DICTUM Sharpening Device for BS 50-55
The precisely milled cross slide allows the arm to be moved in two directions at the same time in one operation. Almost all common jigs, e.g. for straight cutting edges, gouges, grinding tables, etc., can be attached and quickly...
€129.00
incl. VAT plus shipping costs
Article No. 729398
DICTUM Sharpening Device for Convex Bevels
Sharpening knives with convex bevels, as is often the case with outdoor or bushcraft knives, is usually only possible by hand. The additional belt guide roller of the BS 50/55 Belt Grinding Device (No. 711284 ) guides the belt in a...
€69.00
incl. VAT plus shipping costs
Article No. 729794
DICTUM Mounting Base for Sharpening Device for Convex Bevels
Used as a connecting link between the Sharpening Device for Convex Bevels (No. 729794 ) and the Belt Grinding Device BS 50/55 (No. 711284 ).
€13.90
incl. VAT plus shipping costs
Article No. 729795
Clamping Flange, Pair, Bore 12.7 mm (½ Inch)
Made of 3 mm galvanised sheet steel. Outer diameter 60 mm. Fits double-wheeled grinders with 12.7 mm shaft.
€2.90
incl. VAT plus shipping costs
Article No. 830419
Oneway Wolverine Sharpening System, Basic Set
The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base...
€89.20
incl. VAT plus shipping costs
Article No. 702170
Oneway Wolverine Sharpening System, Vari Grind
The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base...
€53.00
incl. VAT plus shipping costs
Article No. 702171
Grinding Rest for Looking-through Grinding Machine
Suitable grinding rest for looking-through grinding machine. Stable and precise construction Angle adjustment with scale -90° to +90° Height adjustable and rotating Tool and hand rest in one Can be retrofitted with a few simple steps...
€138.00
incl. VAT plus shipping costs
Article No. 706958
LED Precision Optics
Precision optics with 3 dioptres (1.75x magnification), real glass lense, adjustable LED light and lens cover. Additional hinge allows the lamp head with 125 mm optical glass and 90 LEDs to be pivoted independently of the gooseneck...
€139.00
incl. VAT plus shipping costs
Article No. 720583
Clamping Sleeve for Adaptor Flange
For mounting CBN grinding wheels Ø 150 mm e.g. on Low-speed Grinder DS 150 L (No. 720782 ). By means of this sleeve, the adaptor flange for CBN grinding wheels can be conveniently clamped to the machine shaft. The clamping sleeve bridges...
€5.10
incl. VAT plus shipping costs
Article No. 707837
Flexible Shaft for DICTUM Mini Double-wheeled Grinder DS 75
Retrofit kit for DICTUM Mini Double-wheeled Grinder DS 75 (No. 728793 ). Shaft length 92 cm.
€9.90
incl. VAT plus shipping costs
Article No. 728796
Flexible Shaft for DICTUM Mini Polishing Motor PM 75
Retrofit kit for DICTUM Mini Polishing Motor PM 75 (No. 728794 ). Shaft length 92 cm.
€24.90
incl. VAT plus shipping costs
Article No. 728797
Polishing Disc Mount, Tapered, Pair
The tapered thread makes it possible to clamp polishing discs with bore diameter 3-13 mm. For machine shafts with diameter 10 mm. Overall length 92 mm.
€10.60
incl. VAT plus shipping costs
Article No. 728798
Holding Arbors with Clamping Flanges, Pair
One left-hand and one "right-hand holding arbor with two flange discs each. For clamping polishing and grinding discs. Arbor diameter 10 mm x 35 mm. For machine shafts with diameter 10 mm.
€9.90
incl. VAT plus shipping costs
Article No. 728800
Holding Arbors, Pair
One left-hand and one right-hand holding arbor each, incl. clamping nut. For clamping polishing and grinding discs, grinding rollers, etc. Arbor diameter 10 mm x 63 mm. For machine shafts with diameter 10 mm.
€13.40
incl. VAT plus shipping costs
Article No. 728801
Grinding Roller
For mounting on the right-hand shaft of the polishing motor. Laminated rubber roller with holding arbor. Incl. sanding sleeves. For machine shafts with diameter 10 mm.
€14.90
incl. VAT plus shipping costs
Article No. 728802
Sanding Sleeve, Ø 50 mm
Fits grinding roller for DICTUM Mini Polishing Motor (No. 728802 ). Sleeve length 50 mm.
