DICTUM Plane Blade Jig SHV-77
This variable grinding jig for plane blades up to max. 77 mm width can be tilted +/- 5° by means of additional adjusting screws. This allows plane blades to be fixed and sharpened at precise angles. By turning back both adjusting screws,...
€39.90
incl. VAT plus shipping costs
Article No. 721051
Adaptor Flange with Precision Disc, Bore 12.7 mm
The flange reduces the 32 mm standard bore of the grinding wheels to the 12.7 shaft diameter. It ensures an extremely smooth-running wheel in both axial and radial directions, and even better grinding results. Made in steel.
€12.90
incl. VAT plus shipping costs
Article No. 820908
DICTUM Universal Jig 90° SU-77
For straight cutting edges such as plane blades, chisels and paring chisels. A fence aligns the clamped blades at a 90° angle. Clamping width max. 77 mm. Suitable for sharpening machines with guide rod diameter 12 mm.
€24.30
incl. VAT plus shipping costs
Article No. 721037
DICTUM Diamond Grinding Wheel Dresser
Before using a new grinding wheel and when dealing with uneven and worn-out grinding wheels, it is important to true them. This process ensures that new wheels have precise concentricity (new wheels often run slightly eccentrically), and...
€54.90
incl. VAT plus shipping costs
Article No. 729884
DICTUM Stone Grader
The stone grader can be used to change or influence the grit of your grinding wheel. A 220 grit grinding wheel can be changed to a fine grit of approx. 1000 by pressing the fine side of the stone grader onto the running wheel. To reset...
€19.90
incl. VAT plus shipping costs
Article No. 721040
Setting Gauge for Sharpening Guides, Basic
For setting the bevel angles for sharpening guides on water-cooled grinders or double-wheeled grinders. The grinding wheel diameter and the desired bevel angle are set on the gauge and then transferred to the chisel or plane blade...
€19.90
incl. VAT plus shipping costs
Article No. 721043
Leather Honing Wheel for DICTUM Water-cooled Grinder
After sharpening the blades on the grinding wheel, you can switch to a leather honing wheel. In combination with the Polishing and Honing Paste (No. 705055 ), this removes burrs quickly and reliably and leaves a perfectly polished edge....
€34.90
incl. VAT plus shipping costs
Article No. 830592
Water Deflector for DICTUM Water-cooled Grinder
The water deflector has two magnets and is simply attached to the side plate of the wet grinding machine. Dripping water that falls onto the housing, especially when processing wide blades, is thus drained off via the side plate into the...
€16.90
incl. VAT plus shipping costs
Article No. 714570
€12.90
incl. VAT plus shipping costs
Article No. 714579
Star Knob for DICTUM Water-cooled Grinder
Low-shaped star knob. Brass insert with M12 thread. Fits DICTUM Water-cooled Grinder No. 707799 .
€6.90
incl. VAT plus shipping costs
Article No. 714571
Rubberised Magnet for Water Container
This magnet with rubber coat can be put into the water container of any water-cooled grinder. The removed metal particles adhere to the magnet and thus no longer contaminate the cooling water. The magnet can then be easily removed from...
€4.90
incl. VAT plus shipping costs
Article No. 714569
Plastic Bearing for DICTUM Water-cooled Grinder
Plain bearing with collar, internal/external diameter 15/21 mm, length 10 mm. Fits DICTUM Water-cooled Grinder No. 707799 .
€1.90
incl. VAT plus shipping costs
Article No. 714561
Internal Clamping Flange for DICTUM Water-cooled Grinder
This clamping flange is fitted behind the grinding wheel of the DICTUM Water-cooled Grinder (No. 707799 ). Internal/external diameter 12/50 mm.
€19.50
incl. VAT plus shipping costs
Article No. 714568
External Clamping Flange for DICTUM Water-cooled Grinder
This clamping flange is placed on the grinding wheel on the DICTUM Water-cooled Grinder (No. 707799 ). It distributes the contact pressure of the knurled nut. Internal/external diameter 12/50 mm.
