Klemmsia Hold-down Clamp Mini Adapter, Basic, Shaft 19 mm
The body of the hold-down clamp is the same as that of the Klemmsia clamps. It can be used for clamping down workpieces or converted into a standard clamp by means of the attached screw mechanism in the perforated stud system. It can...
€38.30
incl. VAT plus shipping costs
Article No. 708133
MATCHFIT Dovetail Set
Build your ultimate, universally compatible guide rail system for an almost limitless range of applications. The MATCHFIT dovetail set is to be inserted into matching grooves which you can mill according to your needs with the dovetail...
€19.90
incl. VAT plus shipping costs
Article No. 718007
UJK Cam & Wedge Clamping Set
The UJK Cam & Wedge set is an exceptionally useful accessory for a multifunction table. It allows you to clamp a workpiece leaving its top free from any obstruction for routing, sanding, carving etc. The set consists of three 20 mm...
€56.10
incl. VAT plus shipping costs
Article No. 715439
Drill Clamp with Ball Joint, Euro Collar 43 mm
Thanks to the sturdy drill clamp with ball joint made of aluminium by Kaindl, drills or angle grinders with Euro collar Ø 43 mm can be securely fixed to a workbench having a maximum board thickness of 65 mm. The ball joint can be rotated...
€38.50
incl. VAT plus shipping costs
Article No. 707749
MATCHFIT Dovetail Screw Clamps, 2-piece Set
The clamping arm of the MATCHFIT dovetail screw clamp inserts into matching grooves which you can mill according to your needs with the dovetail cutter No. 717798 . Build a stable work surface, increase the height of the stop of your...
€54.60
incl. VAT plus shipping costs
Article No. 718006
MATCHFIT X-PAD, 4-piece Set
The X-PAD is an upgrade for the MATCHFIT dovetail screw clamps. Simply slide the X-PAD onto the round cap and you will have a completely new functional level, which allows you to clamp in two directions simultaneously. Fits No. 718006 .
€17.70
incl. VAT plus shipping costs
Article No. 718051
Milescraft »ClampAnchor« for »TrackMaster« Hold Down Clamp
Easily position and mount ClampAnchors where you need them on your workbench ClampAnchors are the ideal mounting hardware for the Milescraft »TrackMaster« Hold Down Clamp (No. 714539 ). The anchor base is installed flush with the surface...
€27.50
incl. VAT plus shipping costs
Article No. 714534
Milescraft »TrackMaster« Hold Down Clamp
The hold down clamp is perfect for holding workpieces in place when drilling, milling, cutting, etc. With the accessories supplied, it can be inserted into most commercially available T-slots and machine tables. Combined with Milescraft...
€42.30
incl. VAT plus shipping costs
Article No. 714539
Replacement Jaw for Positioning Square Right Angle Clamp
These clamping jaws can be used to clamp various 90° angles to workpiece corners for assembly or glueing. This facilitates exact 90° assembly. Clamping jaw made of aluminium. Fits Positioning Square Right Angle Clamp incl. Jaws, No....
€7.50
incl. VAT plus shipping costs
Article No. 714515
Positioning Square Right Angle Clamp incl. Jaws, 120 mm
Precise 90° square with 120 mm leg length and holes for positioning clamping jaws. Used as an assembly or glueing aid, the square is clamped to the workpiece corner (inside or outside) to facilitate accurate 90° assembly. The recess on...
€36.00
incl. VAT plus shipping costs
Article No. 714514
Veritas Carver’s Seat Vice
This versatile carver's seat vice made of lightweight, warp-free birch multiplex can be used wherever there is seating. Your own body weight secures the base to a chair, stool or bench. The position of the workpiece can be adjusted in...
€72.30
incl. VAT plus shipping costs
Article No. 704266
Surface Clamp
Equipped with a clamping bolt, the hold-down clamp can be anchored in holes of 19-20 mm. Ideal for working on multifunction tables or workbenches. The split bolt at the lower end of the shaft is inserted into the bore and tightened from...
€74.90
incl. VAT plus shipping costs
Article No. 714638