Axminster Lathe Craft AC305WL
High functionality on a budget
For beginners and hobbyists who are looking for a low-cost solution. This small, yet robust benchtop lathe offers much of the functionality of large lathes. Variable spindle speeds with electronic speed control from 500 to 4080 rpm, cast iron bed for minimal vibrations during operation, cast iron headstock and tailstock provide rigidity, strength and long service life, quick-release levers for easy positioning of the tool rest and tailstock. An additional bed extension (No. 706525) allows a distance between centres of 1100 mm. The machines come with an adapter so you can use the UK plugs in Europe.Specifications:
- Height of centre over bed 152 mm
- Distance between centres 370 mm
- Speed ranges 500-2040 / 1000-4080 rpm
- Hollow spindle Ø 30 mm (#2 MT inner cone) with 1 inch x 8 tpi thread and two bearings
- Hollow tailstock (10 mm bore) with #2 MT quill (50 mm travel) and measuring scale
- Motor 0.55 kW (0.75 hp)
- Motor rating 230 V
- Length 820 mm
- Width 280 mm
- Height 440 mm
- Weight 40 kg
- Tool rest 150 mm and tailstock
- #2 MT four-tooth spur driver Ø 25 mm
- 75 mm faceplate
- #2 MT revolving centre
- Knockout rod
- Comes with German and English instructions
Axminster Craft Series
The inexpensive Axminster Craft machine range is ideal for beginners. When it comes to functionality, the Craft series offers almost the same as expensive professional machines, but is designed for lighter work and approx. 100 hours of use per year. The quality and performance of the machines fit the requirements of most hobby applications.
All machine parts are also available as spare parts.
All machine parts are also available as spare parts.
- Engine power 0.55 kW (0.75 hp)
- Speed 500-2040 / 1000-4080 rpm
- Speed control double belt pulley / electronic speed control
- Mains connection 230 V
- Morse taper #2 MT
- Overall length 820 mm
- Height 440 mm
- Centre height 152 mm
- Distance between centres 370 mm
- Hollow spindle Ø 30 mm (#2 MT inner cone)
- Thread 1 inch x 8 tpi
- Tailstock 10 mm bore and #2 MT quill
- Tailstock stroke 50 mm
- Tool support 150 mm
- Weight 40 kg
- Typ Desktop lathe
| Article no. | 706520 |
| Brand | Axminster |
Accessories
Silbergleit Dry Slip-additive, 250 ml
Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and...
€10.90
(Content: €43.60 / 1 litre)
incl. VAT plus shipping costs
Article No. 706178
Taper Wiper, #2 MT
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€9.00
incl. VAT plus shipping costs
Article No. 704263
Bed Extension for Axminster Lathe Craft AC305WL
Providing 1100 mm between centres Enables turning of table legs, standard lamps etc. Solid cast iron construction Supplied with fixing bolts and rubber feet Length 675 mm Weight 10.5 kg
€113.00
incl. VAT plus shipping costs
Article No. 706525
Magnetic Base Light, Flexible Gooseneck, LED
An indispensable workshop accessory that is used especially for intricate work with bandsaws, drills, edge sanders and lathes. A powerful switchable magnetic base and a long flexible neck allow you to position the light source...
€79.00
incl. VAT plus shipping costs
Article No. 715641
Drechseln, Maschinen-Werkzeuge-Techniken
This book may well be the most renowned introduction to the fascinating art of woodturning in the world. Whether spindle, end grain or faceplate turning or threading, it describes all the basic techniques in detailed step-by-step...
€42.00
incl. VAT plus shipping costs
Article No. 713672