Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Purfling, Maple, White/Black/White, 2 pcs

Purfling, Maple

Handmade, coloured 3-layer wooden strips, worked up with a special glue. Set consists of two strips, each one : 800 mm long 1.5 mm wide 1.5 mm high
variants
€2.30

incl. VAT plus shipping costs

Article No. 487077

Bindings, Maple, Black/White/Black, 2 pcs

Bindings, Maple

Handmade coloured 3-layer wooden strips, worked up with a special glue. Set consists of two strips, each one : 800 mm long 1.5 mm wide 2.5 mm high
variants
€3.20

incl. VAT plus shipping costs

Article No. 487071

Chinrest Key, Aluminium

Chinrest Key, Aluminium

For tightening chinrest screws.
€3.10

incl. VAT plus shipping costs

Article No. 707205

Silicone Workbench Mats, 200 x 200 mm, 4-piece Set

Silicone Workbench Mats, 200 x 200 mm, 4-piece Set

The mats protect your worktop against glue residue, oil, varnish and other contaminants . The surface is made of transparent silicone, completely flat, non-slip on the bench, and prevents the workpiece from slipping. Reinforced with...
variants
€11.90

incl. VAT plus shipping costs

Article No. 703567

Silicone Workbench Mats, 280 x 380 mm, 2-piece Set

Silicone Workbench Mats, 280 x 380 mm, 2-piece Set

The mats protect your worktop against glue residue, oil, varnish and other contaminants . The surface is made of transparent silicone, completely flat, non-slip on the bench, and prevents the workpiece from slipping. Reinforced with...
variants
€11.90

incl. VAT plus shipping costs

Article No. 703568

Silicone Workbench Mat, 400 x 600 mm

Silicone Workbench Mat, 400 x 600 mm

The mats protect your worktop against glue residue, oil, varnish and other contaminants . The surface is made of transparent silicone, completely flat, non-slip on the bench, and prevents the workpiece from slipping. Reinforced with...
variants
€11.90

incl. VAT plus shipping costs

Article No. 703569

French Spring Dividers with Pencil Holder, Shaft Length 150 mm

French Spring Dividers with Pencil Holder

Elegant French spring dividers made of gunmetal finished steel, with hardened tips, quick-acting screws.
variants
€32.50

incl. VAT plus shipping costs

Article No. 707151

Boxwood Handle, Ball-Shaped, Ferrule Diameter 18 mm

Boxwood Handles, Ball-Shaped

Polished boxwood, solid ferrule.
variants
€4.80

incl. VAT plus shipping costs

Article No. 701601

Wax Polish

Wax Polish

This Wax Polish protects plane soles made of steel and other flat surfaces from rust and at the same time reduces friction. Equally suited for cast iron, steel and iron. It also inhibits the tarnishing of polished copper, brass and...
€16.90

(Content: €169.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 705484

Thread for Tying of Hanks

Thread for Tying of Hanks

Thin, but extremely strong thread, 100 % flax, natural grey. 50 g spools
€24.30

(Content: €486.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 250169

Endpin Stop Rubber Rest

Endpin Stop Rubber Rest

Made in Germany. With metal insert.
€9.90

incl. VAT plus shipping costs

Article No. 433001

Endpin Stop Rubber Rest, Cello

Endpin Stop Rubber Rest

With metal insert.
variants
€5.90

incl. VAT plus shipping costs

Article No. 433015

variants
€19.90

incl. VAT plus shipping costs

Article No. 492541

Chinrest Key, Plastic, Black

Chinrest Key, Plastic, Black

For tightening chinrest screws.
€1.90

incl. VAT plus shipping costs

Article No. 707208

variants
€19.10

incl. VAT plus shipping costs

Article No. 903705

variants
€19.10

incl. VAT plus shipping costs

Article No. 903712

Saw and File Brush

Saw and File Brush

Robust Japanese brush for cleaning wet wood saws for garden and carpentry as well as all types of files. The flexible plastic bristles prevent damage to scratch-sensitive teeth.
€7.90

