Hattori Universal Fence Clamp
These clamps are used when the clamping arm of a conventional clamp cannot rest flat on the workpiece surface. The ideal clamp for auxiliary fences and devices. Even workpieces that are difficult to clamp, e.g. sculpture blanks, can be...
€11.90
incl. VAT plus shipping costs
Article No. 714517
Push Stick
On circular bench saws, bandsaws or table routers, small and narrow workpieces must be guided with the push stick. Length 42 cm.
€4.10
incl. VAT plus shipping costs
Article No. 727937
Featherboard with Clamping System for T-Slots, 2-Piece Set
The pressure springs ensure precise workpiece guidance and additional safety when operating the woodworking machine. Whether used on a table router, circular saw or bandsaw, the amount of applied pressure is sustained over a wide area so...
€27.90
incl. VAT plus shipping costs
Article No. 714516
Milescraft »GrabberPRO« Push Block
The adjustable push block is ideal for use on circular table saws, router tables, jointers and band saws. Designed for maximum control, precision and work safety. The many adjustment possibilities allow the workpiece to be guided over...
€42.30
incl. VAT plus shipping costs
Article No. 714609
€39.00
incl. VAT plus shipping costs
Article No. 708087
UJK Adjustable Work Support Dogs, 4-Piece Set
The 30 mm diameter anti-slip supports hold the workpiece in place. They are height-adjustable and lockable. This allows uneven workpieces to be levelled for machining. The 20 mm pin fits into the hole pattern of the multifunctional...
€54.90
incl. VAT plus shipping costs
Article No. 730846
UJK Reamer for 20 mm Bench Dog Holes
For precise work it is essential that accessories fit accurately into the multifunctional table’s hole grid. Depending on the tabletop material, a change in wood moisture content or protruding wood fibres can cause the accessories to...
€28.50
incl. VAT plus shipping costs
Article No. 730847
UJK Bench Dogs for Guide Rails, Pair
These 20 mm diameter bench dogs are equipped with a T-screw for fastening to the underside of guide rails. When formatting on multi-function tables with a plunge saw, this eliminates the annoying bench dogs that normally hit the sides of...
€55.20
incl. VAT plus shipping costs
Article No. 730849
UJK Parf Anchor Dogs, 18 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€20.90
incl. VAT plus shipping costs
Article No. 715434
UJK Parf Anchor Dogs, 32 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€24.00
incl. VAT plus shipping costs
Article No. 730845
In-line Clamp
Clamp with rack feed, made of anodised aluminium. The large rotary wheel enables fine and sensitive pressure regulation. Equipped with a replaceable plug-in pin on the underside, it is fixed in the dog holes of workbenches or...
€74.90
incl. VAT plus shipping costs
Article No. 714637
T-Screws M6, 10-Piece Set
The screw head is shaped like a sliding nut and thus offers flexible use in T-tracks. For fastening workpieces, hold-down clamps or other auxiliary and clamping devices. The screw head slides in brace profiles and slotted rails, e.g. No....
€3.90
incl. VAT plus shipping costs
Article No. 730852
T-Screws M8, 10-Piece Set
The screw head is shaped like a sliding nut and thus offers flexible use in T-tracks. For fastening workpieces, hold-down clamps or other auxiliary and clamping devices. The screw head slides in brace profiles and slotted rails, e.g. No....
€5.90
incl. VAT plus shipping costs
Article No. 730855
Clamping Sleeve Adapter for Piher Mini Quick
The clamping sleeve for 20 mm holes allows the Mini Quick one-handed clamp to be used as an insertion clamp or horizontal clamping element on e.g. multifunction tables. Insertion clamp: Remove the fixed bracket of the Mini Quick...
€28.30
incl. VAT plus shipping costs
Article No. 730094
Slot Nut M8, 2 Pieces
Versatile slot nut made of aluminium with 45 mm length. Ideal for making auxiliary and clamping devices combined with guide rails. One threaded hole M8 with brass pressure screw for fixing the slot nut in guide rails for example and one...
€6.50
incl. VAT plus shipping costs
Article No. 714668
Guide Rail
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions 30 x...
€12.90
incl. VAT plus shipping costs
Article No. 714672
Slot Nut 200 mm, M6/M8
Slot nut with 200 mm length for constructing auxiliary and clamping devices combined with guide rails. The long slot nut is also suitable as a glide, e.g. for cross or angle fences on machine tables. The four M6 and three M8 internal...
€8.90
incl. VAT plus shipping costs
Article No. 714670
Sliding Rail, 300 mm
Adjustable sliding rail with square cross-section (19 x 9.5 mm) for guiding in T-tracks (e.g. Nos. 714672 , 714673 ). The 300 mm long rail contains four M6 threads for fastening stops, auxiliary devices, etc. The play between the sliding...
