OFFER: MAFELL ERIKA 85 Ec, Sliding Table, Extension T. +...
If the ERIKA 70 Ec cannot handle the required cutting height, there is always its "big sister" - the ERIKA 85 Ec, ideal for large workpieces with a cutting height of up to 85 mm (3 3/8 in.). The unique suction channel concentrates the...
€5,584.31
€5,117.00
incl. VAT plus shipping costs
Article No. 721361K
€22.90
incl. VAT plus shipping costs
Article No. 727964
€3.90
incl. VAT plus shipping costs
Article No. 830512
€12.90
incl. VAT plus shipping costs
Article No. 830498
Tensioning Knob for DICTUM Bandsaw
Hand knob for tensioning the saw blade. Fits bandsaws Nos. 727447 , 727448 .
€4.20
incl. VAT plus shipping costs
Article No. 830507
€4.90
incl. VAT plus shipping costs
Article No. 830504
Brass Guide Pin for DICTUM Bandsaw BS 200-08 (No. 727446)
Fits DICTUM Bandsaw BS 200-08 (No. 727446 ). Two pins are needed each for the upper (No. 830494 ) and the lower (No. 830493 ) guide.
€1.90
incl. VAT plus shipping costs
Article No. 830493
MAFELL Cordless Cross-Cutting System KSS 40 18M bl
Mafell has not reinvented cross-cutting - but made it easier and more portable. And with the new KSS 40 18M bl, we have even added a battery: one that delivers what it promises - innovative battery technology for maximum performance....
€913.92
incl. VAT plus shipping costs
Article No. 721099K
Dust Port for Bandsaw
Incl. internal protective grid. Fits DICTUM Bandsaw BS 270-10 (No. 727447 ) and BS 320-12 (No. 727448 ).
€4.20
incl. VAT plus shipping costs
Article No. 830502
Table Insert for Bandsaw BS 360-14, 1 Piece
Aluminium table insert suitable for DICTUM Bandsaw BS 360-14.
€4.90
incl. VAT plus shipping costs
Article No. 801007
Saw Blade for Sabre Saw
Saw blade with the precision of a Japanese saw for clean trimming cuts across the grain in soft and hard woods, as well as glued wood and sheet materials. The teeth are extremely wear-resistant for high durability and performance. Even...
€9.90
incl. VAT plus shipping costs
Article No. 712711
Mitre Gauge with Guide Rail, 150 cm
This mitre gauge with guide rail makes formatting and trimming wood-based materials, plaster fibreboards and insulating panels, etc. much easier.. Set the required angle quickly on the rail, saw, done. Without any scribing. Most common...
€454.00
incl. VAT plus shipping costs
Article No. 716395