incl. VAT plus shipping costs

Article No. 716119

Japanese Workbench/Bonsai Brush

Japanese Workbench/Bonsai Brush

This workbench broom has always been one of the basic workshop tools in Japan. Made from the Japanese palm fern. Also often used for the care of bonsai, e.g. for sweeping dry leaves out of the crown or for cleaning the soil surface....
€9.90

incl. VAT plus shipping costs

Article No. 718327

Digital Outside Calliper

Digital Outside Calliper

Digital outside calliper for measuring outside diameter, wall thickness, etc. Ideal for woodturning purposes. On the large LCD display, the values can be read quickly and clearly in either inch, metric or fractional measurements....
€44.90

incl. VAT plus shipping costs

Article No. 715014

Holder for Pliers, incl. Mounting Material

Holder for Pliers, incl. Mounting Material

Holder with bracket for hanging e.g. pliers.
€11.90

incl. VAT plus shipping costs

Article No. 729845

Double Hook, incl. Mounting Material

Double Hook, incl. Mounting Material

Double hook for hanging e.g. open-end spanners, screwdrivers, etc. Distance between the hooks: 16 mm.
€12.90

incl. VAT plus shipping costs

Article No. 729846

Single Hook, Short, incl. Mounting Material

Single Hook, Short, incl. Mounting Material

Hook for hanging e.g. ring spanners. Two hooks mounted next to each other can be used to hold e.g. hammers.
€11.90

incl. VAT plus shipping costs

Article No. 729847

Hook, Short, incl. Mounting Material

Hook, incl. Mounting Material

Hook for hanging e.g. screwdrivers, pliers, etc. Two hooks mounted next to each other can be used to hold e.g. hammers.
variants
€14.90

incl. VAT plus shipping costs

Article No. 729848

Work Pad, Silicone, 480 x 300 mm

Work Pad, Silicone, 480 x 300 mm

This non-slip work pad made of robust silicone has given us the best results when sharpening with water and oil stones. The workplace in the kitchen or workshop remains dry and clean as the surrounding rim prevents the spread of excess...
€15.80

incl. VAT plus shipping costs

Article No. 703565

Magnetic Base Light, Flexible Gooseneck, LED

Magnetic Base Light, Flexible Gooseneck, LED

An indispensable workshop accessory that is used especially for intricate work with bandsaws, drills, edge sanders and lathes. A powerful switchable magnetic base and a long flexible neck allow you to position the light source...
€79.00

incl. VAT plus shipping costs

Article No. 715641

»Vice Rack Stop« Clamping Aid for Front Vice

»Vice Rack Stop« Clamping Aid for Front Vice

This practical clamping aid prevents front vices from jamming when clamping e.g. battens on one side. It keeps the jaws parallel when clamping and thus avoids the risk of damaging the workpiece or jaws. Simply take as many of the 2.5 mm...
€17.90

incl. VAT plus shipping costs

Article No. 715642

Spirit Lamp with Dial Regulator

Spirit Lamp with Dial Regulator

Glass container with dial regulator, 120 cm³ capacity, burning time approx. 2-3 hours. Can be set upright or at an angle due to its polygonal shape. Round wick, diameter 6 mm, with cap.
€16.90

incl. VAT plus shipping costs

Article No. 706013

Pantograph

Pantograph

The pantograph (Greek for «all-round writer«) transfers drawings, contours and profiles in the same, larger or smaller scale from the plan to the workpiece and thus saves a detour via computer or photocopier. With the help of the milled...
€37.80

incl. VAT plus shipping costs

Article No. 708095

Shaving Soap Dish with Lid

Shaving Soap Dish with Lid

Stainless steel shaving soap dish with high-gloss polished finish. The lid is not air sealed allowing the soap to dehumidify and it is also protected from dust and dirt. The easy-to-clean dish is only 85 g. Ø 90 mm. It accomodates our...
€21.30

incl. VAT plus shipping costs

Article No. 709197

Diamond Grinding Wheel Dresser

Diamond Grinding Wheel Dresser

This compact diamond grinding wheel dresser is used for trueing, cleaning and dressing silicon carbide and aluminium oxide grinding wheels of double-wheeled grinders. You simply place the tool on the tool rest and press it against the...
€18.30

