SPECIAL OFFER: Tormek T-4 Original incl. Jig SE-77 and Square SQ-90

Free workshop voucher included!

Compact and versatile, the Tormek T-4 Original is also a water-cooled sharpening system that,...
SPECIAL OFFER including SE-77 jig and SQ-90 square for free.
Square edge jig SE-77: For plane blades and paring chisels. Also suitable for Japanese chisels. Two adjustment wheels allow for sharpening slightly convex cutting edges.
Compact and versatile, the Tormek T-4 Original is also a water-cooled sharpening system that, due to its precision and stability, is suitable for sharpening chisels, knives, scissors, and smaller tools such as carving tools.
Both the vertical and horizontal holders for the universal support and the integrated carrying handle are made of a single piece of die-cast zinc.
The motor and main shaft are mounted on the cast top, forming a solid unit. This solid construction significantly improves accuracy during the sharpening process.
Extensive selection of guides.
Tormek »Original« grinding wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid die-cast zinc top including universal support with fine adjustment (can be used horizontally and vertically). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.

Includes:
  • Square edge jig (SE-77)
  • Square (SQ-90)
  • Stone grader (SP-650)
  • Pro Angle Master (WM-200)
  • Honing Compound (PA-70)
  • Handbook (HB-10)
  • Edge marker (EM-15)
  • Voucher for free participation on a one-day workshop of your choice or a discount of €100 off a multi-day workshop

Tormek Sharpening System
Proven for many years and constantly perfected wet-working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables the achievement of exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of its safe operation - no sparks are produced and it has an overload safety clutch.
The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The front end can also be used for plane honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and sliding water container.

Further advantages:
< br>Longer service life, housing made of sturdy ABS plastic and integrated upper part made of die-cast zinc
Stainless steel spindle with EzyLock-System for easier stone fitting
Solid die-cast zinc housing with integrated vertical and horizontal support
     
    more
    less
    Further details on the manufacturer
     
    Exclusively at DICTUM: If you buy a Tormek T-8 or T-4 from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of 100 € on a multi-day workshop. The voucher amount cannot be offset against the purchase of products.
     
    Article no. 708886
    Brand Tormek
    Ready to ship, delivery time 3-4 workdays within Germany
    €439.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Plenty of accessories and spare parts

    Accessories

    Tormek Square Edge Jig SE-77

    Tormek Square Edge Jig SE-77

    For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).
    €69.90

    incl. VAT plus shipping costs

    Article No. 716035

    Tormek Axe Jig SVA-170

    Tormek Axe Jig SVA-170

    For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).
    €16.90

    incl. VAT plus shipping costs

    Article No. 705228

    Tormek Handbook »Water Cooled Sharpening of Edge Tools« (HB 10)

    Tormek Handbook »Water Cooled Sharpening of Edge Tools« (HB 10)

    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek.
    €29.40

    incl. VAT plus shipping costs

    Article No. 705199

    Tormek Universal Support, Extended US-430

    Tormek Universal Support, Extended US-430

    Extended Universal Support for sharpening long tools, such as knives or machetes. Micro adjust with scale for precise setting. Suitable for Tormek T-8, T-7, T-4 and older series models.
    €86.90

    incl. VAT plus shipping costs

    Article No. 716058

    Tormek Planer Blade Jig SVH-320

    Tormek Planer Blade Jig SVH-320

    For blades of any length, minimum blade width 13 mm.
    €184.00

    incl. VAT plus shipping costs

    Article No. 705207

    Tormek Rotating Base

    Tormek Rotating Base

    Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.
    €49.90

    incl. VAT plus shipping costs

    Article No. 705221

    Tormek Tool Rest SVD-110

    Tormek Tool Rest SVD-110

    For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.
    €34.90

    incl. VAT plus shipping costs

    Article No. 705218

    Tormek Rubber Work Mat RM-533

    Tormek Rubber Work Mat RM-533

    This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...
    €52.10

    incl. VAT plus shipping costs

    Article No. 705198

    Tormek Moulding Knife Jig SVP-80

    Tormek Moulding Knife Jig SVP-80

    Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models. For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for...
    €177.00

