Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Spur Driver, #2 MT

Spur Driver, #2 MT

Standard spur driver for spindle turning.
€15.00

incl. VAT plus shipping costs

Article No. 714157

Washi Tape »Gold Tape UV 90«, 19 mm

Washi Tapes »Gold Tape UV 90«

Very thin and wet-strength adhesive tape made of Japanese Washi paper with specially formulated acrylate adhesive designed to perfectly suit the edges. High UV resistance Substrate-specific adhesive force Suitable for all kinds of...
variants
€2.70

(Content: €0.05 / 1 metre)

incl. VAT plus shipping costs

Article No. 820274

Plastic Pipette, 10-piece Set

Plastic Pipettes

Transparent pipettes for dosing dyes, additives, etc. With graduated scale in 0.5 ml divisions. Full content 3 ml, length 16 cm. One drop corresponds to approx. 0.04 g (water).
€3.50

incl. VAT plus shipping costs

Article No. 727642

Direct Collet #2 MT, 3 mm

Direct Collet #2 MT

Direct Collet #2 MT, ground, with thread M10 x 1.5 for drawbar.
variants
€15.30

incl. VAT plus shipping costs

Article No. 727653

Reducer Rings 20/10 mm, 1 pair

Reducer Rings, Pair

For reducing the bore diameter of grinding and polishing wheels. Made of plastic.
variants
€2.00

incl. VAT plus shipping costs

Article No. 729027

Faceplate, Ø 80 mm

Faceplate, Ø 80 mm

Faceplate made of steel with one ring of timber-mounting holes. For screwing on workpieces with larger diameters. For use with a 42 mm open-end wrench.
€53.80

incl. VAT plus shipping costs

Article No. 714156

Tool Rest 150 mm

Tool Rest

Suitable for all lathes with shaft diameter 25.4 mm (1 inch). Made of grey cast iron.
€25.30

incl. VAT plus shipping costs

Article No. 714158

Live centre, #2 MT

Live centre, #2 MT

Revolving lathe tip with point angle 60°.
€29.90

incl. VAT plus shipping costs

Article No. 714159

Replacement Blade for Sausage Slicer

Replacement Blade for Sausage Slicer

Fits the sausage slicer which comes with set No. 729465 , 729466 and 729467 .
€22.60

incl. VAT plus shipping costs

Article No. 729455

Replacement Blade for Cheese Slicer, Large

Replacement Blade for Cheese Slicer, Large

Fits the large cheese slicer which comes with set No. 729465 , 729466 and 729467 .
€22.60

incl. VAT plus shipping costs

Article No. 729464

Washi Tape »Strong Tape«, 25 mm

Washi Tapes »Strong Tape«

Very thin and wet-strength adhesive tape made of Japanese Washi paper with specially formulated acrylate adhesive designed to perfectly suit the edges. High UV resistance Substrate-specific adhesive force Suitable for all kinds of...
variants
€3.50

(Content: €0.07 / 1 metre)

incl. VAT plus shipping costs

Article No. 820277

Zebra »DelGuard« Mechanical Pencil, 0.5 mm

Zebra »DelGuard« Mechanical Pencil

Mechanical pencil with double spring mechanism. This ensures that the lead is held securely and offers protection against lead breakage whether held vertically or at an oblique angle when writing. The textured grip also makes writing...
variants
€6.99

incl. VAT plus shipping costs

Article No. 730760

Okatsune Flower Scissors

Okatsune Flower Scissors

These light and handy Japanese flower scissors with slim blades are perfect for harvesting and cutting vegetables, fruit and, of course, flowers. The blades are made of carbon steel, which takes on a fine sharpness and has a good...
€16.90

incl. VAT plus shipping costs

Article No. 718516

Buffalo Leather, Thickness 2.0-2.4 mm, Pre-cut Piece, Natural, 120 x 250 mm

Buffalo Leather, Thickness 2.0-2.4 mm, Half Hide, Natural

Buffalo leather belongs to the open, coarse-pored aniline leather types and is therefore robust and durable. Unlike normal cowhide, buffalo leather has distinctively coarser pores and is characterised by a typical grain structure in...
series
€6.30

incl. VAT plus shipping costs

Article No. 832286

French Scraper Blade, Rectangular, Thickness 0.25 mm

French Scraper Blades, Rectangular

Cold-rolled Made of spring steel
variants
€3.50

incl. VAT plus shipping costs

Article No. 703507

Scrapers, 4-Piece Set, Thickness 0.4 mm

Scrapers, 4-Piece Set

Cold-rolled Made of spring steel 1 piece each: rectangular 150 x 50 mm, convex/concave 140 x 50 mm, ball-shaped 140 x 70 mm, gooseneck 130 x 70 mm.
variants
€18.30

incl. VAT plus shipping costs

Article No. 703517

Kövulfix Contact Adhesive

Kövulfix Contact Adhesive

Professional solvent-based contact adhesive for use with leather. Adhesive achieves full strength after a single application of pressure Also suitable for rubber (soles, seals), rainwear, hard PVC and soft foam (polyurethane foam, carpet...
€5.80

