Countersinks and countersink drills

Star-M Adjustable Countersink Drills, Conical, 7-Piece Set

Star-M Adjustable Countersink Drills, Conical, 7-Piece Set

The pre-drilling of wood screws takes on a different quality with this countersink drill. Greater tensile strength is achieved with the tapered design than with cylinder drills; at the same time the risk of screw breakage is reduced. The...
€98.00

incl. VAT plus shipping costs

Article No. 717327

90° Countersink with Bit Holder, 7-Piece Set

90° Countersink with Bit Holder, 7-Piece Set

These HSS countersinks with three blades are suited for steel as well as light metal, for plastic as well as wood. The hexagonal shaft allows safe clamping without slippage and also insertion into quick-change bit holders. Comes in metal...
€61.70

incl. VAT plus shipping costs

Article No. 707469

Fisch Pilot Drill

Fisch Pilot Drill

With this pilot drill, you do not have to change bits from drill to countersink when drilling screw holes. You can set the depth of the hole without countersink to between 10 and 45 mm with a grub screw. The hexagonal shank prevents the...
€13.70

incl. VAT plus shipping costs

Article No. 707408

Fisch 90° Countersink, Ø 12.4 mm

Fisch 90° Countersink, Ø 12.4 mm

For sinking countersunk head screws, for countersinking and deburring boreholes in wood, non-ferrous metals, alloyed, and unalloyed steels. These 3-flute HSS countersinks are chatter-free and stand out for low heat build up, excellent...
€18.60

incl. VAT plus shipping costs

Article No. 707374

Lie-Nielsen Countersink 82°

Lie-Nielsen Countersink 82°

For countersinking screws as well as countersinking and deburring holes in wood. Excellent chip removal and high surface quality. American cherry handle, brass ferrule.
€94.90

incl. VAT plus shipping costs

Article No. 920446

Star-M Countersink Drills, 2-Piece Set, HSS, Ø 3 x 9 mm

Star-M Countersink Drills, 2-Piece Set, HSS

Japanese precision tools for countersinking and capping wood screws. Pre-cutter length 20 mm, max. plug length 25 mm. Made of heat-proof, wear-resistant HSS. Hexagonal shaft.
variants
€54.80

incl. VAT plus shipping costs

Article No. 701871

Star-M Countersink Drills, 2-Piece Set, Standard, Ø 3 x 8 mm

Star-M Countersink Drills, 2-Piece Set, Standard

Japanese precision tools for countersinking and capping wood screws. Pre-cutter length 20 mm, max. plug length 25 mm. Made of unalloyed carbon steel. Hexagonal shaft.
variants
€32.20

incl. VAT plus shipping costs

Article No. 701873

Fisch Wood Twist-Drill Bits with Add-on HSS Counterbore, Ø 3 mm

Fisch Wood Twist-Drill Bits with Add-on HSS Counterbore

For drilling pilot holes for screws and countersinking screw heads in one go. You can set the depth of the hole without countersink with a grub screw. Add-on counterbore of heat-resistant, hard-wearing HSS, wood twist-drill bit of tool...
variants
€13.00

incl. VAT plus shipping costs

Article No. 707590

Replacement Bit for Zenterfix, Self-centering Hinge Drilling Bit, 2.0 x 50 mm

Replacement Bit for Zenterfix, Self-centering Hinge Drilling Bit

Important note: Owing to a model change in early 2021, replacement bits for Zenterfix self-centering hinge drilling bits are available in two lengths. Please check the length of the replacement bit you require before placing your order.
variants
€1.90

incl. VAT plus shipping costs

Article No. 746250

Piloted Counterbore, HSS, DIN 373, Ø 6 mm

Piloted Counterbore, HSS, DIN 373

Piloted counterbore for countersinking cap screws. The smooth shank serves as a guide in the drill hole and the cutting diameter indicates the size of the cut for head screw and head. Ideal for the use of Corby rivets. Shaft diameter 5 mm.
variants
€16.60

incl. VAT plus shipping costs

Article No. 729597

Fisch HSS Crosshole Countersink, Hex Shaft, Ø 5-13 mm

Fisch HSS Crosshole Countersink, Hex Shaft

This 90° crosshole countersink for wood, soft metals but also plastics is ideal for flawless countersinking. The crosshole provides excellent chip clearance and prevents jamming with the workpiece. The special edge geometry of these...
variants
€32.10

incl. VAT plus shipping costs

Article No. 708935

Fisch HSS Crosshole Countersink, Round Shaft, Ø 5-10 mm

Fisch HSS Crosshole Countersink, Round Shaft

This 90° HSS-E (C05) crosshole countersink for wood, soft metals but also plastics is ideal for flawless countersinking. The crosshole provides excellent chip clearance and prevents jamming with the workpiece. The special edge geometry...
variants
€20.60

incl. VAT plus shipping costs

Article No. 708937

€2.10

incl. VAT plus shipping costs

Article No. 707573

Fisch Professional Drill Bits, 16-Piece Set

Fisch Professional Drill Bits, 16-Piece Set

Premium quality bit set for quick and easy tool change for predrilling, countersinking and screwing PZ and Torx screws. Set includes HSS wood twist drill and HSS countersink for professional use. Supplied in a sturdy nylon case with belt...
€98.80

incl. VAT plus shipping costs

Article No. 745051

Zenterfix, Self-centring Hinge Drilling Bit, Ø 2 mm

Zenterfix, Self-centring Hinge Drilling Bits

The spring-loaded guide bush is inserted into the screw hole of a hinge or fitting. This automatically centres the HSS core bit in the screw hole. In no time at all you have an accurately centred core hole, which allows you to fasten all...
variants
€20.90

incl. VAT plus shipping costs

Article No. 706230