Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Spirit Lamp with Dial Regulator

Spirit Lamp with Dial Regulator

Glass container with dial regulator, 120 cm³ capacity, burning time approx. 2-3 hours. Can be set upright or at an angle due to its polygonal shape. Round wick, diameter 6 mm, with cap.
€16.90

incl. VAT plus shipping costs

Article No. 706013

Patternmaker's Vice

Patternmaker's Vice

This multipurpose vice is the most versatile clamping tool on the workbench. The solid grey cast iron construction is equipped with a parallel guide for the jaws that rotate to allow the clamping of pieces of any shape without damaging...
€139.00

incl. VAT plus shipping costs

Article No. 705755

French Spring Dividers, Shaft Length 150 mm

French Spring Dividers

Elegant French spring dividers made of gunmetal finished steel, with hardened points, quick-acting screws.
variants
€23.50

incl. VAT plus shipping costs

Article No. 707150

€3.90

incl. VAT plus shipping costs

Article No. 701604

variants
€19.10

incl. VAT plus shipping costs

Article No. 903712

Wing Divider »L'Arc«, Two Tips

Wing Dividers »L'Arc«

Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild along with the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
variants
€44.90

incl. VAT plus shipping costs

Article No. 707376

Tailpiece, French Model, Ebony, Cello 4/4, 235 mm

Tailpiece, French Model, Ebony, Cello 4/4, 235 mm

Elegant, lightweight ebony tailpiece with four integrated adjusters. Endloop not included.
€158.00

incl. VAT plus shipping costs

Article No. 388035

Knurled Nut for Multifunction Bench Dogs MBH20

Knurled Nut for Multifunction Bench Dogs MBH20

The 20 mm centring projection on the knurled nut allows it to be centred quickly and precisely in the holes of the plate. This ensures that the 8 mm thread is always in the middle of the hole and makes it easier to insert and screw on...
€5.20

incl. VAT plus shipping costs

Article No. 728991

variants
€3.70

incl. VAT plus shipping costs

Article No. 487061

Nitrile Gloves, Black, Size M

Nitrile Gloves, Black

These disposable nitrile gloves are ideal for contact with food. They do not release harmful substances or even change the taste or smell of the food. The significantly thinner wall thickness of the gloves not only optimises the fit, but...
variants
€7.40

incl. VAT plus shipping costs

Article No. 700134

Tools for Marking and Checking, Wooden Case, 2-piece Set

Tools for Marking and Checking, Wooden Case, 2-piece Set

This set masters demanding testing and marking tasks with the highest accuracy. The handy precision square is excellent for checking the squareness of accurately planed workpieces, for setting the tool height on the machine table and for...
€152.00

incl. VAT plus shipping costs

Article No. 730884

»Nagare« Wind Chime, Gold

»Nagare« Wind Chime, Gold

In Japanese mythology, »Nagare« embodies the unstoppable flowing movement and symbolises the power of water.
€9.50

incl. VAT plus shipping costs

Article No. 714828

»Mizu no shizuku« Wind Chime, Blue

»Mizu no shizuku« Wind Chime, Blue

»Mizu no Shizuku«: the gentle blue drops of water, a symbol of purity in Japanese mythology.
€9.90

incl. VAT plus shipping costs

Article No. 714829

»Tsurigane« Wind Chime, Green

»Tsurigane« Wind Chime, Green

Surface decorated in the style of a Buddhist temple bell and covered with a soft green patina.
€9.90

incl. VAT plus shipping costs

Article No. 714825

»Momiji« Wind Chime, Bronze

»Momiji« Wind Chime

In Japanese mythology, »Momiji« refers to the maple tree whose leaves glow with vibrant colours in autumn: a symbol of autumn and its beauty.
variants
€10.80

incl. VAT plus shipping costs

Article No. 714826

French Spring Dividers with Pencil Holder, Shaft Length 150 mm

French Spring Dividers with Pencil Holder

Elegant French spring dividers made of gunmetal finished steel, with hardened tips, quick-acting screws.
variants
€32.50

