Oneway Live Centre System
This system is based on a two-bearing live centre with a cutting ring and a threaded shaft onto which cab be fitted with different attachments including self-made ones. Comes with a cone that can be used on both the inside and outside of...
€117.90
incl. VAT plus shipping costs
Article No. 702137
€24.00
incl. VAT plus shipping costs
Article No. 702269
€73.40
incl. VAT plus shipping costs
Article No. 720375
Sorby Steb Chuck Driver
The Sorby Steb Chuck Driver can be easily placed and clamped on your current chuck. The need for time-consuming modifications is gone. Fits chucks Talon No. 702159 /60 and Stronghold No. 702158 , SuperNOVA2 No. 720670 /71 and 720753 .
€73.40
incl. VAT plus shipping costs
Article No. 720377
Sorby Revolving Stebcentre, #2 MT
Largely inspired by Norwegian turner Petter Herud, the Revolving Stebcentre has been introduced. Not only does it offer the same degree of security as the conventional Stebcentre, but it allows the turner to do basic off-centre turning.
€86.70
incl. VAT plus shipping costs
Article No. 720381
Teknatool SuperNOVA2 Four-Tooth Spur Driver, Square Shaft
Designed for use in combination with the 50 mm dovetail jaws (No. 720673 ). The driver can simply be used on the chuck that is already installed - which means there is no need to remove it.
€24.30
incl. VAT plus shipping costs
Article No. 720700
€15.00
incl. VAT plus shipping costs
Article No. 714157
€29.90
incl. VAT plus shipping costs
Article No. 714159
Axminster Wall-mounted Tool Holder Set
Practical wall-mounted tool holders for lathe equipment as a set: for safe storage of #2 MT accessories, a set of jaws and a chuck with M33 x 3.5 mm DIN 800 thread.
€75.00
incl. VAT plus shipping costs
Article No. 730838
Axminster Revolving Live Centre 60° Standard
Standard revolving centre with 60° tapered tip and two sealed, dustproof ball bearings for a long service life.
€43.00
incl. VAT plus shipping costs
Article No. 731700
Axminster Pro Drive, Ø 21 mm
Multi-tooth spur drivers are safer, more versatile and offer higher precision than 2- or 4-tooth drivers. The tension of the spring-loaded centre point can be adjusted. This allows workpieces that are held at axis height by the centring...
€56.00
incl. VAT plus shipping costs
Article No. 731704
Axminster Pro Drive, Ø 16 mm
Multi-tooth spur drivers are safer, more versatile and offer higher precision than 2- or 4-tooth drivers. The tension of the spring-loaded centre point can be adjusted. This allows workpieces that are held at axis height by the centring...
€59.00
incl. VAT plus shipping costs
Article No. 731706