Sharpening accessories

4 of 8
Camber Roller Assembly for Veritas Sharpening System II

Camber Roller Assembly for Veritas Sharpening System II

This accessory guide with barrel-shaped roller allows for honing slight curves into plane blade edges whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly of the Veritas sharpening...
€39.90

incl. VAT plus shipping costs

Article No. 703839

Veritas Sharpening System II with Narrow Blade Honing Guide

Veritas Sharpening System II with Narrow Blade Honing Guide

The self-centring double jaw honing device allows for the quick and easy sharpening of even the narrowest of chisels, mortise chisels or plane blades. The high-precision guide permits precise and consistent perpendicular sharpening,...
€105.80

incl. VAT plus shipping costs

Article No. 703844

Veritas Deluxe Honing Guide System II, 5-Piece Set

Veritas Deluxe Honing Guide System II, 5-Piece Set

This multifunctional deluxe set allows for the precise and easy sharpening of nearly all tool blades, whether they have straight or slightly rounded cutting edges, whether the blade width is 2 mm or 72 mm. The set includes: Standard...
€152.30

incl. VAT plus shipping costs

Article No. 703845

Veritas Narrow Blade Clamp for Veritas Sharpening System II

Veritas Narrow Blade Clamp for Veritas Sharpening System II

Convert your standard Veritas Sharpening System II (No. 703666 ) into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the...
€60.90

incl. VAT plus shipping costs

Article No. 703843

Magna-Tec Delta-S Rubbing Alcohol

Magna-Tec Delta-S Rubbing Alcohol

Isopropyl alcohol 99.9 %, 50 ml glass bottle. Suitable for the Magna-Tec Delta-S sharpening system (No. 708560 ).
€4.40

(Content: €88.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 708581

30° Skewed Jaws for Lie-Nielsen Honing Guide, Left

30° Skewed Jaws for Lie-Nielsen Honing Guide

The 30° skewed jaws fit Lie-Nielsen side rabbet planes.
variants
€55.80

incl. VAT plus shipping costs

Article No. 701218

18° Skewed Jaws for Lie-Nielsen Honing Guide, Left

18° Skewed Jaws for Lie-Nielsen Honing Guide

The 18° skewed jaws fit Lie-Nielsen skew block plane.
variants
€55.80

Article No. 701216

Lie-Nielsen Honing Guide Screwdriver

Lie-Nielsen Honing Guide Screwdriver

This screwdriver is made to fit the captive screws in the removable jaws for the Lie-Nielsen Honing Guide. Stainless steel blade, American cherry handle with brass ferrule. Overall length 137 mm
€64.90

incl. VAT plus shipping costs

Article No. 701212

Mortise Chisel Jaws for Lie-Nielsen Honing Guide

Mortise Chisel Jaws for Lie-Nielsen Honing Guide

The mortise chisel jaws fit all Lie-Nielsen mortise chisels, as well as the 25 mm (1 inch) bevel edge chisel.
€55.80

Article No. 701215

Chisel Jaws for Lie-Nielsen Honing Guide

Chisel Jaws for Lie-Nielsen Honing Guide

The chisel jaws fit 3 mm (1/8 inch) and 4.5 mm (3/16 inch) Lie-Nielsen bevel edge chisels as well as 6-19 mm (1/4 to ¾ inch) standard bevel edge chisels.
€55.80

Article No. 701214

Long Jaws for Lie-Nielsen Honing Guide

Long Jaws for Lie-Nielsen Honing Guide

The long jaws fit all spokeshave blades and match the following Lie-Nielsen planes: Low-angle jack rabbet plane, bench rabbet plane, cabinet maker's scraper No. 85, shoulder plane. These jaws are reversible. The short end hones a bevel...
€55.80

Article No. 701213

Lie-Nielsen Honing Guide

Lie-Nielsen Honing Guide

Solid side clamping honing guide, made of stainless steel, with a bronze bearing. The different removable jaws allow for the clamping of chisels with a blade width of under 5 mm, of mortise chisels, short plane blades and skew blades....
€189.90

incl. VAT plus shipping costs

Article No. 701211

4 of 8