(Content: €96.67 / 1 kg)

incl. VAT plus shipping costs

Article No. 451980

Diamond Saw File

Diamond Saw File

Saw file with wear-resistant, diamond-coated surface, ideal for very hard, tip-hardened teeth.
€36.90

incl. VAT plus shipping costs

Article No. 712802

Distance Bushings Manta, 4-Piece Set

Distance Bushings Manta, 4-Piece Set

Fits ballpoint pen sets Manta No. 730493 , 731493 , 730494 and 731494 .
€5.90

incl. VAT plus shipping costs

Article No. 702301

Glass Insert for Vases, Ø 25 mm

Glass Insert for Vases, Ø 25 mm

Glass insert for turned vases, with flared collar. Collar diameter 30 mm.
€3.30

incl. VAT plus shipping costs

Article No. 720532

MAG-ic Probe Thickness Gauge

MAG-ic Probe Thickness Gauge

A device for measuring thickness, can be operated by computer (Windows or Mac). Very easy operation with very reliable results. Downloadable software for thickness map creation, range 0-15 mm. Metric or inch units. Driver download, hints...
€419.00

incl. VAT plus shipping costs

Article No. 707144

Tanganryu Hocho, Maple, 2-Piece Set

Tanganryu Hocho, Maple

Square handle made of attractive maple wood, without rivets, surface lacquered.
series
 
€629.00

incl. VAT plus shipping costs

Article No. 709950

Liming Wax

Liming Wax

Pore-filling liming wax paste for coloured highlighting of exposed wood pores. The best results are achieved on coarse-pored woods such as ash or oak. Based on beeswax and carnauba wax.
€12.40

(Content: €33.07 / 1 litre)

incl. VAT plus shipping costs

Article No. 727640

SF Peening Machine

SF Peening Machine

The peening machine, manufactured by Schweiger Fulpmes from Tyrol, Austria, is ideal for shaping a variety of scythe blades. Thanks to the peening machine, tried-and-tested for decades and manufactured with the latest technology,...
€284.00

incl. VAT plus shipping costs

Article No. 705864

variants
€12.90

incl. VAT plus shipping costs

Article No. 832217

Small Entry-level Smoothing Plane, 150 mm

Small Entry-level Smoothing Plane

Small Japanese smoothing plane for beginners with a cutting edge of Blue Paper Steel. Body made of Japanese white oak. Comfortable handling due to small block size.
variants
 
€56.00

incl. VAT plus shipping costs

Article No. 704291

Cherry, 280 x 70 x 70 mm

Cherry, 280 x 70 x 70 mm

The medium-hard wood of the cherry tree is easy to work and is much sought-after by furniture makers. The steam heat treatment allows for stronger and more uniform colours and prevents wood from warping. The lighter sapwood offers an...
variants
€16.90

incl. VAT plus shipping costs

Article No. 727836

Chestnut Wood, 300 x 60 x 60 mm

Chestnut Wood, 300 x 60 x 60 mm

The chestnut is not originally a native plant of Germany. It was not until 1561, that the chestnut arrived in Prague from Constantinople and spread throughout Europe. Chestnut wood is used for furniture making, woodturning and carving....
variants
€6.90

incl. VAT plus shipping costs

Article No. 728887

€69.90

incl. VAT plus shipping costs

Article No. 728965

Ballpoint Pen Set Freya, Gold, 1 Piece

Ballpoint Pen Set Freya

High-quality twist ballpoint pen set made of brass, with break-proof clip. 24K gold coating. Refill with tungsten carbide ball, oil-based ink. For 7 mm drill diameter. German and English instructions available online.
variants
€12.90

incl. VAT plus shipping costs

Article No. 730736

Dovetail Marking Jig

Dovetail Marking Jig

This marking jig facilitates scribing dovetail joints. One side 1:5 (outside) and 1:6 (inside) for softwood, the other side 1:8 (outside) and 1:10 (inside) for hardwood.
€7.90

incl. VAT plus shipping costs

Article No. 715433

Bandsaw Blade with Toothed Back, 2305 mm x 8 mm, Tooth Spacing 6.35 mm

Bandsaw Blade with Toothed Back, 2305 mm x 8 mm, Tooth Spacing...

