DICTUM Carving Tool, Flat/Skew, Double Bevel
Straight chisels are preferred for lettering, but are also suitable for chip carving and for smoothing straight or slightly convex surfaces in figure sculpting. The skewed variant can be drawn across the surface and cuts into corners...
€29.40
incl. VAT plus shipping costs
Article No. 701524
DICTUM Carving Tools, 12-Piece Set
With these twelve sculptor's tools you are perfectly equipped for sculpting figures and ornaments. Flat 10 mm; flat/skew 10 mm; V-parting tool 41 V 65° / 6 mm; gouges, straight sweep 6 / 10 and 20 mm; sweep 8 / 6 and 13 mm; sweep 9 / 6...
€424.00
incl. VAT plus shipping costs
Article No. 701481
DICTUM Carving Tool, Pod Tool
Thanks to their conical form, pod tools are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be corrected.
€31.70
incl. VAT plus shipping costs
Article No. 701499
DICTUM Carving Tool, Pod Tool
Thanks to their conical form, pod tools are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be corrected.
€31.60
incl. VAT plus shipping costs
Article No. 701506
DICTUM Carving Tool, Pod Tool
Thanks to their conical form, pod tools are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be corrected.
€34.10
incl. VAT plus shipping costs
Article No. 701508
DICTUM Carving Tool, Dogleg Gouge 82/6 mm
This gouge is used to clear the ground of deep, shouldered areas to their final depth and to rework corners.
€50.70
incl. VAT plus shipping costs
Article No. 701529
DICTUM Carving Tools, Gouges, Back Bent, Inside Bevel
Primarily used for convex shapes and cylindrical profiles which cannot be worked on with a turned straight gouge because of the strong curve.
€36.30
incl. VAT plus shipping costs
Article No. 701477
DICTUM Carving Tools, Gouge/V-Parting Tools, Short Bent
Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
€32.70
incl. VAT plus shipping costs
Article No. 701461
DICTUM Carving Tools, Gouge/V-Parting Tools, Short Bent
Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
€32.70
incl. VAT plus shipping costs
Article No. 701463
DICTUM Carving Tools, Gouge/V-Parting Tools, Short Bent
Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
€33.00
incl. VAT plus shipping costs
Article No. 701749
DICTUM Carving Tools, V-Parting Tools
V-parting tools are popularly used in relief carving to delimit areas. Another important use is the cutting of even grooves.
€34.30
incl. VAT plus shipping costs
Article No. 701466
DICTUM Carving Tools, V-Parting Tools
V-parting tools are popularly used in relief carving to delimit areas. Another important use is the cutting of even grooves.
€34.70
incl. VAT plus shipping costs
Article No. 701475
DICTUM Carving Tool, Gouge/V-Parting Tool, Long Bent
The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.
€35.60
incl. VAT plus shipping costs
Article No. 701456
DICTUM Carving Tool, Gouge/V-Parting Tool, Long Bent
The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.
€35.50
incl. VAT plus shipping costs
Article No. 701459
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€29.90
incl. VAT plus shipping costs
Article No. 701653
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€29.90
incl. VAT plus shipping costs
Article No. 701750
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€36.10
incl. VAT plus shipping costs
Article No. 701429
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€31.70
incl. VAT plus shipping costs
Article No. 701751
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€40.30
incl. VAT plus shipping costs
Article No. 701436
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€31.70
incl. VAT plus shipping costs
Article No. 701654
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€32.10
incl. VAT plus shipping costs
Article No. 701669
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€32.30
incl. VAT plus shipping costs
Article No. 701698
DICTUM Carving Tools, Gouges, Straight
Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
€33.90
incl. VAT plus shipping costs
Article No. 701699
DICTUM Carving Tools, Chisels, Double Bevel
Straight chisels are preferred for lettering, but are also suitable for chip carving and for smoothing straight or slightly convex surfaces in figure sculpting. The skewed variant can be drawn across the surface and cuts into corners...
€28.70
incl. VAT plus shipping costs
Article No. 701744
DICTUM Carving Tool, V-Parting Tool, Short Bent
Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
€36.80
incl. VAT plus shipping costs
Article No. 701473
DICTUM Carving Tool, V-Parting Tool, Long Bent 42/6 mm
The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.
€39.30
incl. VAT plus shipping costs
Article No. 701472
DICTUM Carving Tools, 6-Piece Sets
6-piece set as basic equipment for beginners. Flat/skew 13 mm; V-parting tool 41 V 65° / 10 mm; gouges, straight sweep 5 / 20 mm; sweep 6 / 13 mm; sweep 8 / 10 mm; sweep 10 / 6 mm.
