System tools and hollowing tools

2 of 2
Crown Revolution Adapter

Crown Revolution Adapter

Fits No. 702048 , 702208 and 702209 . Inside diameter 13 mm. Outside diameter 16 mm.
€30.60

incl. VAT plus shipping costs

Article No. 800432

Crown Tungsten Extreme Deep Hollowing Tool, XXL

Crown Tungsten Extreme Deep Hollowing Tool, XXL

Easy-to-handle, lightweight yet very robust tool for removing large quantities of material from deep hollow bodies. The structure of the rectangular, high-edged shaft cross section was inspired by the geometry of beams in structural...
€114.90

incl. VAT plus shipping costs

Article No. 720890

Crown Tungsten Extreme Carbide Tool, Rounded Square

Crown Tungsten Extreme Carbide Tool

These tools make it possible to perform the work that is traditionally done by means of a roughing-out gouge, spindle gouge, chisel, bowl gouge and scraper. Easy-to-handle, lightweight yet very robust tool for removing large quantities...
variants
€109.00

incl. VAT plus shipping costs

Article No. 720888

€19.90

incl. VAT plus shipping costs

Article No. 720891

€19.90

incl. VAT plus shipping costs

Article No. 720892

€19.90

incl. VAT plus shipping costs

Article No. 720893

€24.90

incl. VAT plus shipping costs

Article No. 720894

Crown Cryogenic Hollowing Tool

Crown Cryogenic Hollowing Tool

Hollowing tool for fine finishing. The probe is well-suited for hard woods, for cutting grooves and sharp undercuts as well as making delicate cuts, while the included scrapers are used for finishing already cut surfaces. All cutters are...
€58.90

incl. VAT plus shipping costs

Article No. 702049

Munro Tool Wundercutt 10

Munro Tool

A perfect tool to create large and deep hollow forms. The Jumbo and Wundercutt 10 are equipped with a depth gauge, a cutting wheel and mountable joints. The joints allow an optimal cutting head adjustment, no matter if you are right- or...
variants
€269.00

incl. VAT plus shipping costs

Article No. 728958

€60.80

incl. VAT plus shipping costs

Article No. 728965

Sorby Captive Ring Tool, 5-piece Set

Sorby Captive Ring Tool, 5-piece Set

Easy-to-use tool for the production of loose and captured rings with different diameters. The set contains four interchangeable ring cutters (4.8 / 6.3 / 9.5 / 12.7 mm), which can also be mounted at an angle on the tool carrier for work...
€69.90

incl. VAT plus shipping costs

Article No. 701729

Crown Fat Key Cutter

Crown Fat Key Cutter

Compatible with the Crown Cryo Turning Tool or Crown (Mini) Revolution. Cryogenically hardened M2-HSS.
€21.30

incl. VAT plus shipping costs

Article No. 702069

Wiedemann Universal Tool Holder with Handle Ø 16 mm, bore diameter 10 mm

Wiedemann Universal Tool Holder with Handle Ø 16 mm, bore...

Universal tool holder for hollowing tools with shaft diameter 10 mm. Bore 10 mm. Overall length 565 mm.
€44.80

incl. VAT plus shipping costs

Article No. 702376

€17.80

incl. VAT plus shipping costs

Article No. 728959

€4.90

incl. VAT plus shipping costs

Article No. 728960

€19.90

incl. VAT plus shipping costs

Article No. 728962

€17.80

incl. VAT plus shipping costs

Article No. 728963

€19.90

incl. VAT plus shipping costs

Article No. 728964

Jimmy Clewes Adapter Ø 12.7 mm for Tool Holder No.  720047

Jimmy Clewes Adapter Ø 12.7 mm for Tool Holder No. 720047

Fits tool holder no. 720047 . Reduces the shank diameter from 15.9 mm to 12.7 mm.
€26.50

incl. VAT plus shipping costs

Article No. 720049

Jimmy Clewes Tool Holder, Quick Release, Ø 15.9 mm

Jimmy Clewes Tool Holder, Quick Release, Ø 15.9 mm

Fits Jimmy Clewes Hollowing Tools (No. 720048 ) and all steels with Ø 15.9 mm (⅝ inch) tang. The turning tools are fixed quickly, easily and securely in the anodised aluminium tool holder by the Quick Release fastener. Optionally, the...
€57.80

incl. VAT plus shipping costs

Article No. 720047

Oneway Sure-Grip Handle, 450 mm

Oneway Sure-Grip Handle, 450 mm

Developed by Canadian woodturner Michael Hosaluk. These heavy-duty handles with stainless steel core and two fixing screws fit comfortably in the hand and allow tools to be changed quickly. Bore ½ inch (12.7 mm) and ⅝ inch (15.9 mm)....
€57.50

incl. VAT plus shipping costs

Article No. 729647

Crown Tungsten Extreme Pen Size Carbide Tool, Diamond

Crown Tungsten Extreme Pen Size Carbide Tool

These tools enable easy working and can therefore also be used by beginners without any problems. Ideal for turning pens, intricate woodturning or small boxes. The carbide cutters have a long service life, even with abrasive materials...
variants
€59.90

incl. VAT plus shipping costs

Article No. 729659

€16.90

incl. VAT plus shipping costs

Article No. 729665

€15.40

incl. VAT plus shipping costs

Article No. 729666

€15.40

incl. VAT plus shipping costs

Article No. 729667

Martel Hook Tool, Set with Oneway Sure-Grip Handle

Martel Hook Tool, Set with Oneway Sure-Grip Handle

Martel hook tools size 1 and size 2 (No. 729637 and 729638 ) with matching shanks no. 1 and no. 2 (No. 729641 and 729642 ) and Oneway Sure-Grip handle with changing bores (No. 729647 ). For diameters up to 300 mm.
€234.00

incl. VAT plus shipping costs

Article No. 729651

Kelton Mc Naughton System M8 Standard, Shaft Diameter 25.4 mm (1 Inch)