€12.90
incl. VAT plus shipping costs
Article No. 830595
Knurled Nut for DICTUM Water-cooled Grinder
Knurled nut with M12 left-hand thread for pressing the grinding wheel to the DICTUM Water-cooled Grinder No. 707799 .
€14.90
incl. VAT plus shipping costs
Article No. 729527
Water Container for DICTUM Water-cooled Grinder
Plastic water container for hanging on the side plate of the DICTUM Water-cooled Grinder No. 707799 .
€14.90
incl. VAT plus shipping costs
Article No. 830583
Main Shaft for DICTUM Water-cooled Grinder
Stainless steel shaft for connecting the grinding stone to the drive wheel. Fits DICTUM Water-cooled Grinder No. 707799 .
€29.00
incl. VAT plus shipping costs
Article No. 729517
DICTUM Support Arm for Sharpening Guides
The support arm with 12 mm diameter fits all common sharpening guides with 12 mm holder. It is the connection between the machine and sharpening guide. When sharpening without a support, it serves as a hand rest. A knurled nut allows...
€49.90
incl. VAT plus shipping costs
Article No. 720807
Drive Wheel with Silicone Band for DICTUM Water-cooled Grinder
Outer diameter 185 mm, inner diameter 12 mm. Fits DICTUM Water-cooled Grinder No. 707799 .
€19.90
incl. VAT plus shipping costs
Article No. 830587
DICTUM Sharpening Buddy
Multifunctional jig for sharpening chisels and plane blades. Control device, bevel setter and setting gauge with fence (for setting the blade protrusion on sharpening jigs) combined in one gauge. The perfect companion for sharpening and...
€29.90
incl. VAT plus shipping costs
Article No. 714649
Tormek T-4 Original »Bushcraft«, incl. Special Accessories
The »Bushcraft« version of the Tormek T-4 Original is in green colour especially designed for hunters and outdoor fans also contains jigs for knives and axes. »Tormek Original« sharpening stone, grit 220, Ø 200 x 40 mm; leather honing...
€469.00
incl. VAT plus shipping costs
Article No. 716037
Tormek T-8 Original incl. Hand Tool Kit HTK-806
Die Tormek T-8 Original ist ein leistungsfähiges, vielseitiges, wassergekühltes Schleifsystem, das alles hat, was Sie zum professionellen Schleifen benötigen. Das fortschrittliche Design und die Benutzerfreundlichkeit bieten Ihnen die...
€902.00
incl. VAT plus shipping costs
Article No. 716055
Tormek T-8 Original with DE-250 Diamond Grinding Wheel, Grit 1200
Die Tormek T-8 Original ist ein leistungsfähiges, vielseitiges, wassergekühltes Schleifsystem, das alles hat, was Sie zum professionellen Schleifen benötigen. Das fortschrittliche Design und die Benutzerfreundlichkeit bieten Ihnen die...
€869.00
incl. VAT plus shipping costs
Article No. 716053
Shinko Sharpening Machine, Set with 3 Stones
Machine including three waterstones (grits 280, 1000 and 6000).
€339.00
incl. VAT plus shipping costs
Article No. 716024
Shinko Sharpening Machine, Stone included
The Shinko sharpening system enables you to achieve professional sharpening results. Clogging rarely occurs with open-pored Japanese waterstones. Water cooling and flat grinding produces long-lasting and strong edges. Since no heat is...
€289.00
incl. VAT plus shipping costs
Article No. 716020
DICTUM Low-speed Grinder DS 150 L
Low-speed grinder: due to a speed of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually operate with 3000 rpm Wheel width 40 mm, an unbeatable advantage, especially when sharpening...
€235.00
incl. VAT plus shipping costs
Article No. 720782
DICTUM Low-speed Grinder DS 150 L with DICTUM CBN Grinding Wheel
Low-speed grinder: due to a speed of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually have a speed range of more than 3000 rpm Wheel width 40 mm, an unbeatable advantage, especially...
€399.00
incl. VAT plus shipping costs
Article No. 711241
DICTUM Low-speed Grinder DS 150 L incl. Belt Grinding Device...
