Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.

Scissor-Shaped Soundpost Setter, Violin, Viola

Made of brass.

€6.10

incl. VAT plus shipping costs

Article No. 700105

See details

Soundpost Retrievers

For removing loose soundposts.

€20.80

incl. VAT plus shipping costs

Article No. 700108

See details

Violin Maker’s Knife Kogatana, 6 mm, Left Bevel

Violin Maker’s Knives Kogatana

Violin maker’s knives, beveled for right-hander´s use. The well known Kogatana knives consist from two layers of carbon steel. While the lower cutting layer is hardened to 58 HRC, the upper softer layer secures the stability of the blade...

€29.00

incl. VAT plus shipping costs

Article No. 700368

See details

Violin Maker’s Knives Kogatana, 6-Piece Set

Kogatana double layered knives with different bevels. Versatile tools for daily violin maker’s duty. Comes pre-sharpened, with hollow-ground back for easy re-sharpening, in a cotton tool roll. Japanese ash handle. Bevel: Left 25° Right...

€129.40

incl. VAT plus shipping costs

Article No. 700379

See details

Purfling Channel Cleaner

Hardened tool steel blade with hardwood handle.

€11.90

incl. VAT plus shipping costs

Article No. 700606

See details

Diamond Sanding Sheet, 150 x 75 mm, Self-Adhesive

Thin steel sheet covered with diamond powder with self-adhesive back for easy attachment to sanding blocks. For sanding of hardwood fingerboards.

€24.80

incl. VAT plus shipping costs

Article No. 704969

See details

Edge Clamp

Brass, finely machined.

€10.50

incl. VAT plus shipping costs

Article No. 705856

See details

Aluminium Repair Clamps

Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.

€18.90

incl. VAT plus shipping costs

Article No. 705890

See details

Scale and Projection Gauge, Violin 4/4

A handsome gauge for quick and easy check of principal dimensions on the violin, checks the proper scale length and fingerboard projection. Both vital dimensions for playability of a violin. Useful for both teachers for checking an...

€9.50

incl. VAT plus shipping costs

Article No. 707009

See details

Pen Blank 15°, 4 Types of Wood

Glue-laminated blank, cut at a 15° angle. Laminated from four European woods: walnut, cherry, elm, ash. For making ball pens, fountain pens or small turned objects.

€6.50

incl. VAT plus shipping costs

Article No. 730474

See details

Shiro Kamo Hocho, Santoku (all-purpose knife)

The smith Shiro Kamo crafts his blades in the Takefu Knife Village. This is a smithy cooperative that has upheld the tradition of sophisticated metalworking for almost 700 years. The individual Japanese kitchen knives are crafted by...

€144.00

incl. VAT plus shipping costs

Article No. 719882

See details

Mosaic Pin, Copper, Ø 4.8 mm, No. 11

Length 100 mm.

€10.50

incl. VAT plus shipping costs

Article No. 830910

See details

Short Multipurpose Twist Drills

This multipurpose twist drill is a real problem solver. Thanks to the heat resistant HSS it can be used for a wide range of materials. The drill has a parabolic flute design which provides good swarf control. It can be used for many...

€6.20

incl. VAT plus shipping costs

Article No. 718510

See details

Pen Blank, Cherry, 650 mm

Measuring 650 mm in length, these blanks can be used to manufacture ballpoint pens, fountain pens and handles for letter openers and magnifying glasses.

€5.70

incl. VAT plus shipping costs

Article No. 730483

See details

Pen Blank, Walnut , 650 mm

Measuring 650 mm in length, these blanks can be used to manufacture ballpoint pens, fountain pens and handles for letter openers and magnifying glasses.

€6.60

incl. VAT plus shipping costs

Article No. 730485

See details

Camel Thorn, 380 x 38 x 38 mm

The camel thorn tree is an acacia species common to southern Africa. Due to the slow growth of the tree, the annual rings are close to each other. The wood is hard and robust and is therefore ideal for turned items. Density 1185 kg/m³

€23.50

incl. VAT plus shipping costs

Article No. 831758

See details

European Walnut, 300 x 40 x 40 mm

Walnut is a much sought-after precious wood due to its aesthetic dark brown colour and vivid grain. Its appearance and its medium density makes it ideal for woodturning as well as for making musical instruments, high-grade furniture,...

