Sawing

15 of 19
UJK Dog Rail Clip, 2-Piece Set

UJK Dog Rail Clip, 2-Piece Set

These simple-looking spring clips firmly secure a guide rail to Parf dogs or other dogs, e.g. when sawing on a multifunction table. This prevents the guide rail from accidentally shifting due to a slippery or dusty surface or vibrations,...
€23.90

incl. VAT plus shipping costs

Article No. 707987

Kickback Protection for MICROJIG GRR-RIPPER 3D

Kickback Protection for MICROJIG GRR-RIPPER 3D

Grips the rear edge of the workpiece, increases the feed force, prevents the workpiece from being ejected and is adjustable to the respective workpiece thickness. Avoids tear-outs and splintering when used as »sacrificial wood«. Scope of...
€19.50

incl. VAT plus shipping costs

Article No. 718047

Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D

Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D

Extremely narrow pressure beam that guides thin strips up to a width of max. 3 mm safely between saw blade and longitudinal fence. A non-slip rubber coating prevents the workpiece from slipping and avoids pressure points on soft wood....
€19.50

incl. VAT plus shipping costs

Article No. 718048

Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set

Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set

Fits MICROJIG Pushblock GRR-RIPPER 3D (No. 718045 , 718046 ). 3 pieces, width 6, 13, 28 mm.
€41.20

incl. VAT plus shipping costs

Article No. 718050

MICROJIG Pushblock GRR-RIPPER 3D

MICROJIG Pushblock GRR-RIPPER 3D

The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push stick or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
variants
€57.90

Article No. 718045

Microdial Tapering Jig

Microdial Tapering Jig

For formatting panel material or producing tapered components. Create 2-, 4-, 6- or 8-sided tapered chair or table legs with unmatched precision, control and safety. For even more safety, you can work with up to two GRR-RIPPER ADVANCED...
€153.90

incl. VAT plus shipping costs

Article No. 718495

MAFELL Roller Edge Guide MF-UA

MAFELL Roller Edge Guide MF-UA

Fits MAFELL MT 55 cc, MF 26 cc, KSS 60, K 65 cc, KSS 50, K 55 cc.
€83.30

incl. VAT plus shipping costs

Article No. 721103K

Push Stick

Push Stick

On circular bench saws, bandsaws or table routers, small and narrow workpieces must be guided with the push stick. Length 42 cm.
€4.10

incl. VAT plus shipping costs

Article No. 727937

Featherboard with Clamping System for T-Slots, 2-Piece Set

Featherboard with Clamping System for T-Slots, 2-Piece Set

The pressure springs ensure precise workpiece guidance and additional safety when operating the woodworking machine. Whether used on a table router, circular saw or bandsaw, the amount of applied pressure is sustained over a wide area so...
€27.90

incl. VAT plus shipping costs

Article No. 714516

Milescraft »GrabberPRO« Push Block

Milescraft »GrabberPRO« Push Block

The adjustable push block is ideal for use on circular table saws, router tables, jointers and bandsaws. Designed for maximum control, precision and work safety. The many adjustment possibilities allow the workpiece to be guided over the...
€42.30

incl. VAT plus shipping costs

Article No. 714609

MAFELL Guide Pocket F 160

MAFELL Guide Pocket F 160

For Guide Rails up to 1.6 m and accessories.
€101.75

incl. VAT plus shipping costs

Article No. 709448K

Accessory Set for DICTUM Multifunction Tables

Accessory Set for DICTUM Multifunction Tables

Conveniently stored in a plastic case, the most important accessories for the MFT are always at hand and well organised. For precise positioning of workpieces or for formatting with a hand-held circular saw or router. Includes: 2...
€114.90

incl. VAT plus shipping costs

Article No. 729886

15 of 19