UJK Long Super Dog Locking Shaft for Parf Super Dog
This long shaft replaces the standard shaft of the UJK Super Dog (No. 720652 ) converting it into the taller UJK Long Super Dog (No. 720653 ). The conversion increases the projection of the dog above your multifunction table's surface to...
€12.40
incl. VAT plus shipping costs
Article No. 745273
DICTUM Aluminium Bench Dogs with Workpiece Protection, Pair
When working with a plunge saw or router for example, aluminium bench dogs have the advantage that they are easily machinable and thus there is no damage to the machine and the saw blade or router bit in case of collisions. Sometimes,...
€14.20
incl. VAT plus shipping costs
Article No. 714688
Hattori Step Block, 50 x 100 mm
The graduations milled at 10 mm intervals offer precise adjustment possibilities when clamping or setting workpieces for machining. End support for hold-down clamps: The clamping height of many T-slot hold-downs is limited by the...
€15.90
incl. VAT plus shipping costs
Article No. 714710
Hattori Universal Horizontal Clamp
The clamping elements fix round and square workpieces equally quickly and securely. The low installation height of 21 mm and the lateral clamping option offer a great advantage, especially with flat workpieces. The surface remains...
€49.00
incl. VAT plus shipping costs
Article No. 714707
Hattori Hold Down Clamp, 100/50 mm
Made of solid aluminium with protective rubber caps at the ends, this hold-down clamp fixes workpieces on routing templates, other devices or worktables. Due to the M8 x 100 threaded rod, the hold-down clamp can also be combined with...
€17.50
incl. VAT plus shipping costs
Article No. 714711
Magnetic Base Light, Flexible Gooseneck, LED
An indispensable workshop accessory that is used especially for intricate work with bandsaws, drills, edge sanders and lathes. A powerful switchable magnetic base and a long flexible neck allow you to position the light source...
€79.00
incl. VAT plus shipping costs
Article No. 715641
UJK Digital Height Gauge
The UJK Digital Height Gauge is an indispensable measuring tool for the accurate setting of cutting depths, in particular, for router cutters and saw blades. The body is CNC machined from 12mm thick phenolic sheet. A hard, dense...
€64.90
incl. VAT plus shipping costs
Article No. 745286
Tabletop for DICTUM MFT, Multi-layer Beech, Factory Seconds
Replacement top with hole grid for DICTUM Multifunction Table PRO. Eight 8 mm T-slots and 24 holes with a diameter of 20 mm enable bench dogs, track clamps, slot nuts, hold down clamps, and clamping devices to be precisely positioned at...
€149.00
incl. VAT plus shipping costs
Article No. 714292
UJK 20 mm Dog Storage Rack
Avoid lengthy searches for MFT bench dogs or Parf Dogs. With the UJK Dog Rack, which is mounted e.g. to the workshop wall, up to eight useful aids are always at hand. It holds up to eight UJK Parf Dogs, Superdogs, Anchor Dogs, etc. or...
€25.70
incl. VAT plus shipping costs
Article No. 720659
DICTUM Multifunction Table PRO, Closed Top
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,139.00
incl. VAT plus shipping costs
Article No. 728755
DICTUM Multifunction Table PRO, Hole Pattern 77
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,209.00
incl. VAT plus shipping costs
Article No. 728758
DICTUM Multifunction Table PRO, Hole Pattern X61
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,209.00
incl. VAT plus shipping costs
Article No. 728761