Special bandsaw blade for curved cuts, e.g. when cutting bowl blanks. Many woodturners who saw their bowl blanks from thick planks face a familiar problem: the back of the saw band jams on tighter radii. The additional toothing on the...
€34.90

incl. VAT plus shipping costs

Article No. 708787

Pruning Shears

Pruning Shears

Standard hand pruner for pruning shrubs and fruit trees. Excellent value for money. The fine carbon steel blades are very sturdy and hard, resulting in strong cutting edges. Blade with non-stick coating Hard-chromed counter blade,...
 
€19.90

incl. VAT plus shipping costs

Article No. 729692

Foot-operated Lever for SF Peening Machine

Foot-operated Lever for SF Peening Machine

The foot-operated lever replaces the hand-operated lever. Fits No. 705864 .
€72.90

incl. VAT plus shipping costs

Article No. 830539

Hemp Oil, 250 ml

Hemp Oil

Hemp oil is arguably one of the most environmentally friendly and gentle oil finishes available today. Our hemp oil is food safe and completely harmless, even for small children. In addition, hemp can grow in almost any part of the world...
variants
€12.90

(Content: €51.60 / 1 litre)

incl. VAT plus shipping costs

Article No. 721252

Digital Angle Gauge with Point Laser

Digital Angle Gauge with Point Laser

For fast and precise measurement of angles (°) and inclinations (%). An indispensable tool on the machine tables of bandsaws and column drill presses and when tilting circular saw blades. The integrated point laser offers a great...
€39.90

incl. VAT plus shipping costs

Article No. 707769

Kapitel Sägen

Kapitel Sägen

Vollsortimentskatalog in gedruckter Form. Jedes Kapitel umfasst das gesamte Sortiment aus dieser Kategorie.
variants
€0.00

incl. VAT Catalogue no. 99010130

Soloturn Bark Peeling Spud

Soloturn Bark Peeling Spud

Bark peeling spud in Soloturn design with ergonomic ash handle. Making it easy to debark and remove thin knots from medium and strong coniferous wood.
€71.90

incl. VAT plus shipping costs

Article No. 711673

Harvesting Sickle, Stainless Steel

Harvesting Sickle, Stainless Steel

Perfect for harvesting lettuce and vegetables. The sharp-toothed blade easily cuts any cabbage with little effort . Cutting edge made of corrosion-resistant stainless steel with additional crimp for increased dimensional stability. Long...
€34.90

incl. VAT plus shipping costs

Article No. 718559

Sharpening Jig for Leatherworking Tools

Sharpening Jig for Leatherworking Tools

The aluminium sharpening board with black anodised surface and leather honing strap keeps your leatherworking tools sharp. Suitable for a variety of tools, such as edge bevellers, French edgers, awls, leather knives, skiving knives,...
variants
€29.70

incl. VAT plus shipping costs

Article No. 745246

Torx Screws for Shinko Surface Planer Inserts, 10-piece Set

Torx Screws for Shinko Surface Planer Inserts, 10-piece Set

Torx screws for fastening the inserts to the cutterheads of Shinko surface and thickness planers. 10 pieces. Suitable for AH150/150s (Nos. 715478 , 715643 ), AH200/200s (Nos. 715479 , 715644 ) and DH330 (No. 715477 ).
€4.10

incl. VAT plus shipping costs

Article No. 930038

Mini Square, Walnut

Mini Square, Walnut

Walnut with brass fittings. Spring steel blade. With 45° mitre stop. Accuracy 0.1 mm per 100 mm.
€13.80

incl. VAT plus shipping costs

Article No. 731771

Bolster 16 x 24 mm, Brass, Blade Thickness 3.2 mm, V-shaped Slot

Bolster 16 x 24 mm, Brass, Blade Thickness 3.2 mm, V-shaped Slot

Bolster for the transition between handle and blade.
variants
€2.60

incl. VAT plus shipping costs

Article No. 716401

Bolster 16 x 24 mm, Brass, Blade Thickness 3.2 mm

Bolster 16 x 24 mm, Brass, Blade Thickness 3.2 mm

Bolster for the transition between handle and blade.
variants
€2.60

incl. VAT plus shipping costs

Article No. 716402

Bolster 18 x 27 mm, Bronze, Blade Thickness 3.2 mm

Bolster 18 x 27 mm, Bronze, Blade Thickness 3.2 mm

Bolster for the transition between handle and blade.
variants
€4.40

incl. VAT plus shipping costs

Article No. 716410

Kapitel Stemm- und Stecheisen

Kapitel Stemm- und Stecheisen

Vollsortimentskatalog in gedruckter Form. Jedes Kapitel umfasst das gesamte Sortiment aus dieser Kategorie.
variants
€0.00

incl. VAT Catalogue no. 99010131

Kapitel Hobel

Kapitel Hobel

Vollsortimentskatalog in gedruckter Form. Jedes Kapitel umfasst das gesamte Sortiment aus dieser Kategorie.
variants
€0.00

incl. VAT Catalogue no. 99010134