Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Bindings, Walnut, 2 pcs

Bindings, Walnut, 2 pcs

Set consists of two strips, each one: 800 mm long 2.1 mm wide 6.0 mm high
€11.40

incl. VAT plus shipping costs

Article No. 487080

Purfling, Maple, Black/White/Black, 2 pcs

Purfling, Maple

Handmade, coloured 3-layer wooden strips, worked up with a special glue. Set consists of two strips, each one : 800 mm long 1.5 mm wide 1.5 mm high
variants
€2.30

incl. VAT plus shipping costs

Article No. 487076

Herringbone Purfling, Straight, 2 pcs

Herringbone Purfling, Straight, 2 pcs

Set consists of two strips, each one : 800 mm long 3.3 mm wide 2.5 mm high
€11.40

incl. VAT plus shipping costs

Article No. 487081

Glue Application Set

Glue Application Set

The open glue tray simplifies mixing or diluting of adhesives and easy glue pick-up by brush or glue comb. Small workpieces can also be dipped directly into the glue. The two brush heads made of silicone rubber have a width of 15 and 30...
€26.50

incl. VAT plus shipping costs

Article No. 714607

Leather Reinforced Cotton Polishing Disc, Yellow

Leather Reinforced Cotton Polishing Disc, Yellow

Cotton disc, triple-stitched, with leather reinforcement. For mirror polishing with polishing pastes. For tapered polishing disc mounts.
variants
€3.50

incl. VAT plus shipping costs

Article No. 730548

Rubberised Magnet for Water Container

Rubberised Magnet for Water Container

This magnet with rubber coat can be put into the water container of any water-cooled grinder. The removed metal particles adhere to the magnet and thus no longer contaminate the cooling water. The magnet can then be easily removed from...
€4.90

incl. VAT plus shipping costs

Article No. 714569

Gum Rosin, 250 g

Gum Rosin

Gum resin, rosin or gum rosin, is a natural, vegetable-based raw material that was already being used by the ancient Romans and Egyptians. It is a hard, acidic diterpene resin extracted from pine wood. Our pure and light gum resin is...
variants
€9.90

(Content: €39.60 / 1 kg)

incl. VAT plus shipping costs

Article No. 450341

Diamond Honing Plate, 400/1000

Diamond Honing Plates

Double-sided mini diamond plates for whetting, polishing and honing. Compact, light and flexible. For chamfering fret ends and levelling frets, especially on small plucked instruments, such as mandolins and ukuleles. 100 x 30 x 1 mm
variants
€16.40

incl. VAT plus shipping costs

Article No. 704954

Micro Chisel, 2.2 mm

Micro Chisel

For deburring grooves on bridges and saddles as well as for cleaning and removing e.g. residual dried glue. The long neck also allows working in deeper areas. HSS
variants
€44.60

incl. VAT plus shipping costs

Article No. 700629

variants
€4.20

incl. VAT plus shipping costs

Article No. 735662

Hose Reduction, Ø 100/50 mm

Hose Reduction

Connecting element for two hose or pipelines of different diameters, or for connecting a hose or pipeline with suction nozzles of different diameters.
variants
€7.30

incl. VAT plus shipping costs

Article No. 727651

»Satsuki« Bonsai Shears, 180 mm

»Satsuki« Bonsai Shears

Due to their narrow cutting edge, the Japanese »Satsuki« scissors are ideal for pruningback, trimming thinner branches, thinning out, and removing azalea seed stems.
variants
 
€32.30

incl. VAT plus shipping costs

Article No. 718565

Madder Lake from Roots, red, 50 g

Madder Lake from Roots

Natural colour pigments obtained from the madder root (Rubia tinctoria). An indispensable natural dye for violin varnishes. It is a natural product, therefore the colour may vary slightly depending on the batch.
variants
€66.70

(Content: €1,334.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 450104

Madder Lake from Roots, Bordeaux Red, 5 g

Madder Lake from Roots

Natural colour pigments obtained from the madder root (Rubia tinctoria). An indispensable natural dye for violin varnishes. It is a natural product, therefore the colour may vary slightly depending on the batch.
variants
€11.30

(Content: €2,260.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 450106

Madder Lake from Roots, Orange, 5 g

Madder Lake from Roots

Natural colour pigments obtained from the madder root (Rubia tinctoria). An indispensable natural dye for violin varnishes. It is a natural product, therefore the colour may vary slightly depending on the batch.
variants
€24.30

(Content: €4,860.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 450107

Madder Lake from Roots, Violet, 5 g

Madder Lake from Roots

Natural colour pigments obtained from the madder root (Rubia tinctoria). An indispensable natural dye for violin varnishes. It is a natural product, therefore the colour may vary slightly depending on the batch.
variants
€17.90

(Content: €3,580.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 450109

Insert Sleeve for »Profi« Dowel Cutter, Ø 15 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714444