€191.00
incl. VAT plus shipping costs
Article No. 701536
DICTUM Compact Carving Tool
The blade is shorter than standard carving tools to work closer to the workpiece. The sculptor can create extraordinarily precise details by hand thanks to the combination of a short blade with a compact octagonal ball grip that lies...
€35.60
incl. VAT plus shipping costs
Article No. 701688
DICTUM Compact Carving Tool
The blade is shorter than standard carving tools to work closer to the workpiece. The sculptor can create extraordinarily precise details by hand thanks to the combination of a short blade with a compact octagonal ball grip that lies...
€34.30
incl. VAT plus shipping costs
Article No. 701685
DICTUM Compact Carving Tool
The blade is shorter than standard carving tools to work closer to the workpiece. The sculptor can create extraordinarily precise details by hand thanks to the combination of a short blade with a compact octagonal ball grip that lies...
€39.80
incl. VAT plus shipping costs
Article No. 701682
DICTUM Compact Carving Tool
The blade is shorter than standard carving tools to work closer to the workpiece. The sculptor can create extraordinarily precise details by hand thanks to the combination of a short blade with a compact octagonal ball grip that lies...
€35.10
incl. VAT plus shipping costs
Article No. 701680
DICTUM Carving Tools in Cotton Tool Roll, 4-Piece Set
4-piece set as a basic equipment for beginners. DICTUM carving knife, shape BS/K, with leather cutting edge protection and selected DICTUM carving tools. Flat 1 / 10 mm; V-parting tool 41 V 65° / 10 mm; gouge, straight, sweep 8 / 10 mm.
€134.00
incl. VAT plus shipping costs
Article No. 728901
Pfeil Dräyer Gouge, Blade Width 60 mm
Ideal for preliminary cutting. Slightly skewed blade for pulling cut and good chip formation. Bevelled on both sides.
€92.30
incl. VAT plus shipping costs
Article No. 701279
Pfeil Allongee Gouges
With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
€93.70
incl. VAT plus shipping costs
Article No. 700946
Pfeil Allongee Gouges
With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
€85.40
incl. VAT plus shipping costs
Article No. 701274
Pfeil Allongee Gouges
With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
€85.40
incl. VAT plus shipping costs
Article No. 701275
Pfeil Allongee Gouges
With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
€91.00
incl. VAT plus shipping costs
Article No. 701276
Pfeil Allongee Gouges
With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
€103.00
incl. VAT plus shipping costs
Article No. 701271
Pfeil Allongee Gouges
With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
€104.00
incl. VAT plus shipping costs
Article No. 700949
Pfeil Carving Tool, Gouge, Fishtail, Thin Blades
Thanks to their conical form, fishtail gouges are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be...
€33.40
incl. VAT plus shipping costs
Article No. 700740
Pfeil Carving Tool, Gouge, Fishtail, Thin Blades
Thanks to their conical form, fishtail gouges are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be...
€33.40
incl. VAT plus shipping costs
Article No. 700745
Pfeil Carving Tool, Gouge, Fishtail, Thin Blades
Thanks to their conical form, fishtail gouges are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be...
€33.40
incl. VAT plus shipping costs
Article No. 700750
Pfeil Carving Tool, Gouge, Fishtail, Thin Blades
Thanks to their conical form, fishtail gouges are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be...
€33.80
incl. VAT plus shipping costs
Article No. 700755
Pfeil Carving Tool, Dragon Gouge, Bevel Straight
This strongly bent gouge is ideal for deep recesses and for finishing corners, lettering and ornaments.
€34.90
incl. VAT plus shipping costs
Article No. 700689
Pfeil Carving Tool, Dogleg Gouge
This gouge is used to clear the ground of deep, shouldered areas to their final depth and to rework corners.
€34.90
incl. VAT plus shipping costs
Article No. 700728
Pfeil Carving Tools, Gouges, Back Bent, Inside Bevel
Primarily used for convex shapes and cylindrical profiles which cannot be worked on with a turned straight gouge because of the strong curve.
€35.90
incl. VAT plus shipping costs
Article No. 701361
Pfeil Carving Tools, Gouges, Back Bent, Inside Bevel
Primarily used for convex shapes and cylindrical profiles which cannot be worked on with a turned straight gouge because of the strong curve.
€35.90
incl. VAT plus shipping costs
Article No. 700736
Pfeil Carving Tools, Gouges/V-Parting Tools, Short Bent
Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
€30.10
incl. VAT plus shipping costs
Article No. 701257