Oneway Live Centre System
This system is based on a two-bearing live centre with a cutting ring and a threaded shaft onto which cab be fitted with different attachments including self-made ones. Comes with a cone that can be used on both the inside and outside of...
€117.90
incl. VAT plus shipping costs
Article No. 702137
€24.00
incl. VAT plus shipping costs
Article No. 702269
€73.40
incl. VAT plus shipping costs
Article No. 720375
Sorby Steb Chuck Driver
The Sorby Steb Chuck Driver can be easily placed and clamped on your current chuck. The need for time-consuming modifications is gone. Fits chucks Talon No. 702159 /60 and Stronghold No. 702158 , SuperNOVA2 No. 720670 /71 and 720753 .
€73.40
incl. VAT plus shipping costs
Article No. 720377
Sorby Revolving Stebcentre, #2 MT
Largely inspired by Norwegian turner Petter Herud, the Revolving Stebcentre has been introduced. Not only does it offer the same degree of security as the conventional Stebcentre, but it allows the turner to do basic off-centre turning.
€86.70
incl. VAT plus shipping costs
Article No. 720381
Teknatool SuperNOVA2 Four-Tooth Spur Driver, Square Shaft
Designed for use in combination with the 50 mm dovetail jaws (No. 720673 ). The driver can simply be used on the chuck that is already installed - which means there is no need to remove it.
€24.30
incl. VAT plus shipping costs
Article No. 720700
€15.00
incl. VAT plus shipping costs
Article No. 714157
€29.90
incl. VAT plus shipping costs
Article No. 714159
Axminster Wall-mounted Tool Holder Set
Practical wall-mounted tool holders for lathe equipment as a set: for safe storage of #2 MT accessories, a set of jaws and a chuck with M33 x 3.5 mm DIN 800 thread.
€75.00
incl. VAT plus shipping costs
Article No. 730838
Axminster Revolving Live Centre 60° Standard
Standard revolving centre with 60° tapered tip and two sealed, dustproof ball bearings for a long service life.
€43.00
incl. VAT plus shipping costs
Article No. 731700
Axminster Pro Drive, Ø 21 mm
Multi-tooth spur drivers are safer, more versatile and offer higher precision than 2- or 4-tooth drivers. The tension of the spring-loaded centre point can be adjusted. This allows workpieces that are held at axis height by the centring...
€56.00
incl. VAT plus shipping costs
Article No. 731704
Axminster Pro Drive, Ø 16 mm
Multi-tooth spur drivers are safer, more versatile and offer higher precision than 2- or 4-tooth drivers. The tension of the spring-loaded centre point can be adjusted. This allows workpieces that are held at axis height by the centring...
€59.00
incl. VAT plus shipping costs
Article No. 731706
Axminster Revolving Live Centre »Deluxe«
Robust and versatile centring pin with 60° point angle. The morse taper and the replaceable centring pin are made of stainless steel. The removable cone attachment with a ¾" x 16 tpi thread is made of aluminium. A double-row angular...
€113.80
incl. VAT plus shipping costs
Article No. 731723
Axminster Multi-Head Live Revolving Centre, incl. 3 Additional...
A live centre with many application possibilities due to interchangeable tips. Supplied with a 60° standard taper for general work, a tip with 9.5 mm diameter and 16 mm length for small or delicate work and a ring tip for e.g. soft or...
€69.00
incl. VAT plus shipping costs
Article No. 731724
Axminster Tip for Multi-Head Live Revolving Centre, Conical
Offers additional application possibilities for the Axminster Multi-Head Live Revolving Centre (No. 731724 ).
€16.00
incl. VAT plus shipping costs
Article No. 731725
Axminster Tip for Multi-Head Live Revolving Centre, Pipe...
Offers additional application possibilities for the Axminster Multi-Head Live Revolving Centre (No. 731724 ).
€16.00
incl. VAT plus shipping costs
Article No. 731726
Axminster Tip for Multi-Head Live Revolving Centre, Mini...
Offers additional application possibilities for the Axminster Multi-Head Live Revolving Centre (No. 731724 ).