€0.90
incl. VAT plus shipping costs
Article No. 728803
Circular Brush
Pointed 3-row circular brush with plastic core. For pre- and post-polishing. For tapered polishing disc mounts.
€3.90
incl. VAT plus shipping costs
Article No. 728808
DICTUM Universal Handpiece HD-6.5
Handpiece with three-jaw chuck in particularly resilient design for rough work with the bending shaft, large milling, drilling or grinding tools. Max. speed 8500 rpm. Clamping range 1-6.5 mm. Comes with chuck key.
€25.90
incl. VAT plus shipping costs
Article No. 728809
DICTUM Universal Handpiece UH-6
Three-jaw chuck for milling, drilling or grinding work with the bending shaft. Max. speed 20 000 rpm. Clamping range 1-6 mm. Comes with chuck key.
€24.90
incl. VAT plus shipping costs
Article No. 728810
DICTUM Universal Handpiece UH-4
Three-jaw chuck for milling, drilling or grinding work with the bending shaft. Max. speed 20 000 rpm. Clamping range 1-4 mm. Comes with chuck key.
€19.90
incl. VAT plus shipping costs
Article No. 728811
Replacement Carbon Brushes for Mini Double-wheeled Grinder and...
Fits DICTUM Mini Double-wheeled Grinder (No. 728792 , 728793 ) and DICTUM Mini Polishing Motor (No. 728794 , 728795 ).
€2.70
incl. VAT plus shipping costs
Article No. 728813
DICTUM Flexible Shaft with Gear Rim Drill Chuck
Work flexibly and effectively in hard-to-reach places - no problem with the flexible shaft with a total length of 130 cm. A large handle with hand guard safely covers the rotating drill chuck and provides a good grip. Shaft tools such as...
€32.10
incl. VAT plus shipping costs
Article No. 728820
Splash Guard for DICTUM Mini Polishing Motor PM 75
Thanks to the high speeds of polishing motors, fibres of the polishing discs and polishing paste are spun away. The sheet steel housing with folding splash guard prevents contamination on workbenches or walls. A must for work outside...
€42.60
incl. VAT plus shipping costs
Article No. 728822
Scroll Chuck 6.5 mm
For mounting on the right-hand shaft. Comes with chuck key. For machine shafts with diameter 10 mm. Clamping range 1-6.5 mm.
€12.90
incl. VAT plus shipping costs
Article No. 728799
Reducer Rings, Pair
For reducing the bore diameter of grinding and polishing wheels. Made of plastic.
€2.00
incl. VAT plus shipping costs
Article No. 729027
DICTUM Short Tool Jig SW-36
For short carving blades, hollow gouges and V-parting tools or small woodturning gouges A plastic cap on the pressure screw avoids pressure marks on the tools. Clamping width max. 36 mm.
€15.50
incl. VAT plus shipping costs
Article No. 721041
DICTUM Universal Tool Rest STU-110
Support table for sharpening flat cutting edges such as flat chisels and scraper blades, parting tools and inshaves. The 107 x 88 mm support enables a wide range of tools to be guided safely. Suitable for sharpening machines with guide...
€17.90
incl. VAT plus shipping costs
Article No. 721044
CBN Grinding Pin Ø 15 mm, B126
The cylindrical shape of this CBN grinding pin is ideal for grinding bore holes, radii and contours, and for resharpening carving and hook knives by hand with a flexible shaft or drill. CBN coating around the circumference and on the...
€12.90
incl. VAT plus shipping costs
Article No. 704942
Grinding Disc
For mounting on the right-hand shaft of the polishing motor. Velcro disc with mandrel. For machine shafts with diameter 10 mm.
€7.90
incl. VAT plus shipping costs
Article No. 728804
€2.30
incl. VAT plus shipping costs
Article No. 729775
€6.90
incl. VAT plus shipping costs
Article No. 729454
Werkzeugauflage für DICTUM Doppelschleifer DS 150 S
Fits Double-wheeled Grinder DS 150 S (No. 720795 ). Incl. mounting screws.
€9.30
incl. VAT plus shipping costs
Article No. 830407
Werkzeugauflage für DICTUM Langsamläufer DS 150 L
Suitable for Low-speed Grinder DS 150 L (No. 720782 ). Incl. mounting screws.
