799.00

    incl. VAT plus shipping costs

    Article No. 705233

    Tormek Bench Grinder Mounting Set BGM-100

    Tormek Bench Grinder Mounting Set BGM-100

    Though primarily designed for turners, this mounting set, in combination with the gouge jig (SVD-186 R), the multi jig (SVS-50) and the tool rest (SVD-110), allows you to sharpen all turning tools with the Tormek system also on a...
    €87.90

    incl. VAT plus shipping costs

    Article No. 705225

    Tormek Turning Tool Setter TTS-100

    Tormek Turning Tool Setter TTS-100

    For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
    €28.20

    incl. VAT plus shipping costs

    Article No. 705237

    DICTUM Japanese Grinding Wheel, Grit 1000

    DICTUM Japanese Grinding Wheel, Grit 1000

    Suitable for HSS as well as carbon steel and double-layered steel. Hard bond for highly effective polishing with little abrasion.
    €149.90

    incl. VAT plus shipping costs

    Article No. 716040

    Tormek Adjustable Trueing Tool TT-50

    Tormek Adjustable Trueing Tool TT-50

    With diamond tip, for trueing ingrained or unround grinding wheels.
    €81.70

    incl. VAT plus shipping costs

    Article No. 705210

    Tormek Scissors Jig SVX-150

    Tormek Scissors Jig SVX-150

    For all straight scissors' blades. Demountable hedge shears up to max. 200 mm. Blade thickness max. 9 mm
    €50.90

    incl. VAT plus shipping costs

    Article No. 705205

    Tormek Multi Jig SVS-50

    Tormek Multi Jig SVS-50

    Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.
    €59.20

    incl. VAT plus shipping costs

    Article No. 705229

    Tormek Converter OWC-1

    Tormek Converter OWC-1

    Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.
    €16.70

    incl. VAT plus shipping costs

    Article No. 705353

    Tormek Gouge Jig SVD-186 R

    Tormek Gouge Jig SVD-186 R

    For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.
    €92.60

    incl. VAT plus shipping costs

    Article No. 716033

     

    Replacement parts

    Tormek Original Replacement Grinding Wheel SG-200, Grit 220

    Tormek Original Replacement Grinding Wheel SG-200, Grit 220

    This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
    €107.00

    incl. VAT plus shipping costs

    Article No. 705196

    Plastic bearing

    Plastic bearing

    Fits No. 705228 , 705236 and 705247 .
    €3.30

    incl. VAT plus shipping costs

    Article No. 800012

    Tormek Settling Disc

    Tormek Settling Disc

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €4.30

    incl. VAT plus shipping costs

    Article No. 800035

    Button Switch for Tormek

    Button Switch for Tormek

    The switch is available in two types - depending on the year the machine was built, as a toggle switch or a button switch. Check whether a toggle switch no. 800046 or a button switch no. 8000504 is installed on your machine. You must...
    €50.90

    incl. VAT plus shipping costs

    Article No. 800504

    Tormek Pro Angle Master WM-200

    Tormek Pro Angle Master WM-200

    For setting the grinding angle and checking the bevel geometry. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €29.30

    incl. VAT plus shipping costs

    Article No. 705240

    variants
    €36.20

    incl. VAT plus shipping costs

    Article No. 800008

    Knurled Nut for Tormek

    Knurled Nut for Tormek

    Fits Tormek T-3, T-4, T-7 and T-8.
    €15.00

    incl. VAT plus shipping costs

    Article No. 800343

    Tormek Eyelet for Cover No. 800040

    Tormek Eyelet for Cover No. 800040

    Suitable for Tormek T-3, T-4, T-7 and old series models.
    €7.60

    incl. VAT plus shipping costs

    Article No. 800042

    Tormek Water Container WB-200

    Tormek Water Container WB-200

    Suitable for Tormek T-3, T-4 and old series models.
    €18.20

    incl. VAT plus shipping costs

    Article No. 705241

    Tormek Diamond Tip ADV D 50

    Tormek Diamond Tip ADV D 50

    For the diamond stone dresser. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €41.90

    incl. VAT plus shipping costs

    Article No. 705217

    Tormek Driving Wheel Safety Lock Pin

    Tormek Driving Wheel Safety Lock Pin

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €3.50

    incl. VAT plus shipping costs

    Article No. 800037

    Tormek Settling Disc

    Tormek Settling Disc

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €17.00

    incl. VAT plus shipping costs

    Article No. 800034

    Tormek Handbook »Nass-Schärfen von Schneidwerkzeugen« (HB 10)

    Tormek Handbook »Nass-Schärfen von Schneidwerkzeugen« (HB 10)

    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek (every machine comes with handbook).
    €29.40

    incl. VAT plus shipping costs

    Article No. 705211

    Tormek Replacement Honing Compound PA-70

    Tormek Replacement Honing Compound PA-70

    The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...
    €15.90

    (Content: €227.14 / 1 kg)

    incl. VAT plus shipping costs

    Article No. 705213

    Knurled Screw fastening Rest for Tormek

    Knurled Screw fastening Rest for Tormek

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €7.10

    incl. VAT plus shipping costs

    Article No. 800041

    Tormek Wedge, Universal Rest

    Tormek Wedge, Universal Rest

    Suitable for Tormek T-3, T-4 and old series models.
    €6.60

    incl. VAT plus shipping costs

    Article No. 800045

    Tormek Universal Support US-103 for T-3 and T-4 Original

    Tormek Universal Support US-103 for T-3 and T-4 Original

    With fine adjustment suitable for Tormek T-3, T-4 Original and old series models.
    €44.90

    incl. VAT plus shipping costs

    Article No. 705202

    variants
    €50.90

    incl. VAT plus shipping costs

    Article No. 705197

    Main Shaft Bearing for Tormek Supergrind 2000 / 1200

    Main Shaft Bearing for Tormek Supergrind 2000 / 1200

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €9.20

    incl. VAT plus shipping costs

    Article No. 800010

    Tormek Horizontal Base XB-100

    Tormek Horizontal Base XB-100

    For Tormek T-7 and T-3.
    €29.40

    incl. VAT plus shipping costs

    Article No. 705226

    Tormek Main Shaft Set MSK-200

    Tormek Main Shaft Set MSK-200

    For easier fitting of the grinding stones the main shaft is now supplied with a left-hand thread. The new EzyLock nut can be tightened by hand and securely clamps the stone. Set consists of main shaft with left-hand thread, EzyLock nut,...
    variants
    €48.70

    incl. VAT plus shipping costs

    Article No. 800501