€2.60

incl. VAT plus shipping costs

Article No. 832016

See details

Apple, 300 x 40 x 40 mm

Apple wood fascinates with its reddish-brown colour and its light-coloured sapwood. This finely pored, hard, often irregularly grained wood is easy to work. It is widely used for high-grade furniture making, woodturning and carving....

€3.40

incl. VAT plus shipping costs

Article No. 832021

See details

Pear, 300 x 40 x 40 mm

The wood of the pear tree shows an even, fine-pored wood structure and is easy to work with. Its striking reddish colour makes it popular for furniture making. Thanks to its fine structure and hardness, it is also suitable for...

€2.60

incl. VAT plus shipping costs

Article No. 832026

See details

Spalted Birch, 300 x 60 x 60 mm

Spalted birch is very different from conventional birch wood due to its remarkably strong grain caused by fungal infestation. It features remarkable brown to black-white spots. Spalted birch wood is ideal for woodturning and polishes...

€15.60

incl. VAT plus shipping costs

Article No. 832043

See details

Herdim F-Hole Flap Lifter

Special spreading tool for lifting and repairing damaged f-hole flaps (fits through the f-hole). Can also be used to measure sound post length.

€9.50

incl. VAT plus shipping costs

Article No. 703203S

See details

Entry-level Smoothing Planes

Japanese smoothing plane for beginners with a cutting edge of Blue Paper Steel. Body made of Japanese white oak.

€69.00

incl. VAT plus shipping costs

Article No. 703981

See details

Block Plane

Indonesian redwood body, HSS blade with chipbreaker, no wedge. Also ideal when working with leather, e.g. to sharpen leather edges.

€41.90

incl. VAT plus shipping costs

Article No. 703276

See details

Traditional English Marking Gauge with Micro Adjust

Precisely manufactured marking gauge from England with two scribe needles, one separately adjustable via setscrew. The thread of the setscrew allows precise adjustment. This results in high repetition accuracy and saves time when...

€64.40

incl. VAT plus shipping costs

Article No. 707864

See details

Gilding Milk, 150 ml

Special glue for gilding with metal leaf. The glue is applied with a brush. Allow to dry after applying, then place the metal leaf on top and rub down firmly. The glue is also suitable for curved and round surfaces. For indoor use.

€4.90

(Content: €32.67 / 1 litre)

incl. VAT plus shipping costs

Article No. 727636

See details

Metal Leaf, 140 x 140 mm, 25-Piece Set, Silver

Wood, paper, etc. can be finished with wafer-thin impact metal leaf. It can be applied continuously or for individual decoration. Simply coat the substrate with Gilding Milk No. 727636 , let it dry and apply the metal leaf, rubbing down...

€6.90

incl. VAT plus shipping costs

Article No. 727632

See details

Twist Drill »Speed«, Metal

High-quality spiral drill bits with fast feed. Made of high quality HSS Point angle of 130° Resistant, easy-to-sharpen cone-shaped grind Type N with 20-30° helix angle for hard materials Milled from solid material (ground drill) Suitable...

€0.60

incl. VAT plus shipping costs

Article No. 718600

See details

Desert Ironwood, Pen Blank, 125 x 24 x 24 mm

Because of its slow growth, desert ironwood is one of the hardest and densest woods in the world. It is golden brown with dark streaks and a yellowish sapwood and grows predominantly in the deserts of Arizona and California, USA as well...

€16.90

incl. VAT plus shipping costs

Article No. 832226

See details

Acrylic Pen Blank, Iced Strawberry

Ideal for writing utensils and minor turning work. Since acrylic has good stability, it can be processed without a sleeve if the thickness is suitable.