€9.30
incl. VAT plus shipping costs
Article No. 830415
Sichtschutz, Set
Protective screen without magnifying glass. Incl. mounting screws. Fits Low-speed Grinder DS 150 L (No. 720782 ) and Double-wheeled grinder DS 150 S (No. 720795 ).
€4.90
incl. VAT plus shipping costs
Article No. 830418
Base Plate for DICTUM Double-wheeled Grinder
Matching base plate to connect the Wolverine sharpening system to the DICTUM Low-speed Grinder DS 150 L. The Oneway Wolverine sharpening system (No. 702170 ) was specially developed for sharpening woodturning tools. On double-wheeled...
€39.90
incl. VAT plus shipping costs
Article No. 731699
Hattori Angle Jig for Chisels and Plane Blades
Gauge with 14 angles for checking tool cutting edges. The sizes of the angle notches are particularly suitable for chisels and plane blades. An engineer's corner at the base of each slot ensures full contact when checking a bevel and...
€28.90
incl. VAT plus shipping costs
Article No. 714676
DICTUM Plane Blade Jig SHV-77
This variable grinding jig for plane blades up to max. 77 mm width can be tilted +/- 5° by means of additional adjusting screws. This allows plane blades to be fixed and sharpened at precise angles. By turning back both adjusting screws,...
€39.90
incl. VAT plus shipping costs
Article No. 721051
Adaptor Flange with Precision Disc, Bore 12.7 mm
The flange reduces the 32 mm standard bore of the grinding wheels to the 12.7 shaft diameter. It ensures an extremely smooth-running wheel in both axial and radial directions, and even better grinding results. Made in steel.
€12.90
incl. VAT plus shipping costs
Article No. 820908
DICTUM Universal Jig 90° SU-77
For straight cutting edges such as plane blades, chisels and paring chisels. A fence aligns the clamped blades at a 90° angle. Clamping width max. 77 mm. Suitable for sharpening machines with guide rod diameter 12 mm.
€24.30
incl. VAT plus shipping costs
Article No. 721037
Water Deflector for DICTUM Water-cooled Grinder
The water deflector has two magnets and is simply attached to the side plate of the wet grinding machine. Dripping water that falls onto the housing, especially when processing wide blades, is thus drained off via the side plate into the...
€16.90
incl. VAT plus shipping costs
Article No. 714570
€12.90
incl. VAT plus shipping costs
Article No. 714579
Star Knob for DICTUM Water-cooled Grinder
Low-shaped star knob. Brass insert with M12 thread. Fits DICTUM Water-cooled Grinder No. 707799 .
€6.90
incl. VAT plus shipping costs
Article No. 714571
Rubberised Magnet for Water Container
This magnet with rubber coat can be put into the water container of any water-cooled grinder. The removed metal particles adhere to the magnet and thus no longer contaminate the cooling water. The magnet can then be easily removed from...
€4.90
incl. VAT plus shipping costs
Article No. 714569
Plastic Bearing for DICTUM Water-cooled Grinder
Plain bearing with collar, internal/external diameter 15/21 mm, length 10 mm. Fits DICTUM Water-cooled Grinder No. 707799 .
€1.90
incl. VAT plus shipping costs
Article No. 714561
Internal Clamping Flange for DICTUM Water-cooled Grinder
This clamping flange is fitted behind the grinding wheel of the DICTUM Water-cooled Grinder (No. 707799 ). Internal/external diameter 12/50 mm.
€19.50
incl. VAT plus shipping costs
Article No. 714568
External Clamping Flange for DICTUM Water-cooled Grinder
This clamping flange is placed on the grinding wheel on the DICTUM Water-cooled Grinder (No. 707799 ). It distributes the contact pressure of the knurled nut. Internal/external diameter 12/50 mm.
€12.90
incl. VAT plus shipping costs
Article No. 830595
Knurled Nut for DICTUM Water-cooled Grinder
Knurled nut with M12 left-hand thread for pressing the grinding wheel to the DICTUM Water-cooled Grinder No. 707799 .
€14.90
incl. VAT plus shipping costs
Article No. 729527
Water Container for DICTUM Water-cooled Grinder
Plastic water container for hanging on the side plate of the DICTUM Water-cooled Grinder No. 707799 .
€14.90
incl. VAT plus shipping costs
Article No. 830583