€21.10
incl. VAT plus shipping costs
Article No. 731727
Ball-head Vice for Hand Rests
Every woodturner knows the problem: Once the workpiece has been unclamped from the chuck, it is almost impossible to re-clamp it so that it runs smoothly. With this clamping device, turning objects to work on do not even have to be...
€135.60
incl. VAT plus shipping costs
Article No. 701200
Self-centring Faceplate
The self-centering face plate with threaded connector makes it possible to save time and patience during assembly. Anyone working with standard faceplate segments must screw on and tighten up to 16 threaded screws during assembly. The...
€161.90
incl. VAT plus shipping costs
Article No. 701209
€12.90
incl. VAT plus shipping costs
Article No. 707720
€74.90
incl. VAT plus shipping costs
Article No. 707719
HAGER Aluminium Grinding Disc, 300 mm diameter
Solid aluminium grinding disc, 300 mm diameter, for gluing on velcro bases or grinding wheels. Features a M33 x 3.5 DIN 800 thread.
€129.00
incl. VAT plus shipping costs
Article No. 706468
Axminster Faceplates
This solid steel faceplate is used for mounting open-worked workpieces or those with a larger diameter or irregular shape.
€36.00
incl. VAT plus shipping costs
Article No. 702261
Sorby Eccentric Chuck RS60
The eccentric chuck from Sorby allows you to turn countless detailed and unusual figures and shapes with complete safety and precision. It is possible to produce items in batches thanks to precise repeatability. The axis offset can be...
€377.00
incl. VAT plus shipping costs
Article No. 720382
Locking Ring ASR
Once mounted on the groove of the spindle and the groove of the clamping attachment, this locking ring prevents the clamping attachments (e.g. chuck, faceplate, etc.) from coming off or braking the lathe during operation. However, the...
€41.70
incl. VAT plus shipping costs
Article No. 720741
Drilling Jig for Lathes
Drill jig that can be clamped in the tool rest of a lathe. In combination with a hand drill, you can create accurate boreholes in the clamped turning object. By means of an indexing disc (available on special order) you can drill...
€83.10
incl. VAT plus shipping costs
Article No. 720469
Lathe Alignment Tool, #2 MT
Since many lathes have a rotating or sliding headstock, this alignment tool is an indispensable accessory. The correct alignment of the lathe centres is important, as this prevents damage to the bearings, for example. However, it also...
€19.90
incl. VAT plus shipping costs
Article No. 731489
Drill Bits Set, 8 mm, MK2
Specially developed for the production of lamp stands and for drilling through spindles and columns, this deep drill bits set is indispensable. Turn your woodturning obejcts as usual between the included spur drivers, using the...
€106.00
incl. VAT plus shipping costs
Article No. 740062
Axminster Carrier For C Jaws, #2 MT
Morse taper shank fits Axminster Type C Dovetail Jaws (No. 702246 ). This adapter will save you time-consuming changes from chuck to driver or other accessories with a #2 MT shank. Simply clamp the morse taper shank with the jaws and...
€30.90
incl. VAT plus shipping costs
Article No. 731708
Axminster Lathe Alignment Tool #2 MT/#2 MT
When resetting a rotating headstock without an exact stop or engagement on the lathe bed, e.g. to turn between centres again, the double morse taper can be used to align headstock and tailstock. For lathes with #2 MT mandrels in...
€25.10
incl. VAT plus shipping costs
Article No. 731710
Axminster Mounting Plate for Tool Posts, 75 mm
The 75 mm diameter mounting plate is screwed directly onto post No. 707882 instead of the tool rest. The mounting plate enables you to decorate, carve or drill workpieces directly on the lathe. Concentric grooves in the plate make it...
€39.90
incl. VAT plus shipping costs
Article No. 745287
Woodturning Starter Set
This set includes everything you need to realise your first projects on the lathe. The set of Hattori HSS Turning Tools (No. 701850 ) is the ideal basic equipment for beginners. Cost-effective, robust turning tools made of heat-resistant...
