Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Magnetic Wristband

Magnetic Wristband

Ideal for demanding assembly work . Strong magnets built into the wristband hold screws, nails, drills, bits and small tools ready to hand on the wrist . A small pocket holds non-magnetic parts. Practical hook-and-loop closure for easy...
€9.80 €7.50

incl. VAT plus shipping costs

Article No. 708939

Anvil Horn

Anvil Horn

Anvil horn for use with a standard anvil with square hardy hole 25 x 25 mm. The anvil horn is used to make eyelets, eyes, rings, bends and various flourishes. Diameter at the bottom of the horn: 50 mm; Height of the conical horn: 150 mm;...
€49.90

incl. VAT plus shipping costs

Article No. 745232

Riveting Hammer, Lower Part

Riveting Hammer, Lower Part

Straight anvil insert for forging attachments such as knife tangs. The lower part of the riveting hammer enables very precise work. Depending on the shape of the riveting hammer surface, different workpiece shapes can be achieved. The...
€59.00

incl. VAT plus shipping costs

Article No. 745237

Anvil Hardy

Anvil Hardy

The hardy is used to remove excess material from the red-hot workpiece. For use with a standard anvil with square hardy hole 25 x 25 mm. Edge width: 50 mm; Total height: 150 mm.
€49.90

incl. VAT plus shipping costs

Article No. 745233

Planishing Hammer, Upper Part

Planishing Hammer, Upper Part

In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€89.90

incl. VAT plus shipping costs

Article No. 745234

Planishing Hammer, Lower Part

Planishing Hammer, Lower Part

In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€69.90

incl. VAT plus shipping costs

Article No. 745235

Riveting Hammer, Upper Part

Riveting Hammer, Upper Part

Straight riveting hammer for forging attachments such as knife tangs. The riveting hammer enables very precise work. Depending on the shape of the riveting hammer face and its lower part, different workpiece shapes can be achieved....
€89.00

incl. VAT plus shipping costs

Article No. 745236

Wing Divider, Polished Stainless Steel

Wing Divider, Polished Stainless Steel

Marking divider made of polished stainless steel, for parallel marking, transferring measurements, dividing distances or marking circles on leather. Maximum opening: 100 mm, shaft length: 70 mm.
€22.40

incl. VAT plus shipping costs

Article No. 745243

Woodturning Starter Set

Woodturning Starter Set

This set includes everything you need to realise your first projects on the lathe. The set of Hattori HSS Turning Tools (No. 701850 ) is the ideal basic equipment for beginners. Cost-effective, robust turning tools made of heat-resistant...
€549.00

incl. VAT plus shipping costs

Article No. 745267

Replacement Face for Brass Mallet, POM

Replacement Face for Brass Mallet

Replacement face for brass mallet No. 714693 . 1 piece.
variants
€6.20

incl. VAT plus shipping costs

Article No. 714695

Replacement Blades for Super-Carver Wood Carving Cutter, 3 Pieces

Replacement Blades for Super-Carver Wood Carving Cutter, 3 Pieces

Fits Super-Carver Wood Carving Cutter No. 714698 . 3 pieces.
€29.90

incl. VAT plus shipping costs

Article No. 714699

Replacement Sleeves for »Power Pen« Pen Making Set

Replacement Sleeves for »Power Pen« Pen Making Set

Fits »Power Pen« pen making set (Nos. 715620 and 715621 ).
€1.20

incl. VAT plus shipping costs

Article No. 715624

Replacement Sleeves for »Cigar« Pen Making Set

Replacement Sleeves for »Cigar« Pen Making Set

Fits »Cigar« pen making set (Nos. 715625 and 715626 ).
€1.20

incl. VAT plus shipping costs

Article No. 715629

Replacement Blades for Wood-Plane Grinding Disc, 3 Pieces

Replacement Blades for Wood-Plane Grinding Disc, 3 Pieces

Fits Wood-Plane Grinding Disc No. 714696 . 3 pieces.
€37.90

incl. VAT plus shipping costs

Article No. 714697

Meat Hook, 120 x 5 mm

Meat Hook

Meat hook made of stainless steel. Pointed on both sides.
variants
€0.90

incl. VAT plus shipping costs

Article No. 790932

Meat Hook for Hoist, 120 x 5 mm

Meat Hook for Hoist

Stainless steel hook with welded eye to be used with a hoist. This makes hanging up and re-hanging much easier. Pointed on one side. Stainless steel.
variants
€1.50