incl. VAT plus shipping costs

Article No. 705259

Front Vice Guide, Heavy Cast Version

Front Vice Guide, Heavy Cast Version

The extremely robust and torsion-resistant vice mechanism is designed in such a way that even pressure is exerted over the entire width of the vice, even when you clamp workpieces in one jaw end only and with maximum pressure. This...
€198.00

incl. VAT plus shipping costs

Article No. 740224

Leather Roll-up Case for Folding Knives or Straight Razors

Leather Roll-up Case for Folding Knives or Straight Razors

Exclusive and space-saving, this roll-up case of fine brown calf leather provides safe and compact storage for folding knives or straight razors and is convenient for travellers to use. It is rolled and fastened with two leather straps...
€78.10

incl. VAT plus shipping costs

Article No. 709154

Step Wedges, 2-Piece Set

Step Wedges, 2-Piece Set

Metal wedges with steps on both sides to prevent the wedge from coming loose. For setting handles or subsequent diagonal wedging of axes and hatches. Length 37 mm, width 7-20 mm, thickness 5 mm.
€4.50

incl. VAT plus shipping costs

Article No. 714042

Standard Bench Vice

Standard Bench Vice

Metal vice with double guide tracks, trapezoidal thread and extendable bench dog. Screwed to the bottom of the bench plate (installation height 60 mm), jaw drill holes for fastening wooden blocks.
€64.90

incl. VAT plus shipping costs

Article No. 705768

Leather Sheath for Pruning Shears

Leather Sheath for Pruning Shears

Saddler quality, with belt loop.
€22.90

incl. VAT plus shipping costs

Article No. 718118

Multi-Angle Vice

Multi-Angle Vice

Light aluminium vice, rotatable in all directions, for light assembly or other tasks. Ball-joint with quick locking mechanism. Table clamp max. 53 mm.
€34.60

incl. VAT plus shipping costs

Article No. 705796

Insertion Clamp, Ø 30 mm

Insertion Clamp, Ø 30 mm

This clamp allows workpieces to be fastened in the centre of the worktop or at the front of the workbench. Made in cooperation with a German clamp manufacturer. Fits Ulmia workbenches and DICTUM Workbench »Allround 1700«.
€101.60

incl. VAT plus shipping costs

Article No. 706320

End Support for Front Vice Guide Rods

End Support for Front Vice Guide Rods

With an end support that connects the two guide rods of the front vice mechanism, you can precisely adjust the parallel position of the jaw to the bench apron. If the font vice warps, you can restore parallelism with the end support. You...
€39.70

incl. VAT plus shipping costs

Article No. 740223

Hold-down Clamp, Jaw Depth 100 mm, Ø 19-22 mm

Hold-down Clamp

Quickly fastens all types of workpieces to the joiner’s bench top. The rod of the cast ductile iron clamp is slipped into a drill hole, self-locking mechanism.
variants
€12.20

incl. VAT plus shipping costs

Article No. 705756

Patternmaker's Vice

Patternmaker's Vice

This multipurpose vice is the most versatile clamping tool on the workbench. The solid grey cast iron construction is equipped with a parallel guide for the jaws that rotate to allow the clamping of pieces of any shape without damaging...
€139.00

incl. VAT plus shipping costs

Article No. 705755

WoodStrapper

WoodStrapper

This tension belt makes woodsplitting safe and easy. Easy to fit via length-adjustable tensioning mechanism Split several small or individual large pieces of wood without the split pieces flying around Transport the split pieces...
€31.90

incl. VAT plus shipping costs

Article No. 714049

Parallel Marker

Parallel Marker

Ideal for marking built-in elements, joints, door casings, etc. Guide it along the reference surface and the adjustable pencil draws the marking line. Can also be used as a compass, thanks to the steel pin in the lower shaft. Plastic....
€9.90

incl. VAT plus shipping costs

Article No. 716152

Precious Wood Handle, Slim Drop-shaped Design, Ferrule Diameter 15 mm

Precious Wood Handles, Slim Drop-shaped Design

Patterned after old English models. Polished surface.
variants
€4.90

incl. VAT plus shipping costs

Article No. 701618