incl. VAT plus shipping costs

Article No. 707151

Pantograph

Pantograph

The pantograph (Greek for «all-round writer«) transfers drawings, contours and profiles in the same, larger or smaller scale from the plan to the workpiece and thus saves a detour via computer or photocopier. With the help of the milled...
€37.80

incl. VAT plus shipping costs

Article No. 708095

Shaving Soap Dish with Lid

Shaving Soap Dish with Lid

Stainless steel shaving soap dish with high-gloss polished finish. The lid is not air sealed allowing the soap to dehumidify and it is also protected from dust and dirt. The easy-to-clean dish is only 85 g. Ø 90 mm. It accomodates our...
€21.30

incl. VAT plus shipping costs

Article No. 709197

Diamond Grinding Wheel Dresser

Diamond Grinding Wheel Dresser

This compact diamond grinding wheel dresser is used for trueing, cleaning and dressing silicon carbide and aluminium oxide grinding wheels of double-wheeled grinders. You simply place the tool on the tool rest and press it against the...
€18.30

incl. VAT plus shipping costs

Article No. 705259

Front Vice Guide, Heavy Cast Version

Front Vice Guide, Heavy Cast Version

The extremely robust and torsion-resistant vice mechanism is designed in such a way that even pressure is exerted over the entire width of the vice, even when you clamp workpieces in one jaw end only and with maximum pressure. This...
€198.00

incl. VAT plus shipping costs

Article No. 740224

Leather Roll-up Case for Folding Knives or Straight Razors

Leather Roll-up Case for Folding Knives or Straight Razors

Exclusive and space-saving, this roll-up case of fine brown calf leather provides safe and compact storage for folding knives or straight razors and is convenient for travellers to use. It is rolled and fastened with two leather straps...
€78.10

incl. VAT plus shipping costs

Article No. 709154

Step Wedges, 2-Piece Set

Step Wedges, 2-Piece Set

Metal wedges with steps on both sides to prevent the wedge from coming loose. For setting handles or subsequent diagonal wedging of axes and hatches. Length 37 mm, width 7-20 mm, thickness 5 mm.
€4.50

incl. VAT plus shipping costs

Article No. 714042

Boxwood Handle, Ball-Shaped, Ferrule Diameter 18 mm

Boxwood Handles, Ball-Shaped

Polished boxwood, solid ferrule.
variants
€4.80

incl. VAT plus shipping costs

Article No. 701601

Standard Bench Vice

Standard Bench Vice

Metal vice with double guide tracks, trapezoidal thread and extendable bench dog. Screwed to the bottom of the bench plate (installation height 60 mm), jaw drill holes for fastening wooden blocks.
€64.90

incl. VAT plus shipping costs

Article No. 705768

Leather Sheath for Pruning Shears

Leather Sheath for Pruning Shears

Saddler quality, with belt loop.
€22.90

incl. VAT plus shipping costs

Article No. 718118

Multi-Angle Vice

Multi-Angle Vice

Light aluminium vice, rotatable in all directions, for light assembly or other tasks. Ball-joint with quick locking mechanism. Table clamp max. 53 mm.
€34.60

incl. VAT plus shipping costs

Article No. 705796

Insertion Clamp, Ø 30 mm

Insertion Clamp, Ø 30 mm

This clamp allows workpieces to be fastened in the centre of the worktop or at the front of the workbench. Made in cooperation with a German clamp manufacturer. Fits Ulmia workbenches and DICTUM Workbench »Allround 1700«.
€101.60

incl. VAT plus shipping costs

Article No. 706320

End Support for Front Vice Guide Rods

End Support for Front Vice Guide Rods

With an end support that connects the two guide rods of the front vice mechanism, you can precisely adjust the parallel position of the jaw to the bench apron. If the font vice warps, you can restore parallelism with the end support. You...
€39.70