Kelton Mc Naughton System M8

With this remarkable tool, you are able to save the middle part of a bowl in one piece and therefore produce several bowls out of one wooden block. Especially with scarce pieces of wood that have unique grain it is possible to optimally...
variants
€362.00

incl. VAT plus shipping costs

Article No. 702071

Kelton Large Bowl Chisels, 3-Piece Set

Kelton Large Bowl Chisels, 3-Piece Set

These large bowl chisels are suitable for large bowls, plates and similar objects. Fits No. 702071 and 702089 Max. diameter of the saved bowl 457 mm.
€210.00

incl. VAT plus shipping costs

Article No. 702095

Kelton Replacement Bowl Chisels, 3-Piece Set

Kelton Replacement Bowl Chisels, 3-Piece Set

Fits No. 702071 and 702089 . Max. diameter of the saved bowl 355 mm.
€173.00

incl. VAT plus shipping costs

Article No. 702101

Oneway Termite 2 Ring Tool, Set with Martel Shank and Hardwood Handle

Oneway Termite 2 Ring Tool, Set with Martel Shank and Hardwood...

Oneway Termite 2 (No. 729640 ) with Martel shank (No. 729641 ) and Martel hardwood handle (No. 729644 ). Two handle surfaces for effortless and safe guidance of the tool. Oiled maple handle.
€87.00

incl. VAT plus shipping costs

Article No. 729652

Oneway Termite 2 Ring Tool

Oneway Termite 2 Ring Tool

This ring tool is ideal for hollowing deep end-grain wood objects. Due to the closed cutting edge circle (contrary to hook tools) the risk of hooking during turning is reduced many times over. Due to the exceptionally high cutting...
€24.90

incl. VAT plus shipping costs

Article No. 729640

Martel Hook Tool, Set 1

Martel Hook Tool, Set 1

Martel hook tool, size 1 (No. 729637 ) with matching shank (No. 729641 ) and balanced hardwood handle (No. 729644 ). Two handle surfaces for effortless and safe guidance of the tool. Oiled maple handle. For diameters up to 150 mm.
€109.00

incl. VAT plus shipping costs

Article No. 729648

Martel Hook Tool, Set 2

Martel Hook Tool, Set 2

Martel hook tool, size 2 (No. 729638 ) with matching shank (No. 729642 ) and balanced hardwood handle (No. 729645 ). Two handle surfaces for effortless and safe guidance of the tool. Oiled maple handle. For diameters from 100 to 300 mm.
€134.00

incl. VAT plus shipping costs

Article No. 729649

Martel Hook Tool, Set 3

Martel Hook Tool, Set 3

Martel hook tool, size 3 (No. 729639 ) with matching shank (No. 729643 ) and balanced hardwood handle (No. 729646 ). Two handle surfaces for effortless and safe guidance of the tool. Oiled maple handle. For diameters from 250 mm.
€224.00

incl. VAT plus shipping costs

Article No. 729650

Martel Hook Tool, Size 1

Martel Hook Tool

Unlike a classic hook tool, the Martel hook tool allows the experienced woodturner to work without a pilot hole. For this purpose the Martel hook tool has a special bevel that also allows cuts to be made with the bottom of the front...
variants
€55.30

incl. VAT plus shipping costs

Article No. 729637

Martel Felt Polishing Tool

Martel Felt Polishing Tool

Polishing tool for the Martel hook tool. The polishing tool is clamped in a drill or cordless screwdriver and guided along the cutting edge. The conical, slightly convex head shape enables precise positioning.
€4.50

incl. VAT plus shipping costs

Article No. 729657

Martel Diamond Sharpening File, Grit 600

Martel Diamond Sharpening File, Grit 600

Diamond-coated sharpening file for Martel hook tools.
€18.30

incl. VAT plus shipping costs

Article No. 729656

Martel Diamond Sharpening Tool, Grit 150

Martel Diamond Sharpening Tool, Grit 150

Sharpening tool for the Martel hook tools. The sharpening tool is clamped in a drill or cordless screwdriver and guided along the cutting edge. The conical, slightly convex head shape enables precise positioning.
€16.80

incl. VAT plus shipping costs

Article No. 729655

Hope Pro-Sander Complete Set, 11 Pieces

Hope Pro-Sander Complete Set, 11 Pieces

For safe sanding of deep bowls, large vases and deep contours with a lathe. The fully adjustable angle of the swivelling head allows sanding in hard-to-reach spaces. Easy to use and highly efficient. The velcro system allows quick...
€75.90

incl. VAT plus shipping costs

Article No. 707801

2 of 2