Low-speed grinder: Due to a speed of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually have a speed range of more than 3000 rpm Disc width 40 mm: an unbeatable advantage, especially...
€345.00
incl. VAT plus shipping costs
Article No. 711259
DICTUM Belt Grinding Device BS 50/55, fits Low-speed Grinder...
With the Belt Grinding Device, the DICTUM Low-speed Grinder DS 150 L becomes even more versatile. By using abrasive belts of 50 mm or 55 mm width on the right side of the machine and the abrasive wheel on the left side, the low-speed...
€119.00
incl. VAT plus shipping costs
Article No. 711284
€69.90
incl. VAT plus shipping costs
Article No. 716021
€70.80
incl. VAT plus shipping costs
Article No. 716022
€89.90
incl. VAT plus shipping costs
Article No. 716023
DICTUM »Ultra-Speed« Grinding Wheel, Grit 220
For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
€164.00
€139.00
incl. VAT plus shipping costs
Article No. 727847
DICTUM »Ultra-Speed« Grinding Wheel, Grit 1000
For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
€199.00
incl. VAT plus shipping costs
Article No. 727849
DICTUM »Ultra-Speed« Grinding Wheel, Grit 3000
For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
€249.00
incl. VAT plus shipping costs
Article No. 727850
DICTUM »Carbon Cut« Grinding Wheel, Grit 80
Extra-coarse wheel with hard bond for repairing damaged tool blades. Primarily suitable for double-layered blades and carbon steel. Aluminium oxide abrasive.
€129.00
incl. VAT plus shipping costs
Article No. 716030
DICTUM Japanese Grinding Wheel, Grit 1000
Suitable for HSS as well as carbon steel and double-layered steel. Hard bond for highly effective polishing with little abrasion.
€149.90
incl. VAT plus shipping costs
Article No. 716040
Tormek Original Replacement Grinding Wheel SG-200, Grit 220
This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
€104.00
incl. VAT plus shipping costs
Article No. 705196
Tormek Original Replacement Grinding Wheel SG-250, Grit 220
This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
€169.00
incl. VAT plus shipping costs
Article No. 705201
Tormek Grinding Wheel SJ-200, Grit 4000
Extreme polishing performance for mirror surfaces, thanks to hard bond. Particularly recommended for chrome-vanadium steel but also for HSS blades and double-layered steel.
€219.00
incl. VAT plus shipping costs
Article No. 705458
Tormek Grinding Wheel SJ-250, Grit 4000
Extreme polishing performance with hard bond. Particularly recommended for chrome-vanadium steel but also for HSS blades and double-layered steel.
€309.00
incl. VAT plus shipping costs
Article No. 705457
Tormek Diamond Grinding Wheel DC-250, Grit 360
Diamond grinding wheel for quick and effective material removal, ideal for pre-grinding dull blades or repairing blades with nicks. Incl. Tormek ACC-150 anti-corrosion concentrate (150 ml, No. 716077 ). It is advisable to use diamond...
€294.00
incl. VAT plus shipping costs
Article No. 716080
Tormek Diamond Grinding Wheel DF-250, Grit 600
Universal diamond grinding wheel, combines effective material removal and fine finish. Ideal for chisels and plane blades. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding...
€284.00
incl. VAT plus shipping costs
Article No. 716079
Tormek Diamond Grinding Wheel DE-250, Grit 1200
Diamond grinding wheel for a very fine finish. Ideal for carving gouges and knives. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding wheels for wet grinding only as this...
€284.00
incl. VAT plus shipping costs
Article No. 716078
Tormek Anti-corrosion Concentrate ACC-150
For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.
€39.60
(Content: €132.00 / 1 litre)
incl. VAT plus shipping costs
Article No. 716077
Tormek Replacement Honing Compound PA-70
The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...
€10.90
(Content: €155.71 / 1 kg)
incl. VAT plus shipping costs
Article No. 705213
Tormek Rubber Work Mat RM-533
This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...
€50.50
incl. VAT plus shipping costs
Article No. 705198
Tormek Rotating Base
Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.
€49.40
incl. VAT plus shipping costs
Article No. 705221