incl. VAT plus shipping costs

Article No. 790934

Cutting and Punching Pad, PP, 300 x 300 x 20 mm

Cutting and Punching Pad, PP, 300 x 300 x 20 mm

Robust and sturdy cutting and punching pad made of polypropylene, ideal as an impact-resistant base for cutting or punching leather. The surface is also gentle on the knives helping to achieve a perfect cut. Punching tools can penetrate...
€29.90

incl. VAT plus shipping costs

Article No. 745264

Wall-mounted Holder for Woodturning Tools, 3 compartments

Wall-mounted Holder for Woodturning Tools

Practical holder for your woodturning tools. Always ready to hand on the wall. The distance between the lower and upper part can be selected according to the length of the tools to be stored. For tools of different lengths, you can use a...
variants
€43.90

incl. VAT plus shipping costs

Article No. 711681

Baren (Rubbing Tool) with Felt Pad

Baren (Rubbing Tool) with Felt Pad

Stamp-shaped rubbing tool made of solid wood for lino printing and other printing techniques. The 5-mm thick felt overlay ensures gentle and even pressure distribution .
€6.20

incl. VAT plus shipping costs

Article No. 731758

Oil Rollers, Set

Oil Rollers, Set

Complete set with oil roller handle (No. 820096 ) with non-slip, easy-to-clean two-component plastic handle and hanger hole. Two high-quality microfibre oil rollers (No. 820095 ) with 5 mm nap and 120 mm roller width, ideal for applying...
€7.80

incl. VAT plus shipping costs

Article No. 718628

Magnetic Base Light, Flexible Gooseneck, LED

Magnetic Base Light, Flexible Gooseneck, LED

An indispensable workshop accessory that is used especially for intricate work with bandsaws, drills, edge sanders and lathes. A powerful switchable magnetic base and a long flexible neck allow you to position the light source...
€79.00

incl. VAT plus shipping costs

Article No. 715641

Japanese Toolbox »Junior«, Filled, 36-Piece Set

Japanese Tool Box »Junior«, Filled, 36-Piece Set

This set for children and young people contains basic equipment consisting of the best high-quality Japanese hand tools that are needed for all common types of woodworking. All tools are made of high-quality steel, Japanese red oak and...
 
€569.00

incl. VAT plus shipping costs

Article No. 731800

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit 80

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit 80

Hook-and-loop replacement pads. Fits No. 731810 .
variants
€3.50

incl. VAT plus shipping costs

Article No. 731811

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit 120

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit...

Hook-and-loop replacement pads. Fits No. 731810 .
variants
€3.50

incl. VAT plus shipping costs

Article No. 731812

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit 240

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit...

Hook-and-loop replacement pads. Fits No. 731810 .
variants
€3.50

incl. VAT plus shipping costs

Article No. 731813

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit 320

Replacement Pads for »Junior« Sanding Block, 5-Piece Set, Grit...

Hook-and-loop replacement pads. Fits No. 731810 .
variants
€3.50

incl. VAT plus shipping costs

Article No. 731814

 
€22.90

incl. VAT plus shipping costs

Article No. 731816

Replacement Blades 30° for Cutter Knife 9 mm, 10-piece Set

Replacement Blades 30° for Cutter Knife 9 mm, 10-piece Set

Ten Japanese cutter blades with 30°, width 9 mm. For cutting paper, cardboard, fabrics, leather, vinyl, PVC and similar materials. Fits No. 720719 .
€3.90

incl. VAT plus shipping costs

Article No. 715208

Dust Brush, Goat Hair

Dust Brush, Goat Hair

Dust brush made of pearwood trimmed with pure goat hair, which has a natural grease layer and thus excellent dust-binding and dirt-repelling properties. The soft goat hair is gentle on delicate surfaces. Its fine structure binds the...
€16.60

incl. VAT plus shipping costs

Article No. 716290

File Brush, Steel Wire

File Brush

For cleaning file and rasp teeth. Brushhead 40 x 100 mm.
variants
€5.90

incl. VAT plus shipping costs

Article No. 704604

Replacement Clamp Strap for Chip Bag, Ø 610 mm

Replacement Clamp Strap for Chip Bag

Steel band with clamping lever and adjustable clamping width. For securely fixing the chip bags to e.g. separators of extraction systems.
€11.60

