Sonstige
Products from Sonstige
Buy Sonstige products online at DICTUM.
Madder Lake from Roots
Natural colour pigments obtained from the madder root (Rubia tinctoria). An indispensable natural dye for violin varnishes. It is a natural product, therefore the colour may vary slightly depending on the batch.
€17.90
(Content: €3,580.00 / 1 kg)
incl. VAT plus shipping costs
Article No. 450109
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714444
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714446
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714442
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714445
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714440
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714441
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714449
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714448
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714447
Insert Sleeve for »Profi« Dowel Cutters
Made of aluminium. Insert sleeves for other diameters available on request.
€59.00
incl. VAT plus shipping costs
Article No. 714443
Oblong Hole Punches
Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
€69.00
incl. VAT plus shipping costs
Article No. 729499
Oblong Hole Punches
Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
€53.00
incl. VAT plus shipping costs
Article No. 729496
Oblong Hole Punches
Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
€55.60
€47.50
incl. VAT plus shipping costs
Article No. 729497
Oblong Hole Punches
Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
€119.00
incl. VAT plus shipping costs
Article No. 729501
Oblong Hole Punches
Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
€48.90
incl. VAT plus shipping costs
Article No. 729495
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€33.40
incl. VAT plus shipping costs
Article No. 729483
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€24.80
incl. VAT plus shipping costs
Article No. 729482
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€10.40
incl. VAT plus shipping costs
Article No. 729479
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€12.70
incl. VAT plus shipping costs
Article No. 729480
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€8.90
incl. VAT plus shipping costs
Article No. 729478
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€17.60
incl. VAT plus shipping costs
Article No. 729481
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€7.40
incl. VAT plus shipping costs
Article No. 729477
Arc Punches
Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
€6.40
incl. VAT plus shipping costs
Article No. 729476
Pferd Abrasive Spiral Bands, Ø 38 x 25 mm
Abrasive spiral bands in the corundum A version suitable for universal use from coarse to fine grinding. Fits No. 729571 .
€1.00
incl. VAT plus shipping costs
Article No. 729573
Fingerboards for Repair, Indian Ebony, Quality ***
These fingerboards have a larger overlap in order to fit any possible proportion and dimensions in the restoration and repair area. Deep black Indian ebony High density, no pores, no stain Straight grain Ideal for repairs
€234.00
incl. VAT plus shipping costs
Article No. 390033
Fingerboards for Repair, Indian Ebony, Quality ***
These fingerboards have a larger overlap in order to fit any possible proportion and dimensions in the restoration and repair area. Deep black Indian ebony High density, no pores, no stain Straight grain Ideal for repairs
€229.00
incl. VAT plus shipping costs
Article No. 390034
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€42.00
incl. VAT plus shipping costs
Article No. 710471
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€60.70
incl. VAT plus shipping costs
Article No. 710476
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€52.80
incl. VAT plus shipping costs
Article No. 710475
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€326.50
incl. VAT plus shipping costs
Article No. 710480
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€64.30
€54.50
incl. VAT plus shipping costs
Article No. 710477
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€42.00
incl. VAT plus shipping costs
Article No. 710472
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€51.50
€43.70
incl. VAT plus shipping costs
Article No. 710474
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€83.20
incl. VAT plus shipping costs
Article No. 710479
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€76.30
€64.80
incl. VAT plus shipping costs
Article No. 710478
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€579.90
incl. VAT plus shipping costs
Article No. 710481
D-Kumi Nomi, Chisel
These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very...
€50.30
incl. VAT plus shipping costs
Article No. 710473
Fingerboard, Ind. Ebony, Cello/ Bass, Quality**
These fingerboards are particularly suitable for new instruments. The exact proportion and dimensions with a minimum overlap help minimise labour time in the construction process.
€149.90
incl. VAT plus shipping costs
Article No. 393133
Fingerboard, Indian Ebony, Cello/ Bass, Quality *
These fingerboards are particularly suitable for new instruments. The exact proportion and dimensions with a minimum overlap help minimise labour time in the construction process.
€126.90
incl. VAT plus shipping costs
Article No. 393333
Fingerboard, Ind. Ebony, Cello/ Bass, Quality**
These fingerboards are particularly suitable for new instruments. The exact proportion and dimensions with a minimum overlap help minimise labour time in the construction process.
€149.90
incl. VAT plus shipping costs
Article No. 393134
Fingerboard, Ind. Ebony, Cello/ Bass, Quality**
These fingerboards are particularly suitable for new instruments. The exact proportion and dimensions with a minimum overlap help minimise labour time in the construction process.
€164.90
incl. VAT plus shipping costs
Article No. 393135
Pony Pipe Clamp Fixture Set, ¾ Inch, with Stand
Robust glueing clamps, optionally with or without pipe. The tail has a continuous quick multi-plate clutch for rapid adjustment. Crank handle. Set: Head and tail castings (with or without pipe).
€29.40
incl. VAT plus shipping costs
Article No. 715467
Cutter Compass Saw
Practical cutter compass saw for the workshop or on the construction site. The impulse-hardened tooth tips of the high-quality interchangeable blade cut either on the pull stroke (No. 715120 ) or on the push stroke (No. 715122 ) in wood,...
€15.90
incl. VAT plus shipping costs
Article No. 715122
Corby Screw Rivets, Brass
Corby screw rivets are ideal for joining knife handles on fully integral knives or handle scales.
€2.30
incl. VAT plus shipping costs
Article No. 790309
Piloted Counterbore, HSS, DIN 373
Piloted counterbore for countersinking cap screws. The smooth shank serves as a guide in the drill hole and the cutting diameter indicates the size of the cut for head screw and head. Ideal for the use of Corby rivets. Shaft diameter 5 mm.
€16.90
incl. VAT plus shipping costs
Article No. 729597
Corby Screw Rivets, Stainless Steel
Corby screw rivets are ideal for joining knife handles on fully integral knives or handle scales.
€2.90
incl. VAT plus shipping costs
Article No. 790310
Inserts, 10-Piece Set
Double-edged inserts suitable for cutterblocks on Shinko surface planers and thickness planers.
€59.90
incl. VAT plus shipping costs
Article No. 715481