incl. VAT plus shipping costs

Article No. 740223

Hold-down Clamp, Jaw Depth 100 mm, Ø 19-22 mm

Hold-down Clamp

Quickly fastens all types of workpieces to the joiner’s bench top. The rod of the cast ductile iron clamp is slipped into a drill hole, self-locking mechanism.
variants
€12.20

incl. VAT plus shipping costs

Article No. 705756

WoodStrapper

WoodStrapper

This tension belt makes woodsplitting safe and easy. Easy to fit via length-adjustable tensioning mechanism Split several small or individual large pieces of wood without the split pieces flying around Transport the split pieces...
€31.90

incl. VAT plus shipping costs

Article No. 714049

Parallel Marker

Parallel Marker

Ideal for marking built-in elements, joints, door casings, etc. Guide it along the reference surface and the adjustable pencil draws the marking line. Can also be used as a compass, thanks to the steel pin in the lower shaft. Plastic....
€9.90

incl. VAT plus shipping costs

Article No. 716152

Precious Wood Handle, Slim Drop-shaped Design, Ferrule Diameter 15 mm

Precious Wood Handles, Slim Drop-shaped Design

Patterned after old English models. Polished surface.
variants
€4.90

incl. VAT plus shipping costs

Article No. 701618

Setscrew for Vice Jaw

Setscrew for Vice Jaw

A setscrew inside the vice allows counterpressure when clamping one side only and prevents the jaw from tilting.
€21.90

incl. VAT plus shipping costs

Article No. 740222

Leather Case for Razor, Black

Leather Case for Razor, Black

High quality calf leather case with leather tongue closing. Fits all Thier Issard Razors. Ideal for travelling.
variants
€16.40

incl. VAT plus shipping costs

Article No. 709332

Alum Crystal Shaving Block

Alum Crystal Shaving Block

Shaving and disinfection block of pure alum (a type of aluminium sulphate) for small wounds caused by shaving. Haemostatic, astringent and antiseptic effect. When dissolved with water on the skin, alum disinfects and closes wounds. To do...
€18.70

(Content: €187.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 709195

Wax Polish

Wax Polish

This Wax Polish protects plane soles made of steel and other flat surfaces from rust and at the same time reduces friction. Equally suited for cast iron, steel and iron. It also inhibits the tarnishing of polished copper, brass and...
€16.90

(Content: €169.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 705484

Handle for Pfeil and Herdim Knives, for Blade Width 3.5 mm

Handle for Pfeil and Herdim Knives

Made of precious wood. Naturally treated, polished surfaces. Central screw for securing and adjusting the blade.
variants
€7.30

incl. VAT plus shipping costs

Article No. 700380

€7.90

incl. VAT plus shipping costs

Article No. 707146

Square Bench Dogs, 1 pair

Square Bench Dogs, 1 pair

Aluminium bench dogs with steel pressure spring for fixing at the required height. Fits DICTUM workbenches »Allround 1700« und »Deluxe 2000«.
€73.40

incl. VAT plus shipping costs

Article No. 706321

Spirit Lamp

Spirit Lamp

Glass container, 120 ccm capacity, burning time ca. 2-3 hours. Can be set upright or at an angle due to the polygonal base. 120 ccm capacity, round wick Ø 12 mm, with cap.
€19.90

incl. VAT plus shipping costs

Article No. 706008

Bench Wrench

Bench Wrench

Fits DICTUM workbenches and Lie-Nielsen vice mechanisms. Maple handle rod, red beech knobs.
€7.60

incl. VAT plus shipping costs

Article No. 706340

Case for Machete

Case for Machete

Fits No. 705666 .
€34.40

incl. VAT plus shipping costs

Article No. 702998

Replacement Blades for Scraper

Replacement Blades for Scraper

One pair, fits No. 703232 .
€8.20

incl. VAT plus shipping costs

Article No. 703233

€19.90 €17.90

incl. VAT plus shipping costs

Article No. 707991