    incl. VAT plus shipping costs

    Article No. 705238

    Tormek Drill Bit Sharpening Attachment DBS-22

    Tormek Drill Bit Sharpening Attachment DBS-22

    Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...
    €229.00

    incl. VAT plus shipping costs

    Article No. 705231

    Tormek Woodturner's Kit TNT-808

    Tormek Woodturner's Kit TNT-808

    Includes: Gouge Jig (SVD-186 R) Multi Jig (SVS-50) Tool Rest (SVD-110) Profiled Leather Honing Wheel (LA-120) Turning Tool Setter (TTS-100) Dust Cover for Tormek Sharpening System (MH-380) Instruction box for woodturners (in...
    €328.00

    incl. VAT plus shipping costs

    Article No. 705454

    Tormek Stone Grader SP-650

    Tormek Stone Grader SP-650

    For regrading and dressing Tormek sharpening stones.
    €28.40

    incl. VAT plus shipping costs

    Article No. 705209

    Tormek Replacement Honing Compound PA-70

    Tormek Replacement Honing Compound PA-70

    The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...
    €15.90

    (Content: €227.14 / 1 kg)

    incl. VAT plus shipping costs

    Article No. 705213

    Tormek Small Knife Holder SVM-00

    Tormek Small Knife Holder SVM-00

    Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.
    €36.20

    incl. VAT plus shipping costs

    Article No. 705232

    Tormek Short Tool Jig SVS-38

    Tormek Short Tool Jig SVS-38

    For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
    €24.50

    incl. VAT plus shipping costs

    Article No. 705239

    Tormek Profiled Leather Honing Wheel LA-120

    Tormek Profiled Leather Honing Wheel LA-120

    For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.
    €56.80

    incl. VAT plus shipping costs

    Article No. 705227

    variants
    €45.00

    incl. VAT plus shipping costs

    Article No. 705203

    Tormek Universal Support US-103 for T-3 and T-4 Original

    Tormek Universal Support US-103 for T-3 and T-4 Original

    With fine adjustment suitable for Tormek T-3, T-4 Original and old series models.
    €44.90

    incl. VAT plus shipping costs

    Article No. 705202

    variants
    €50.90

    incl. VAT plus shipping costs

    Article No. 705197

    Tormek Sharpening Station (TS-740)

    Tormek Sharpening Station (TS-740)

    This robust sharpening station offers not just a sharpening table but also storage space for the Tormek sharpening jigs and accessories. You can adjust the working height to fit your exact size. This allows full control over sharpening,...
    €799.00

    incl. VAT plus shipping costs

    Article No. 705233

    Tormek Bench Grinder Mounting Set BGM-100

    Tormek Bench Grinder Mounting Set BGM-100

    Though primarily designed for turners, this mounting set, in combination with the gouge jig (SVD-186 R), the multi jig (SVS-50) and the tool rest (SVD-110), allows you to sharpen all turning tools with the Tormek system also on a...
    €87.90

    incl. VAT plus shipping costs

    Article No. 705225

    Tormek Turning Tool Setter TTS-100

    Tormek Turning Tool Setter TTS-100

    For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
    €28.20

    incl. VAT plus shipping costs

    Article No. 705237

    DICTUM Japanese Grinding Wheel, Grit 1000

    DICTUM Japanese Grinding Wheel, Grit 1000

    Suitable for HSS as well as carbon steel and double-layered steel. Hard bond for highly effective polishing with little abrasion.
    €149.90

    incl. VAT plus shipping costs

    Article No. 716040

    Tormek Adjustable Trueing Tool TT-50

    Tormek Adjustable Trueing Tool TT-50

    With diamond tip, for trueing ingrained or unround grinding wheels.
    €81.70

    incl. VAT plus shipping costs

    Article No. 705210

    Tormek Scissors Jig SVX-150

    Tormek Scissors Jig SVX-150

    For all straight scissors' blades. Demountable hedge shears up to max. 200 mm. Blade thickness max. 9 mm
    €50.90

    incl. VAT plus shipping costs

    Article No. 705205

    Tormek Multi Jig SVS-50

    Tormek Multi Jig SVS-50

    Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.
    €59.20

    incl. VAT plus shipping costs

    Article No. 705229

    Tormek Converter OWC-1

    Tormek Converter OWC-1

    Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.
    €16.70

    incl. VAT plus shipping costs

    Article No. 705353

    Tormek Gouge Jig SVD-186 R

    Tormek Gouge Jig SVD-186 R

    For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.
    €92.60

    incl. VAT plus shipping costs

    Article No. 716033