€564.90
incl. VAT plus shipping costs
Article No. 745267
Pen Making Starter Kit
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€77.00
incl. VAT plus shipping costs
Article No. 731505
Pen Making Starter Kit II
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€109.00
incl. VAT plus shipping costs
Article No. 721246
Pen Turning Set, #2 MT
Starter set for making ballpoint pens, neatly and practically stored in a plastic case. Includes the most important tools and utensils for turning writing utensils.
€107.50
incl. VAT plus shipping costs
Article No. 731573
Teknatool SuperNOVA2 Jaws for Pen Blanks
These unique jaws have been especially designed to make it possible to drill pen blanks/square blanks on a woodturning lathe. The advantage of having two jaws is that the blank will always be clamped in the centre, regardless of...
€37.60
incl. VAT plus shipping costs
Article No. 720693
Pen Turning Mandrel for Pens, #2 MT
Pen turning mandrel with sliding clamping shaft for manufacturing pens and smaller turning projects. Precision-made with good true running accuracy Sunken grub screw for reduced risk of injury Collet fits rod diameter 6.2 mm, working...
€41.70
incl. VAT plus shipping costs
Article No. 731510
Mandrel Support, #2 MT
The mandrel support is a recommended connecting element between the mandrel and tailstock quill. It ensures that the mandrel is guided in a pressure-free and exact manner. Improves true running accuracy and protects against damage....
€37.50
incl. VAT plus shipping costs
Article No. 731511
Finial Mandrel Kit, #2 MT
The Finial Mandrel provides pressure-free support for the fine end of a turned piece while the rest of it is being turned. The set includes three interchangeable nylon inserts in sizes 3 mm, 4.5 mm and 6 mm, which fit into the inner ring...
€46.90
incl. VAT plus shipping costs
Article No. 731518
Quick-Release Chucks ECO with Morse Taper DIN 238
Good value for money. Quick-release chuck for craft and hobby use. For use on lathes, routers and vertical drilling machines. Self-tightening and high-force clamping. No chuck key, tighten and release effortlessly by hand. Jaw opening...
€43.50
incl. VAT plus shipping costs
Article No. 705658
Magnetic Base Light
An indispensable workshop accessory that is particularly helpful in delicate woodturnery. With the long flexible arm and the 180° swivel head, you can optimally illuminate thin-walled objects and green woodwork. The magnetic base can be...
€115.70
incl. VAT plus shipping costs
Article No. 705118
COBAelite Diamond Anti Fatigue Mat, 0.9 x 1.2 m
Premium anti-fatigue mat with first-class ergonomic properties. These properties not only increase standing comfort, but also prevent back pain and other musculoskeletal disorders. The one-piece mat with increased safety has an...
€159.00
incl. VAT plus shipping costs
Article No. 706657
Axminster Wall-mounted Tool Holder for #2 MT Accessories
With the lacquered wall-mounted tool holder for #2 MT accessories, which can be fixed to the wall using three screws (not included), up to six accessories with a #2 MT morse taper can be stored within easy reach.
€24.10
incl. VAT plus shipping costs
Article No. 730840
Taper Wiper
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€8.20
incl. VAT plus shipping costs
Article No. 704262
Hope Aluminium Grinding Disc Ø 145 mm, with Velcro Coating
Handy sanding disc that fits direct onto your lathe chuck. The dovetailed recess in the back is 55 mm. Fits most standard chucks with 100 mm diameter and jaws, including super nova, Record sc4, Vicmarc, etc. Not suitable for Axminster...
€32.80
incl. VAT plus shipping costs
Article No. 707959
Extraction Hose, Ø 100 mm
Flexible, steel wire reinforced hose with rubber cuffs at each end. Ideal for mobile extractors in the workshop. The rubber cuffs can suit extraction outlets of around 100 to 110 mm diameter quickly and easily.
€91.30
incl. VAT plus shipping costs
Article No. 720546
Dust Hood
Rectangular plastic funnel with spigot to fit 100 mm extraction hoses. For collecting and extracting shavings on e.g. table saws, surface planers and wherever there are no specific extraction connectors.
€19.90
incl. VAT plus shipping costs
Article No. 720549
Silbergleit Dry Slip-additive
Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and dry...
€10.80
(Content: €43.20 / 1 litre)
incl. VAT plus shipping costs
Article No. 706178