F. D.

Products from F. D.

F.D.® is a trademark registered by the company Friedr. Dick GmbH & Co. KG. based in Baden-Württemberg, Friedr. Dick is a family-run, medium-sized company founded in 1778 that produces cutlery (knives, scissors and accessories such as sharpening steels) and other tools for the culinary and butchery trades. The company's best-known products are files and knives. Friedrich Dick is one of the worldwide market leaders in this field.

1 of 2
F.D. Flat File, Single Cut, Cut 2, Cut Length 200 mm

F.D. Flat Files, Single Cut

Precision flat file made by long-established German company Friedrich Dick. Single cut design for high surface quality. Narrow sides cut. German cut 2.
variants
€7.40

incl. VAT plus shipping costs

Article No. 704901

F.D. Chipbreaker File, Single Cut

F.D. Chipbreaker File, Single Cut

The special diamond pattern ensures smooth gliding strokes, resulting in a smooth surface with high chip removal. The pattern also acts as a chipbreaker. Suitable for wood and soft metals such as cast iron, bronze and brass, but also for...
€10.50

incl. VAT plus shipping costs

Article No. 704446

Key Files with Wooden Handles, 6-Piece Set

Key Files with Wooden Handles, 6-Piece Set

Set of six key files with wooden handles in a traditional metal case. Ideal for precise work on metal and wood. Set contains: Flat, warding, three-square, square, half-round and round.
€42.30

incl. VAT plus shipping costs

Article No. 704447

F.D. All-purpose File, Double Cut, Cut Length 100 mm

F.D. All-purpose Files, Double Cut

Ideal for general use due to the two different cuts on the flat sides. The rough side is used to remove material quickly while the finer side is suited for surface finishing. Recommended for wood, soft metals and plastic. Plastic or...
variants
€4.40

incl. VAT plus shipping costs

Article No. 704425

F.D. Mill Saw File

F.D. Mill Saw File

The ideal file for the ambitious knife maker, who makes his own blade. The round edges help to file the transition from the blade to the ricasso, an area which is an important attribute of a high quality blade.
€9.90

incl. VAT plus shipping costs

Article No. 704411

F.D. Wood File, Half-Round, Cut 0, Length 200 mm

F.D. Wood Files, Half-Round

Special knife cut for high efficiency. Cut 0.
variants
€14.60

incl. VAT plus shipping costs

Article No. 704433

F.D. Flat Rasp, Cut Length 200 mm

F.D. Rasps

Standard rasps for working on wood, plaster and soapstone. 59-60 HRC. Cut 2.
variants
€8.50

incl. VAT plus shipping costs

Article No. 704601

F.D. Hoof Rasp File »Turf«, Blade Width 40 mm, Cut Length 300 mm

F.D. Hoof Rasp File »Turf«

Large rasp that can be used on both sides: extremely coarse machine-hewn rasp cut and very coarse file cut. Also ideal for soft woods, plastics and soapstone, etc.
variants
€27.40

incl. VAT plus shipping costs

Article No. 704563

F.D. Wood File, Cabinet, Cut 1, Length 250 mm

F.D. Wood Files, Cabinet

The classic file for cabinetmakers. Cut 1.
variants
€21.60

incl. VAT plus shipping costs

Article No. 704430

Chasing Hammer

Chasing Hammer

Chasing hammer with a large, slightly curved face for driving gravers and small punches as well as a ball-peen side for creating a hammered look. Chasing refers to the decorative texturing of metal surfaces. Ash handle.
€25.90

incl. VAT plus shipping costs

Article No. 705333

F.D. Half-Round Workshop File

F.D. Workshop File

The low-cost alternative to the precision file. Universal file for general and rough filing work on steel, iron and non-ferrous metals in industry, trades and hobbies. Plastic handle.
€10.10

incl. VAT plus shipping costs

Article No. 715104

F.D. Wood File, Cabinet, Cut 1, Length 300 mm

F.D. Wood Files, Cabinet

The classic file for cabinetmakers. Cut 1.
variants
€26.70

incl. VAT plus shipping costs

Article No. 704431

1 of 2