21 of 21
Woolpower Knee-Length Socks, Black, 400 g/m², Size 36-39

Woolpower Knee-Length Socks, Black, 400 g/m²

Thicker knee-length socks. They enhance heat-insulation, keep your feet comfortably warm and protect against wetness and cold weather.
variants
€28.90

incl. VAT plus shipping costs

Article No. 815023

Tormek Grinding Wheel Blackstone Silicon SB-250, Grit 220

Tormek Grinding Wheel Blackstone Silicon SB-250, Grit 220

Ideal for exceptionally hard materials such as HSS, but also carbon steel. The hardness, shape and size of the abrasive make it highly effective. Black silicon carbide abrasive.
€189.00

incl. VAT plus shipping costs

Article No. 705456

Tormek Grinding Wheel SJ-250, Grit 4000

Tormek Grinding Wheel SJ-250, Grit 4000

Extreme polishing performance with hard bond. Particularly recommended for chrome-vanadium steel but also for HSS blades and double-layered steel.
€289.00

incl. VAT plus shipping costs

Article No. 705457

€68.90

incl. VAT plus shipping costs

Article No. 705603

Japanese Camellia Oil, 100 ml

Japanese Camellia Oil

This extremely light oil is extracted from the leaves of the Japanese camellia tree and a superb corrosion inhibitor for tools of all kind. Camellia oil is not susceptible to resinification and may also be used for cleaning, sharpening...
variants
€7.80

(Content: €78.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 713800

Woolpower Cardigan, Black, 600 g/m², Size XS

Woolpower Cardigan, Black, 600 g/m²

Very warm cardigan with thick collar and a full length zipper. Cuffs have thumb holes. The back is longer to prevent undesired ingress of coldness.
variants
€183.50

incl. VAT plus shipping costs

Article No. 815010

Gränsfors Synthetic Sharpening Stone for Axes

Gränsfors Synthetic Sharpening Stone for Axes

Synthetic sharpening stone with coarse 180 grit for pre-sharpening and a fine 600 grit side for honing. The rubber case protects the stone during transport and acts as a handle. Bevelled edges to prevent breakouts. Can be used with water...
€35.90

incl. VAT plus shipping costs

Article No. 705584

Paddle Strop, Two-sided

Paddle Strop, Two-sided

These strops can be used with or without paste to polish tool blades. If necessary, you can use finishing paste on the black (rougher) side; the fine brown side is usually used for stropping without paste. Can be held by the handle or...
€43.40

incl. VAT plus shipping costs

Article No. 709162

Woolpower Sweater, Green, 400 g/m², Size XS

Woolpower Sweater, Green, 400 g/m²

Sweater with short collar and zipper. The back is longer to prevent undesired ingress of coldness.
variants
€129.60

incl. VAT plus shipping costs

Article No. 815005

Ballistol All-purpose Oil, Glass Bottle, 50 ml

Ballistol All-purpose Oil

Ballistol provides reliable rust protection, cleans and oils metals, impregnates and preserves leather and wood surfaces, and is even suitable for the disinfection of minor cuts. In the garden it can be used to treat tree cancer and to...
variants
€3.30

(Content: €66.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 705270

Woolpower Long-Sleeved Crewneck, Black, 200 g/m², Size S

Woolpower Long-Sleeved Crewneck, Black, 200 g/m²

Long-sleeved crewneck shirt with round collar. The back is longer to prevent undesired ingress of coldness. Cuffs are knitted in.
variants
€85.60

incl. VAT plus shipping costs

Article No. 815000

Bamboo Oil Pot »Aburatsubo«

Bamboo Oil Pot »Aburatsubo«

Bamboo pot with lid (without content). Filled with cotton wool, it can be used as an Aburatsubo. Use with camellia oil (not included). This naturally shaped container is also ideal for the storage of small and valuable objects.
€6.90

incl. VAT plus shipping costs

Article No. 713812

Woolpower Sport Socks Logo, Black, 400 g/m², Size 36-39

Woolpower Sport Socks Logo, Black, 400 g/m²

These thicker socks enhance heat-insulating, keep your feet comfortably warm and protect against wetness and cold weather.
variants
€20.80

incl. VAT plus shipping costs

Article No. 815020

Shinko Sharpening Machine, Stone included

Shinko Sharpening Machine, Stone included

The Shinko sharpening system enables you to achieve professional sharpening results. Clogging rarely occurs with open-pored Japanese waterstones. Water cooling and flat grinding produces long-lasting and strong edges. Since no heat is...
€289.00

incl. VAT plus shipping costs

Article No. 716020

Tormek Bench Grinder Mounting Set BGM-100

Tormek Bench Grinder Mounting Set BGM-100

Though primarily designed for turners, this mounting set, in combination with the gouge jig (SVD-186 R), the multi jig (SVS-50) and the tool rest (SVD-110), allows you to sharpen all turning tools with the Tormek system also on a...
€79.90

incl. VAT plus shipping costs

Article No. 705225

Tormek Grinding Wheel SJ-200, Grit 4000

Tormek Grinding Wheel SJ-200, Grit 4000

Extreme polishing performance for mirror surfaces, thanks to hard bond. Particularly recommended for chrome-vanadium steel but also for HSS blades and double-layered steel.
€209.00

incl. VAT plus shipping costs

Article No. 705458

Polishing Paste, Extra-Fine

Polishing Pastes

These wax-like polishing pastes are applied to felt buffing wheels and smooth leather sides of strops. No. 705265 only for steel/stainless steel, No. 705264 , No. 705266 and No. 705459 also for aluminium.
variants
€4.30

