Clamping Sleeve for Adaptor Flange
For mounting CBN grinding wheels Ø 150 mm e.g. on Low-speed Grinder DS 150 L (No. 720782). By means of this sleeve, the adaptor flange for CBN grinding wheels can be conveniently clamped to the machine shaft. The clamping sleeve bridges the distance from the clamping nut to the adaptor flange. Length 20 mm.
- Centre hole 12.7 mm
| Article no. | 707837 |
| Brand | - |
Suitable for
DICTUM Low-speed Grinder DS 150 L
Low-speed grinder: due to a speed of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually operate with 3000 rpm Wheel width 40 mm, an unbeatable advantage, especially when...
€235.00
incl. VAT plus shipping costs
Article No. 720782
DICTUM Low-speed Grinder DS 150 L with DICTUM CBN Grinding Wheel
Low-speed grinder: due to a speed of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually have a speed range of more than 3000 rpm Wheel width 40 mm, an unbeatable advantage,...
€399.00
incl. VAT plus shipping costs
Article No. 711241
Sharpening Set Woodturning + DICTUM Low-speed Grinder DS 150 L...
This set gives you all you need for sharpening turning tools. The low-speed DICTUM grinder DS 150 L (No. 720782 ) for cool grinding ideally complements the Wolverine sharpening system which consists of the Basic Set (No. 702170 ) and...
€512.00
incl. VAT plus shipping costs
Article No. 711243
DICTUM CBN Grinding Wheel Black Crystal, Ø 150 mm, One Side...
With the CBN grinding wheels you can sharpen even HSS (also powder metallurgically produced) and hardened steel on the slowly running double grinder without the risk of the steel getting too hot. A special process allows grinding without...
€179.00
incl. VAT plus shipping costs
Article No. 715287
DICTUM CBN Grinding Wheel Black Crystal, Ø 150 mm, One Side...
With the CBN grinding wheels you can sharpen even HSS (also powder metallurgically produced) and hardened steel on the slowly running double grinder without the risk of the steel getting too hot. A special process allows grinding without...
€179.00
incl. VAT plus shipping costs
Article No. 715288
DICTUM CBN Grinding Wheel Black Crystal, Ø 150 mm, One Side...
With the CBN grinding wheels you can sharpen even HSS (also powder metallurgically produced) and hardened steel on the slowly running double grinder without the risk of the steel getting too hot. A special process allows grinding without...
€179.00
incl. VAT plus shipping costs
Article No. 715289
DICTUM Low-speed Grinder DS 150 L incl. Belt Grinding Device...
Low-speed grinder: Due to a speed of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually have a speed range of more than 3000 rpm Disc width 40 mm: an unbeatable advantage,...
€345.00
incl. VAT plus shipping costs
Article No. 711259