Sanders

4 of 5
MANPA Sanding Pads, 3-Piece Set, Ø 3 Inch (75 mm)

MANPA Sanding Pads, 3-Piece Set

Intermediate damping pad for sanding work on strongly curved contours. The pad with Velcro coating on both sides is positioned between the abrasive and the sanding disc. It also protects the sanding disc from premature wear.
variants
€19.90

incl. VAT plus shipping costs

Article No. 729902

DICTUM Clamping Mandrel for Belt and Disc Sander BTS 100/150 (No. 721054)

DICTUM Clamping Mandrel for Belt and Disc Sander BTS 100/150...

For holding polishing devices such as buffing wheels, cloth wheels, etc. with 10 mm and 20 mm bore. Clamping width max. 25 mm. Clamping mandrel Ø 10 mm incl. reducing sleeve 20/10 mm, 1 pair of clamping flanges 10/55 mm, 1 pair of...
€22.20

incl. VAT plus shipping costs

Article No. 729777

Cleaning Block for Abrasives

Cleaning Block for Abrasives

Prevents the build-up of sanding dust and resin on abrasives. This increases the abrasive quality and increases the service life of the abrasive by two to four times. For sanding belts, discs, drums, etc. 200 x 38 x 38 mm.
€10.60

incl. VAT plus shipping costs

Article No. 707763

Holding Arbors with Clamping Flanges, Pair

Holding Arbors with Clamping Flanges, Pair

One left-hand and one "right-hand holding arbor with two flange discs each. For clamping polishing and grinding discs. Arbor diameter 10 mm x 35 mm. For machine shafts with diameter 10 mm.
€9.90

incl. VAT plus shipping costs

Article No. 728800

Holding Arbors, Pair

Holding Arbors, Pair

One left-hand and one right-hand holding arbor each, incl. clamping nut. For clamping polishing and grinding discs, grinding rollers, etc. Arbor diameter 10 mm x 63 mm. For machine shafts with diameter 10 mm.
€13.40

incl. VAT plus shipping costs

Article No. 728801

Grinding Roller

Grinding Roller

For mounting on the right-hand shaft of the polishing motor. Laminated rubber roller with holding arbor. Incl. sanding sleeves. For machine shafts with diameter 10 mm.
€14.90

incl. VAT plus shipping costs

Article No. 728802

Sanding Sleeve, Ø 50 mm

Sanding Sleeve, Ø 50 mm

Fits grinding roller for DICTUM Mini Polishing Motor (No. 728802 ). Sleeve length 50 mm.
€0.90

incl. VAT plus shipping costs

Article No. 728803

Splash Guard for DICTUM Mini Polishing Motor PM 75

Splash Guard for DICTUM Mini Polishing Motor PM 75

Thanks to the high speeds of polishing motors, fibres of the polishing discs and polishing paste are spun away. The sheet steel housing with folding splash guard prevents contamination on workbenches or walls. A must for work outside...
€42.60

incl. VAT plus shipping costs

Article No. 728822

Scroll Chuck 6.5 mm

Scroll Chuck 6.5 mm

For mounting on the right-hand shaft. Comes with chuck key. For machine shafts with diameter 10 mm. Clamping range 1-6.5 mm.
€12.90

incl. VAT plus shipping costs

Article No. 728799

DICTUM Flexible Shaft with Gear Rim Drill Chuck, 6 mm

DICTUM Flexible Shaft with Gear Rim Drill Chuck

Work flexibly and effectively in hard-to-reach places - no problem with the flexible shaft with a total length of 130 cm. A large handle with hand guard safely covers the rotating drill chuck and provides a good grip. Shaft tools such as...
variants
€32.10

incl. VAT plus shipping costs

Article No. 728820

Clamping Flange, Pair, 10/40 mm

Clamping Flange, Pair, 10/40 mm

Inner diameter 10 mm, outer diameter 40 mm. 2 pieces.
€2.30

incl. VAT plus shipping costs

Article No. 729775

Clamping Flange, Pair, 10/55 mm

Clamping Flange, Pair, 10/55 mm

Solid steel, inner diameter 10 mm, outer diameter 55 mm. 2 pieces.
€6.90

incl. VAT plus shipping costs

Article No. 729454

4 of 5