Insert Sleeve for »Profi« Dowel Cutter, Ø 18 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714446

Insert Sleeve for »Profi« Dowel Cutter, Ø 12 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714442

Insert Sleeve for »Profi« Dowel Cutter, Ø 16 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714445

Insert Sleeve for »Profi« Dowel Cutter, Ø 8 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714440

Insert Sleeve for »Profi« Dowel Cutter, Ø 10 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714441

Insert Sleeve for »Profi« Dowel Cutter, Ø 25 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714449

Insert Sleeve for »Profi« Dowel Cutter, Ø 20 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714448

Insert Sleeve for »Profi« Dowel Cutter, Ø 19 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714447

Insert Sleeve for »Profi« Dowel Cutter, Ø 13 mm

Insert Sleeve for »Profi« Dowel Cutters

Made of aluminium. Insert sleeves for other diameters available on request.
variants
€59.00

incl. VAT plus shipping costs

Article No. 714443

Oblong Hole Punch, 20 x 4 mm

Oblong Hole Punches

Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€69.00

incl. VAT plus shipping costs

Article No. 729499

Oblong Hole Punch, 16 x 3 mm

Oblong Hole Punches

Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€53.00

incl. VAT plus shipping costs

Article No. 729496

Oblong Hole Punch, 17 x 11 mm

Oblong Hole Punches

Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€55.60 €47.50

incl. VAT plus shipping costs

Article No. 729497

Oblong Hole Punch, 32 x 5 mm

Oblong Hole Punches

Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€119.00

incl. VAT plus shipping costs

Article No. 729501

Oblong Hole Punch, 12 x 3 mm

Oblong Hole Punches

Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€48.90

incl. VAT plus shipping costs

Article No. 729495

Arc Punch, Ø 30 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€33.40

incl. VAT plus shipping costs

Article No. 729483

Arc Punch, Ø 25 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€24.80

incl. VAT plus shipping costs

Article No. 729482

Arc Punch, Ø 14 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€10.40

incl. VAT plus shipping costs

Article No. 729479

Arc Punch, Ø 16 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€12.70

incl. VAT plus shipping costs

Article No. 729480

Arc Punch, Ø 12 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€8.90

incl. VAT plus shipping costs

Article No. 729478

Arc Punch, Ø 20 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€17.60

incl. VAT plus shipping costs

Article No. 729481

Arc Punch, Ø 10 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€7.40

incl. VAT plus shipping costs

Article No. 729477

Arc Punch, Ø 8 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€6.40

incl. VAT plus shipping costs

Article No. 729476

Pferd Abrasive Spiral Bands, Ø 38 x 25 mm, Grit 150

Pferd Abrasive Spiral Bands, Ø 38 x 25 mm

Abrasive spiral bands in the corundum A version suitable for universal use from coarse to fine grinding. Fits No. 729571 .
variants
€1.00

incl. VAT plus shipping costs

Article No. 729573

Fingerboard, Indian Ebony, Bass 4/4 Round, Quality ***

Fingerboards for Repair, Indian Ebony, Quality ***

These fingerboards have a larger overlap in order to fit any possible proportion and dimensions in the restoration and repair area. Deep black Indian ebony High density, no pores, no stain Straight grain Ideal for repairs
variants
€234.00

incl. VAT plus shipping costs

Article No. 390033

Fingerboard, Indian Ebony, Bass 3/4 Round, Quality ***

Fingerboards for Repair, Indian Ebony, Quality ***

These fingerboards have a larger overlap in order to fit any possible proportion and dimensions in the restoration and repair area. Deep black Indian ebony High density, no pores, no stain Straight grain Ideal for repairs
variants
€229.00

incl. VAT plus shipping costs

Article No. 390034

D-Kumi Nomi, Chisel, Blade Width 6 mm

D-Kumi Nomi, Chisel

These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
variants
 
€42.00

incl. VAT plus shipping costs

Article No. 710471

D-Kumi Nomi, Chisel, Blade Width 24 mm

D-Kumi Nomi, Chisel

These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
variants
 
€60.70

incl. VAT plus shipping costs

Article No. 710476

D-Kumi Nomi, Chisel, Blade Width 18 mm

D-Kumi Nomi, Chisel

These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
variants
 
€52.80

incl. VAT plus shipping costs

Article No. 710475

D-Kumi Nomi, Chisel, 6-Piece Set

D-Kumi Nomi, Chisel

These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
variants
 
€326.50

incl. VAT plus shipping costs

Article No. 710480

D-Kumi Nomi, Chisel, Blade Width 30 mm

D-Kumi Nomi, Chisel

These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
variants
 
€64.30 €54.50

incl. VAT plus shipping costs

Article No. 710477

D-Kumi Nomi, Chisel, Blade Width 9 mm

D-Kumi Nomi, Chisel

These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
variants
 
€42.00

incl. VAT plus shipping costs

Article No. 710472