€5.90 €5.30

incl. VAT plus shipping costs

Article No. 831793

See details

Ebony, 2nd Quality, 300 x 30 x 30 mm

Ebony, one of the hardest, densest woods in the world, is often used in turnery, cabinet making, restoration work and musical instrument making for parts which need to either be particularly beautiful or resistant to wear, e.g. keys,...

€12.90

incl. VAT plus shipping costs

Article No. 831924

See details

Calliper in Card Format

Extra-thin stainless steel calliper in credit card format for on-the-go. Fits in any wallet or jacket pocket and is always to hand. Deep-etched scale with 0.05 mm vernier. A copy of this tool has been added to the collection of the...

€16.90

incl. VAT plus shipping costs

Article No. 718067

See details

»Amakusa« Japanese Natural Sharpening Stone

Medium fine lime sandstone from the Kumamoto/Sage region with a dense structure and even grain for intermediate grinding.

€39.90

incl. VAT plus shipping costs

Article No. 711688

See details

One-handed Edge Clamp

Practical edge clamp for easy application of edging on large workpieces and inside and outside radii. It even makes laminating using templates easy without help from others. The non-slip jaws even remain in contact with ultra-smooth...

€62.30

incl. VAT plus shipping costs

Article No. 705857

See details

Australian Precious Wood, Square Timber, Length 120 mm, Red...

Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.

€19.80

incl. VAT plus shipping costs

Article No. 831330

See details

Slick

Slick for making beam joints and for finishing work. Double-layered, well-proportioned blade with a cutting edge of White Paper Steel. Handle made of Japanese red oak.

€273.00

incl. VAT plus shipping costs

Article No. 710802

See details

Revolving Punch Pliers

For punching leather, cardboard, rubber, plastic etc. Six punches with diameters of 2 / 2.5 / 3 / 3.5 / 4 and 4.5 mm. The diameter is displayed in the view window. Pressed, anti-skid corded steel shanks with stop. 270 g.

€15.90

incl. VAT plus shipping costs

Article No. 711995

See details

Pen Blank, Birch, 125 mm

Blanks for making ball pens, fountain pens or small turned objects.

€1.40

incl. VAT plus shipping costs

Article No. 730460

See details

Marking Knife »Kogatana« Standard, Left bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.

€27.90

incl. VAT plus shipping costs

Article No. 710304

See details

Marking Knife »Kogatana« Standard, Right bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.

€19.90

incl. VAT plus shipping costs

Article No. 710404

See details

Adjustable Wood Drill Bit

Wood drill bit for brace, seamlessly adjustable from Ø 22 mm to Ø 76 mm via two sliding cutters. Shaft suitable for three-jaw chuck. For drilling in softwood, universal for all diameters and intermediate sizes.

€34.90

incl. VAT plus shipping costs

Article No. 707181

See details

Bone Plate, 55 x 18 x 2 mm

For making knife handle scales, inlays, jewellery and as a replacement for elephant ivory. Hard and resistant to wear, easy to sand and finish. Made from thick-walled, sterilized water buffalo bones.

€5.30

incl. VAT plus shipping costs

Article No. 831155

See details

Ginkgo Cutting Board

Tough but not too hard, easy on knife cutting edges, good looking and antibacterial, ginkgo is an ideal wood for cutting boards. This solid board is made of non-glued, air-dried Japanese ginkgo, with a planed and untreated surface.

€79.00

incl. VAT plus shipping costs

Article No. 706028

See details

Handiwork Metal 150

Fine saw for non-hardened metals and hard plastics. The rubber handle provides a comfortable and secure grip. Replaceable blade. Can also be used with blade for wood (No. 712716 ).

€18.50

incl. VAT plus shipping costs

Article No. 712715

See details

Australian Precious Wood, Square Timber, Length 300 mm, Red...

Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.

€47.90

incl. VAT plus shipping costs

Article No. 831120

See details

Filter Paper „Miyoshinogami”, 10-Piece Set

This filter paper is used to filter expensive lacquers before use or after adding pigments, to avoid lumps and impurities in the lacquer later. To use it, you lay several sheets of paper (5-10) on top of each other and pour in the...

€5.40

incl. VAT plus shipping costs

Article No. 716313

See details