Routing

19 of 21
Festool Roundover cutter S8 HW R2 D20-KL OFK

Festool Roundover cutter S8 HW R2 D20-KL OFK

Main areas of application: Edge-trimming cutter for 2 mm edges with 10° transition
€71.50

incl. VAT plus shipping costs

Article No. 706676

Festool Aluminium cutter HS S8 D5/NL23

Festool Aluminium cutter HS S8 D5/NL23

Main areas of application: HS spiral groove cutter for cutting grooves for draining water in aluminium profiles
€19.90

incl. VAT plus shipping costs

Article No. 706678

Festool Drilling cutter HW S8 D8/19

Festool Drilling cutter HW S8 D8/19

Main areas of application: For cutouts of any kind - without pre-drilling, the drilling cutter goes right through the coating material. Through the subsequent routing of contours, splinters on the edges of the coatings are effectively...
€33.90

incl. VAT plus shipping costs

Article No. 706679

Festool Edge trimming cutter HW S8 D12,7/NL25

Festool Edge trimming cutter HW S8 D12,7/NL25

Main areas of application: Edge trimming cutter with ball bearing below - this allows coatings in and on panel edges to be flush cut. Because of the small ball bearing, even inner radii of 15 mm can be flush cut
€63.20

incl. VAT plus shipping costs

Article No. 706680

Festool Through-hole drill HW S8 D5/30

Festool Through-hole drill HW S8 D5/30

Main areas of application: "Through-hole drilling bits for rows of holes; suitable for cutting through panels with its longer HW drill bit"
€35.70

incl. VAT plus shipping costs

Article No. 706681

Festool Flute cutter HW S8 D31,7/R9,5 KL

Festool Flute cutter HW S8 D31,7/R9,5 KL

Main areas of application: For every flute cutter, Festool offers a roundover cutter with the same radius (except for R 20). Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles
€66.80

incl. VAT plus shipping costs

Article No. 706686

Festool Groove cutter HW S8 D3/6

Festool Groove cutter HW S8 D3/6

Main areas of application: More security against small diameter bits breaking because of the low vibration all tungsten carbide cutter design. The partially ground standard tungsten carbide blade provides an increased service life when...
variants
€38.40

incl. VAT plus shipping costs

Article No. 706688

Festool Groove cutter HW S8 D10/25

Festool Groove cutter HW S8 D10/25

Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade
variants
€39.90

incl. VAT plus shipping costs

Article No. 706693

Festool Groove cutter HW S12 D13,2/35 PLANET

Festool Groove cutter HW S12 D13,2/35 PLANET

Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade. Together with the routing aids, automatic door seals can be routed on the front
€92.90

incl. VAT plus shipping costs

Article No. 706700

Festool Disk groove cutter HW D40x1,5

Festool Disk groove cutter HW D40x1,5

Main areas of application: Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm. The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm
variants
€24.90

incl. VAT plus shipping costs

Article No. 706701

Festool Script cutter HS S8 D11/60°

Festool Script cutter HS S8 D11/60°

Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€45.20

incl. VAT plus shipping costs

Article No. 706706

Festool Script cutter HW S8 D11/60°

Festool Script cutter HW S8 D11/60°

Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€56.90

incl. VAT plus shipping costs

Article No. 706707

19 of 21