incl. VAT plus shipping costs

Article No. 725045

Workshop Cleaning Set

Workshop Cleaning Set

The solid dustpan in a powder-coated all-steel construction is just as indispensable as daily cleaning in the workshop. Thanks to its wide sweeping edge (300 mm), dust and chips can be removed quickly. The handle, made of bent tubing, is...
€19.90

incl. VAT plus shipping costs

Article No. 716259

Dustpan

Dustpan

The solid dustpan made of powder-coated all-steel is just as indispensable as daily cleaning in the workshop. Thanks to its wide sweeping edge (300 mm), dust and chips can be removed quickly. The handle, made of bent tubing, is...
€11.90

incl. VAT plus shipping costs

Article No. 716258

Chip Bags, 600 x 750 x 0.1 mm, 5 Pieces

Chip Bags, 5 Pieces

Transparent polyethylene bags suitable for extraction systems.
variants
€16.90

incl. VAT plus shipping costs

Article No. 725055

Faceplate Rubber Jaws, 8 Pieces

Faceplate Rubber Jaws, 8 Pieces

8-piece set of rubber jaws with fastening screws for faceplate segments No. 725112 .
€12.90

incl. VAT plus shipping costs

Article No. 725113

 
€9.80

incl. VAT plus shipping costs

Article No. 731831

€3.90

incl. VAT plus shipping costs

Article No. 730919

Wall-mounted Tool Holder for Chucks, M33 x 3.5 mm DIN 800

Wall-mounted Tool Holder for Chucks, M33 x 3.5 mm DIN 800

The holder, which can be mounted on the wall with two screws (included in the scope of delivery), provides organisation and safety for lathe chucks. This not only saves space but also protects the chuck from damage. Suitable for chucks...
€12.90

incl. VAT plus shipping costs

Article No. 725115

»Nagare« Wind Chime, Gold

»Nagare« Wind Chime, Gold

In Japanese mythology, »Nagare« embodies the unstoppable flowing movement and symbolises the power of water.
€9.50

incl. VAT plus shipping costs

Article No. 714828

»Mizu no shizuku« Wind Chime, Blue

»Mizu no shizuku« Wind Chime, Blue

»Mizu no Shizuku«: the gentle blue drops of water, a symbol of purity in Japanese mythology.
€9.90

incl. VAT plus shipping costs

Article No. 714829

»Tsurigane« Wind Chime, Green

»Tsurigane« Wind Chime, Green

Surface decorated in the style of a Buddhist temple bell and covered with a soft green patina.
€9.90

incl. VAT plus shipping costs

Article No. 714825

»Momiji« Wind Chime, Bronze

»Momiji« Wind Chime

In Japanese mythology, »Momiji« refers to the maple tree whose leaves glow with vibrant colours in autumn: a symbol of autumn and its beauty.
variants
€10.80

incl. VAT plus shipping costs

Article No. 714826

5-Toe Socks, 3 Pairs

5-Toe Socks, 3 Pairs

Seamlessly knitted socks with separate toes, traditionally used in Japan, offer numerous benefits. The special design noticeably improves ventilation Air can circulate freely between the toes Heat is efficiently dissipated, reducing the...
€14.80

incl. VAT plus shipping costs

Article No. 714830

Threaded Piece, Maple, Thread Ø 12.5 mm

Threaded Piece, Maple

Threaded piece with external thread and shank for glueing in, customisable length. Partial thread length 50 mm.
variants
€12.80

incl. VAT plus shipping costs

Article No. 721609

Ball Nut, Maple, Thread Ø 12.5 mm

Ball Nut, Maple

Ball nut with internal thread as a decorative element, for example for bed posts.
variants
€17.90

incl. VAT plus shipping costs

Article No. 721612

Threaded Sleeve, Maple, Thread Ø 12.5 mm

Threaded Sleeve, Maple

Threaded sleeve for glueing in, with internal thread for stable and durable connections and for height-adjustable support feet.
variants
€9.80

incl. VAT plus shipping costs

Article No. 721615