€12.90
incl. VAT plus shipping costs
Article No. 714671
Hattori Hold-down Clamp, Height Adjustable
Hold down clamp milled from solid aluminium with adjustable counterpressure part (three locking positions). This ensures the ideal position and maximum clamping force at any clamping height between 0 and 80 mm. A large star handle allows...
€29.90
incl. VAT plus shipping costs
Article No. 714650
Veritas T-Slot Fence Flip-Stop
T-slot length stop that can be fitted onto the T-track (No. 703899 ) for example, to facilitate the trimming of same-length workpieces for example. The stop can stay permanently on the T-track and be folded up when not in use.
€28.80
incl. VAT plus shipping costs
Article No. 703309
MICROJIG Handle Bridge Kit for Pushblock GRR-RIPPER
The unique arch design gives the handle four points of contact to evenly distribute the downward pressure. Oblong holes allow you to angle the handle and thus comfortably maintain an even pressure. This promotes fatigue-free work through...
€19.60
incl. VAT plus shipping costs
Article No. 725026
MICROJIG Pushblock GRR-RIPPER2 Go
The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push block or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
€43.30
incl. VAT plus shipping costs
Article No. 725025
MICROJIG ZEROPLAY Mitre Bars
The ZEROPLAY mitre bars enable the construction of highly precise mitre gauges and auxiliary devices. Simply insert them into the T-rail or U-rail, adjust the width, test, done! The two-part bar can be varied in width and thus adapted to...
€20.60
incl. VAT plus shipping costs
Article No. 725028
MICROJIG Zeroplay 2-step Plunge Bit, 6.35 mm Shank
Stepped router bit for drilling and routing. Diameter a = 12.7 mm, diameter b = 6.35 mm. Rounding R 1.6 mm at the transitions for tear-free and visually appealing holes and slots. Counterbored holes: Use it in the drill press and obtain...
€61.90
incl. VAT plus shipping costs
Article No. 725029
UJK Long Super Dog Locking Shaft for Parf Super Dog
This long shaft replaces the standard shaft of the UJK Super Dog (No. 720652 ) converting it into the taller UJK Long Super Dog (No. 720653 ). The conversion increases the projection of the dog above your multifunction table's surface to...
€12.40
incl. VAT plus shipping costs
Article No. 745273
DICTUM Aluminium Bench Dogs with Workpiece Protection, Pair
When working with a plunge saw or router for example, aluminium bench dogs have the advantage that they are easily machinable and thus there is no damage to the machine and the saw blade or router bit in case of collisions. Sometimes,...
€14.20
incl. VAT plus shipping costs
Article No. 714688
Hattori Step Block, 50 x 100 mm
The graduations milled at 10 mm intervals offer precise adjustment possibilities when clamping or setting workpieces for machining. End support for hold-down clamps: The clamping height of many T-slot hold-downs is limited by the...
€15.90
incl. VAT plus shipping costs
Article No. 714710
Hattori Universal Horizontal Clamp
The clamping elements fix round and square workpieces equally quickly and securely. The low installation height of 21 mm and the lateral clamping option offer a great advantage, especially with flat workpieces. The surface remains...
€49.00
incl. VAT plus shipping costs
Article No. 714707
Hattori Hold Down Clamp, 100/50 mm
Made of solid aluminium with protective rubber caps at the ends, this hold-down clamp fixes workpieces on routing templates, other devices or worktables. Due to the M8 x 100 threaded rod, the hold-down clamp can also be combined with...
€17.50
incl. VAT plus shipping costs
Article No. 714711
Magnetic Base Light, Flexible Gooseneck, LED
An indispensable workshop accessory that is used especially for intricate work with bandsaws, drills, edge sanders and lathes. A powerful switchable magnetic base and a long flexible neck allow you to position the light source...
€79.00
incl. VAT plus shipping costs
Article No. 715641
UJK Digital Height Gauge
The UJK Digital Height Gauge is an indispensable measuring tool for the accurate setting of cutting depths, in particular, for router cutters and saw blades. The body is CNC machined from 12mm thick phenolic sheet. A hard, dense...
€64.90
incl. VAT plus shipping costs
Article No. 745286
Tabletop for DICTUM MFT, Multi-layer Beech, Factory Seconds
Replacement top with hole grid for DICTUM Multifunction Table PRO. Eight 8 mm T-slots and 24 holes with a diameter of 20 mm enable bench dogs, track clamps, slot nuts, hold down clamps, and clamping devices to be precisely positioned at...
€149.00
incl. VAT plus shipping costs
Article No. 714292
UJK 20 mm Dog Storage Rack
Avoid lengthy searches for MFT bench dogs or Parf Dogs. With the UJK Dog Rack, which is mounted e.g. to the workshop wall, up to eight useful aids are always at hand. It holds up to eight UJK Parf Dogs, Superdogs, Anchor Dogs, etc. or...