(Content: €23.89 / 1 kg)

incl. VAT plus shipping costs

Article No. 705459

Woolpower Lite Tee, black, Short Sleeved, XS

Woolpower Lite Tee, black, Short Sleeved

Short sleeved crew neck undershirt. The back is longer to provide additional protection against the cold. The raglan cut sleeves prevent seam rub.
variants
€79.90

incl. VAT plus shipping costs

Article No. 815036

Woolpower Lite Long Johns, Men's, M

Woolpower Lite Long Johns, Men's

Long Johns for men. No fly. Elastic waistband with Woolpower logo stitched in.
variants
€74.90

incl. VAT plus shipping costs

Article No. 815047

Tormek Converter OWC-1

Tormek Converter OWC-1

Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.
€14.50

incl. VAT plus shipping costs

Article No. 705353

Magna-Tec Delta-S Replacement Stone, Grit 220

Magna-Tec Delta-S Replacement Stones

Original Naniwa Specialty Stone, fits Magna-Tec Delta-S sharpening system (No. 708560 ). 125 mm x 22 mm x 10 mm.
variants
€36.00

incl. VAT plus shipping costs

Article No. 708564

Tormek Original Replacement Grinding Wheel SG-250, Grit 220

Tormek Original Replacement Grinding Wheel SG-250, Grit 220

This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
€159.00

incl. VAT plus shipping costs

Article No. 705201

Tormek Original Replacement Grinding Wheel SG-200, Grit 220

Tormek Original Replacement Grinding Wheel SG-200, Grit 220

This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
€99.90

incl. VAT plus shipping costs

Article No. 705196

variants
€39.90

incl. VAT plus shipping costs

Article No. 705203

Tormek Multi Jig SVS-50

Tormek Multi Jig SVS-50

Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.
€52.90

incl. VAT plus shipping costs

Article No. 705229

Tormek Square Edge Jig SE-77

Tormek Square Edge Jig SE-77

For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).
€69.00

incl. VAT plus shipping costs

Article No. 716035

Tormek Axe Jig SVA-170

Tormek Axe Jig SVA-170

For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).
€14.90

incl. VAT plus shipping costs

Article No. 705228

Tormek Tool Rest SVD-110

Tormek Tool Rest SVD-110

For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.
€30.90

incl. VAT plus shipping costs

Article No. 705218

Tormek Drill Bit Sharpening Attachment DBS-22

Tormek Drill Bit Sharpening Attachment DBS-22

Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...
€205.00

incl. VAT plus shipping costs

Article No. 705231

Tormek Stone Grader SP-650

Tormek Stone Grader SP-650

For regrading and dressing Tormek sharpening stones.
€24.90

incl. VAT plus shipping costs

Article No. 705209

Tormek Small Knife Holder SVM-00

Tormek Small Knife Holder SVM-00

Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.
€31.80

incl. VAT plus shipping costs

Article No. 705232

Tormek Short Tool Jig SVS-38

Tormek Short Tool Jig SVS-38

For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
€21.60

incl. VAT plus shipping costs

Article No. 705239

Tormek Profiled Leather Honing Wheel LA-120

Tormek Profiled Leather Honing Wheel LA-120

For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.
€50.90

incl. VAT plus shipping costs

Article No. 705227

Tormek Turning Tool Setter TTS-100

Tormek Turning Tool Setter TTS-100

For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
€24.90

incl. VAT plus shipping costs

Article No. 705237

Tormek Adjustable Trueing Tool TT-50

Tormek Adjustable Trueing Tool TT-50

With diamond tip, for trueing ingrained or unround grinding wheels.
€72.00

incl. VAT plus shipping costs

Article No. 705210

Tormek Scissors Jig SVX-150

Tormek Scissors Jig SVX-150

For all straight scissors' blades. Demountable hedge shears up to max. 200 mm. Blade thickness max. 9 mm
€44.90

incl. VAT plus shipping costs

Article No. 705205

Tormek Gouge Jig SVD-186 R

Tormek Gouge Jig SVD-186 R

For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.
€84.90

incl. VAT plus shipping costs

Article No. 716033

Replacement Blade for Casström Gutting Saw No. 7

Replacement Blade for Casström Gutting Saw No. 7

Saw blade for Casström gutting saw No. 7, No. 727491 . Blade length 70 mm, hardness 58-59 HRC. * Steel analysis: C = 0.8 / Mn = 0.4 / Cr = 13 / Mo = 0.15 / V = 0.1 / Ni = 0.15
€10.40

incl. VAT plus shipping costs

Article No. 727492

Replacement Blade for Casström Gutting Saw No. 11

Replacement Blade for Casström Gutting Saw No. 11

Saw blade for Casström gutting saw No. 11, No. 727493 . Blade length 110 mm, hardness 58-59 HRC. * Steel analysis: C = 0.8 / Mn = 0.4 / Cr = 13 / Mo = 0.15 / V = 0.1 / Ni = 0.15
€12.40

incl. VAT plus shipping costs

Article No. 727494

21 of 21