Pfeil

Products from Pfeil

Pfeil

The production of Pfeil® knives is based on an old artisan tradition. The company was founded in 1902 in Langenthal as a knife smithy. Production of the first carving tools was started in around 1942. The high quality of the tools soon led to great popularity with professional carvers, but also with hobby carvers and schools both at home and abroad.

With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the worlds leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace and sharpened by hand ready-for-use. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.
Your advantage:

  • Quick delivery straight from stock
  • Lifetime warranty on material and workmanship! (Damage caused by improper use is not covered by this warranty)
1 of 30
Pfeil Carving Tool, Gouge/V-Parting Tool, Long Bent, Sweep 12L / 10 mm

Pfeil Carving Tool, Gouge/V-Parting Tool, Long Bent, Sweep 12L...

The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.
variants
 
€30.90

incl. VAT plus shipping costs

Article No. 700721

Pfeil Carving Tool, Gouge, Fishtail, Thin Blades, Sweep 3F / 12 mm

Pfeil Carving Tool, Gouge, Fishtail, Thin Blades, Sweep 3F /...

Thanks to their conical form, fishtail gouges are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be...
variants
 
€25.90

incl. VAT plus shipping costs

Article No. 700741

Pfeil Carving Tool, Gouge, Straight, Sweep 3 / 3 mm

Pfeil Carving Tool, Gouge, Straight, Sweep 3 / 3 mm

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. The...
variants
 
€20.50

incl. VAT plus shipping costs

Article No. 700821

Pfeil Carving Tool, Gouge, Straight, Sweep 3 / 5 mm

Pfeil Carving Tool, Gouge, Straight, Sweep 3 / 5 mm

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. The...
variants
 
€20.50

incl. VAT plus shipping costs

Article No. 700822

Pfeil Carving Tool, Chisel, Double Bevel, Sweep 1 / 8 mm

Pfeil Carving Tool, Chisel, Double Bevel, Sweep 1 / 8 mm

Straight chisels are preferred for lettering, but are also suitable for chip carving and for smoothing straight or slightly convex surfaces in figure sculpting. The skewed variant can be drawn across the surface and cuts into corners...
variants
 
€20.50

incl. VAT plus shipping costs

Article No. 700803

Pfeil Chip Carving Knife, Shape 7, Blade Width 13 mm

Pfeil Chip Carving Knife, Shape 7, Blade Width 13 mm

Chip carving knives ground and polished ready to use, with fine oiled cherry wood handles. The form and size are perfectly aligned for freehand carving of small figures, chamfering and wickerwork.
variants
 
€10.30

incl. VAT plus shipping costs

Article No. 700926

Pfeil Carving Tool, Gouge, Straight, Sweep 8 / 40 mm

Pfeil Carving Tool, Gouge, Straight, Sweep 8 / 40 mm

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. The...
variants
 
€47.60

incl. VAT plus shipping costs

Article No. 701231

Pfeil Carver's Set with Ash Handles, 25-Piece Set, Wooden Case

Pfeil Carver's Set with Ash Handles, 25-Piece Set, Wooden Case

With these 20 sculptor's tools plus accessories you are perfectly equipped for a wide range of challenging carving projects: sweep 1 (flat) / 16 mm; sweep 1 S (flat/skew) / 16 mm; sweep 2 / 20 mm; sweep 3 / 3 mm; sweep 3 / 12 mm; sweep 3...
 
€808.00

incl. VAT plus shipping costs

Article No. 700892

Pfeil Carving Tool, Gouge, Straight, Sweep 8 / 7 mm

Pfeil Carving Tool, Gouge, Straight, Sweep 8 / 7 mm

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. The...
variants
 
€21.00

incl. VAT plus shipping costs

Article No. 700851

Pfeil Allongee Gouges, Sweep 2 / 60 mm

Pfeil Allongee Gouges, Sweep 2 / 60 mm

With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
variants
 
€72.80

incl. VAT plus shipping costs

Article No. 700946

1 of 30