€25.70
incl. VAT plus shipping costs
Article No. 720659
DICTUM Multifunction Table PRO, Closed Top
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,139.00
incl. VAT plus shipping costs
Article No. 728755
DICTUM Multifunction Table PRO, Hole Pattern 77
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,209.00
incl. VAT plus shipping costs
Article No. 728758
DICTUM Multifunction Table PRO, Hole Pattern X61
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,209.00
incl. VAT plus shipping costs
Article No. 728761
Table Top for DICTUM Multifunction Table PRO, Closed
Replacement top without holes for DICTUM Multifunction Table PRO. The closed surface offers advantages such as being able to work with small parts during assembly processes (they no longer fall through the holes) or equipping it with an...
€102.00
incl. VAT plus shipping costs
Article No. 728764
Table Top for DICTUM Multifunction Table PRO, Hole Pattern 77
Replacement top with hole grid for DICTUM Multifunction Table PRO. 77 holes with Ø 20 mm allow an exact right-angled positioning of bench dogs and clamping devices. Hole spacing 95 mm. Worktop dimensions 1114 x 734 mm.
€165.00
incl. VAT plus shipping costs
Article No. 728767
Table Top for DICTUM Multifunction Table PRO, Hole Pattern X61
Replacement top with hole grid for DICTUM Multifunction Table PRO. 61 holes with Ø 20 mm allow an exact right-angled positioning of bench dogs and clamping devices. Two crossed slot grids allow the clamping of components without being...
€165.00
incl. VAT plus shipping costs
Article No. 728770
DICTUM Multifunction Bench Dogs MBH20
With the freely positionable MBH20 bench dogs and a plunge saw with guide rail, you can transform the multifunctional table PRO into a formatting platform that is equal to a sliding table saw. Due to the circumferential T-slot system on...
€40.10
incl. VAT plus shipping costs
Article No. 728775
T-slot Nut for 8 mm Groove
T-slot nut with pressure ball for T-track profiles for use with the DICTUM Multifunction Table PRO (e.g. No. 728760 ). Self-made clamping and auxiliary devices can thus be mounted quickly and easily on the table construction. Fits e.g....
€2.60
incl. VAT plus shipping costs
Article No. 728776
Parallel Connector for Aluminium Profile, 40 x 40 mm
Parallel connector for 40 x 40 mm aluminium profiles. Suitable for connecting two or more Multifunction Tables PRO (e.g. No. 728760 ). Made of anodised aluminium. 1 pair incl. connecting screw.
€29.30
incl. VAT plus shipping costs
Article No. 728778
Cross Connector for Aluminium Profile, 40 x 40 mm
Cross connector for 40 x 40 mm aluminium profiles. Two cross connectors are required per joint. Fits Multifunction Tables PRO (e.g. No. 728760 ). Made of anodised aluminium. 1 piece, incl. fastening screw M6 (without slot nut).
€12.40
incl. VAT plus shipping costs
Article No. 728779
Knurled Nut for Multifunction Bench Dogs MBH20
The 20 mm centring projection on the knurled nut allows it to be centred quickly and precisely in the holes of the plate. This ensures that the 8 mm thread is always in the middle of the hole and makes it easier to insert and screw on...
€5.20
incl. VAT plus shipping costs
Article No. 728991
Axminster Screw Thread Hold Down Clamp
The screw thread hold down clamp fits perfectly into any 20 mm bench dog hole. It makes an ideal addition to the Festool MFT/3 Multifunction table other grid tables with 20 mm holes. The swivel pad is a non-marring pad which will protect...
€44.30
incl. VAT plus shipping costs
Article No. 720655
UJK Parf Repeat Stop (PRS)
The PRS has been designed to make accurate repeatable cuts of the same length when using the plunge-cut saw’s guide rail e.g. on a multifunction workbench. It is versatile and can also be used in milling and drilling work and wherever...
€132.20
incl. VAT plus shipping costs
Article No. 720957
UJK Parf Super Dog
CNC machined from 303 stainless steel, UJK Technology Parf Super Dogs precisely match the holes made by the UJK Technology 20 mm cutter. They are compatible with the Festool MFT/3 tabletop and other grid tables with 20 mm holes. In order...
€44.00
incl. VAT plus shipping costs
Article No. 720652
UJK Parf Long Super Dog
The majority of plunge saws can cut between 40 and 65mm deep. However, when used with a guide track and standard Parf dogs on a multifunction workbench, the setup is generally limited to cutting sheet material. The UJK Technology Parf...
€49.00
incl. VAT plus shipping costs
Article No. 720653